hwFatApRadioWorkMode
HUAWEI-WLAN-CONFIGURATION-MIB ·
.1.3.6.1.4.1.2011.6.139.11.1.60.2.1.17
Object
column
r/w
Enumeration
This object indicates the radio working mode. The default value is 1.
Context
- MIB
- HUAWEI-WLAN-CONFIGURATION-MIB
- OID
.1.3.6.1.4.1.2011.6.139.11.1.60.2.1.17- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwFatApRadioEntry
- Table
- hwFatApRadioTable
- Siblings
- 24
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | normal |
2 | monitor |
3 | dualband |
4 | proxyScan |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwFatApRadio Description. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.60.2.1.1 |
| hwFatApWdsWhitelistProfile This object indicates the bound whitelist profile. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.60.2.1.10 |
| hwFatApRadioSwitch This object indicates the name of a 2G radio profile. It is the index of the table. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.60.2.1.11 |
| hwFatApRadioChannel This object indicates a radio-frequency channel. For 2.4G, the value ranges from 1 to 13. For 5G, the value ranges from 36 to 165 (with a separation interval of 4). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.60.2.1.12 |
| hwFatApRadioBandwidth This object indicate a bandwidth. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.60.2.1.13 |
| hwFatApRadioEirp This object indicates a power value. The default value is 127. The configuration is saved but the actual power is determined by the maximum power supported by the AP. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.60.2.1.14 |
| hwFatApRadioAntennaGain This object indicates antenna gains. The default value 0xFF indicates that the default gain of an AP is used. It is expressed in dB. Default gains vary with different types of APs. | column | Integer32 | .1.3.6.1.4.1.2011.6.139.11.1.60.2.1.15 |
| hwFatApRadioCoverageDistance This object indicates a radio coverage distance. The default value is 3. The unit is 0.1 km. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.60.2.1.16 |
| hwFatApWidsDeviceDetectSwitch This object indicates the status of the device detection function. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.60.2.1.18 |
| hwFatApWidsAttackDetectEnBmp This object indicates the bit map of the brute force attack switch. bit0:weak-iv, bit1:spoof, bit2:flood, bit3:wpa-psk, bit4:wpa2-psk, bit5:wapi-psk, bit6:wep-psk. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.60.2.1.19 |
| hwFatApRadio0Frequency Description. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.60.2.1.2 |
| hwFatApWidsRogueContainSwitch This object indicates the status of the device detection function. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.60.2.1.20 |
| hwFatApRadioSecondChannel This object indicates a radio-frequency channel. The value ranges from 42,58,106,122,138,155. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.60.2.1.21 |
| hwFatApAutoChannelSelectSwitch This object indicates the status of the automatic channel selection function. The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.60.2.1.22 |
| hwFatApAutoTxPowerSelectSwitch This object indicates the status of the automatic power selection function. The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.60.2.1.23 |
| hwFatApCalibrateFlexibleRadioSwitch This object indicates the status of the calibrate flexible-radio switch function. The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.60.2.1.24 |
| hwFatApAutoBandwidthSelectSwitch This object indicates the status of the automatic bandwidth selection function. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.60.2.1.25 |
| hwFatApReferenceDataAnalysis This object indicates the status of the referencing data-analysis function. The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.60.2.1.26 |
| hwFatApRadio2gProfile Description. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.60.2.1.3 |
| hwFatApRadio5gProfile Description. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.60.2.1.4 |
| hwFatApRadioMeshProfile Description. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.60.2.1.5 |
| hwFatApLocationProfile Description. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.60.2.1.7 |
| hwFatApRadioRowStatus Description. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.6.139.11.1.60.2.1.8 |
| hwFatApMeshWhitelistProfile This object indicates the bound whitelist profile. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.60.2.1.9 |