hwAPWiredPortProfilePortEthTrunkID
HUAWEI-WLAN-CONFIGURATION-MIB ·
.1.3.6.1.4.1.2011.6.139.11.1.13.1.4
Object
column
r/w
Unsigned32
This object indicates the ID of a Trunk. 0 is valid and 0xFFFFFFFF is invalid. The default value is 0xFFFFFFFF.
Context
- MIB
- HUAWEI-WLAN-CONFIGURATION-MIB
- OID
.1.3.6.1.4.1.2011.6.139.11.1.13.1.4- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwAPWiredPortProfileEntry
- Table
- hwAPWiredPortProfileTable
- Siblings
- 41
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 0-0
range: 255-255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwAPWiredPortProfileName This object indicates the name of an AP wired port link profile. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.13.1.1 |
| hwAPWiredPortProfileUserIsolate This object indicates the status of the user isolation function. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.13.1.10 |
| hwAPWiredPortProfileDhcpTrust This object indicates whether a port is configured as a DHCP trusted port. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.13.1.11 |
| hwAPWiredPortProfileNdTrust This object indicates whether a port is configured as a ND trusted port. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.13.1.12 |
| hwAPWiredPortProfileRowStatus This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.6.139.11.1.13.1.13 |
| hwAPWiredPortProfileLearnAddress This object indicates whether to enable ipv4 address learning.The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.13.1.14 |
| hwAPWiredPortProfileIpBindCheck This object indicates whether to enable IP packet checking against the binding table.The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.13.1.15 |
| hwAPWiredPortProfileArpBindCheck This object indicates whether to enable ARP packet checking against the binding table.The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.13.1.16 |
| hwAPWiredPortProfileSTPAutoShutdown This object indicates whether to enable STP-triggered port shutdown.The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.13.1.17 |
| hwAPWiredPortProfileSTPAutoShutdownRecoveryTime This object indicates the automatic port recovery time after an STP-triggered shutdown.The default value is 600. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.13.1.18 |
| hwAPWiredPortProfileTrafficOptimizeSuppressionBc This object indicates the rate limit for broadcast storm suppression.The default value is 0xFFFFFFFF. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.13.1.19 |
| hwAPWiredPortPortLinkProfileName This object indicates the bound AP wired port link profile. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.13.1.2 |
| hwAPWiredPortProfileTrafficOptimizeSuppressionUc This object indicates the rate limit for unknown unicast storm suppression.The default value is 0xFFFFFFFF. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.13.1.20 |
| hwAPWiredPortProfileTrafficOptimizeSuppressionMc This object indicates the rate limit for multicast storm suppression.The default value is 0xFFFFFFFF. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.13.1.21 |
| hwAPWiredPortProfileIGMPSnooping This object indicates whether to enable IGMP-snooping.The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.13.1.22 |
| hwAPWiredPortProfileLearnIpv6Address This object indicates whether to enable ipv6 address learning.The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.13.1.23 |
| hwAPWiredPortProfileMLDSnooping This object indicates whether to enable MLD-snooping.The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.13.1.24 |
| hwAPWiredPortProfileTrafficOptimizeTcpAdjustMss Description. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.13.1.25 |
| hwAPWiredPortProfilePortSec This object indicates the status of the port security function. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.13.1.26 |
| hwAPWiredPortProfilePortSecMACMaxNum This object indicates the max number of the port security mac. The default value is 1. | column | Integer32 | .1.3.6.1.4.1.2011.6.139.11.1.13.1.27 |
| hwAPWiredPortProfilePortSecStickyMac This object indicates the status of the port security sticky mac function. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.13.1.28 |
| hwAPWiredPortProfilePortSecProtectAction This object indicates the protect action of the port security function. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.13.1.29 |
| hwAPWiredPortProfilePortDesc This object indicates the description of an interface. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.13.1.3 |
| hwAPWiredPortProfilePortForwardMode This object indicates whether to config port forward mode.The default value is direct forward. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.13.1.30 |
| hwAPWiredPortDot1xClientProfileName This object indicates the bound dot1x client profile. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.13.1.31 |
| hwAPWiredPortProfileMACLearningPriority This object indicates the mac learning priority of wired ports. The default value is 0. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.13.1.32 |
| hwAPWiredPortProfileMACLearningAction This object indicates the packet forwarding policy of wired ports during mac address learning. The default value is forward(1). | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.13.1.33 |
| hwAPWiredPortProfileOption82InsertSwitch This object indicates the status of the function of appending the option 82 field to DHCP messages from AP wired ports. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.13.1.34 |
| hwAPWiredPortProfileOption82InsertRidFormat This object indicates the format of remote-id(RID) in the Option 82 field to DHCP messages from AP wired ports. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.13.1.35 |
| hwAPWiredPortProfileOption82RidMacFormat This object indicates the AP MAC address format of remote-id(RID) in the Option 82 field to DHCP messages from AP wired ports. The default value is 0. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.13.1.36 |
| hwAPWiredPortProfileOption82RidUserDefined This object indicates the user-defined format of remote-id(RID) in the Option 82 field to DHCP messages from AP wired ports. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.13.1.37 |
| hwAPWiredPortProfileOption82RidPattern This object indicates the pattern of remote-id(RID) in the Option 82 field to DHCP messages from AP wired ports. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.13.1.38 |
| hwAPWiredPortProfileOption82InsertCidFormat This object indicates the format of circuit-id(CID) in the Option 82 field to DHCP messages from AP wired ports. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.13.1.39 |
| hwAPWiredPortProfileOption82CidMacFormat This object indicates the AP MAC address format of circuit-id(CID) in the Option 82 field to DHCP messages from AP wired ports. The default value is 0. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.13.1.40 |
| hwAPWiredPortProfileOption82CidUserDefined This object indicates the user-defined format of circuit-id(CID) in the Option 82 field to DHCP messages from AP wired ports. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.13.1.41 |
| hwAPWiredPortProfileOption82CidPattern This object indicates the pattern of circuit-id(CID) in the Option 82 field to DHCP messages from AP wired ports. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.13.1.42 |
| hwAPWiredPortProfilePortSTPSwitch This object indicates whether to enable STP on wired ports. The default value is 3. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.13.1.5 |
| hwAPWiredPortProfilePortMode This object indicates the mode of the wired port. the default value is 256. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.13.1.6 |
| hwAPWiredPortProfilePortVlanPvid This object indicates the PVID of a port. The default value is 1. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.13.1.7 |
| hwAPWiredPortProfilePortVlanTagged This object indicates whether to tag ports with VLAN IDs. The default value is 0. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.13.1.8 |
| hwAPWiredPortProfilePortVlanUntagged This object indicates whether to untag VLAN IDS from ports. The default value is 1. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.13.1.9 |