hwAPTrafficProfileOptimizeBcMcDenyAllExceptMDNS
HUAWEI-WLAN-CONFIGURATION-MIB ·
.1.3.6.1.4.1.2011.6.139.11.1.23.1.39
Object
column
r/w
Enumeration
This object indicates whether to allow mDNS packets to pass through when the device is configured to discard multicast and broadcast packets. This configuration is valid only when denyAll is set to enable. The default value is 2.
Context
- MIB
- HUAWEI-WLAN-CONFIGURATION-MIB
- OID
.1.3.6.1.4.1.2011.6.139.11.1.23.1.39- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwAPTrafficProfileEntry
- Table
- hwAPTrafficProfileTable
- Siblings
- 38
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | disable |
2 | enable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwAPTrafficProfileName This object indicates the name of a traffic profile. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.23.1.1 |
| hwAPTrafficProfileMldSnooping This object indicates the status of the MLD snooping function. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.23.1.10 |
| hwAPTrafficProfileIGMPSnooping This object indicates the status of the IGMP snooping function. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.23.1.11 |
| hwAPTrafficProfileIGMPSnoopingReportSuppress This object indicates the status of the IGMP snooping report suppression function. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.23.1.12 |
| hwAPTrafficProfileMcToUc This object indicates the status of the function of converting multicast to unicast. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.23.1.13 |
| hwAPTrafficProfileOptimizeSuppressionBc This object indicates the information about broadcast storm suppression. The unit is pps. The default value is 0xFFFFFFFF, indicating that the broadcast storm suppression is not e… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.23.1.14 |
| hwAPTrafficProfileOptimizeSuppressionUc This object indicates the information about unknown unicast storm suppression. The unit is pps. The default value is 0xFFFFFFFF, indicating that the broadcast storm suppression is… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.23.1.15 |
| hwAPTrafficProfileOptimizeSuppressionMc This object indicates the information about multicast storm suppression. The unit is pps. The default value is 0xFFFFFFFF, indicating that the broadcast storm suppression is not e… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.23.1.16 |
| hwAPTrafficProfileOptimizeTCPAdjustMSS This object indicates the information about the automatic MSS adjustment. The default value is 0xFFFFFFFF, indicating that this function is not enabled. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.23.1.17 |
| hwAPTrafficProfileOptimizeProxyARP This object indicates the status of the ARP proxy function. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.23.1.18 |
| hwAPTrafficProfileOptimizeProxyND This object indicates the status of the ND proxy function. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.23.1.19 |
| hwAPTrafficProfilePriorityMapDnTrustMode This object indicates the downstream service priority mapping mode. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.23.1.2 |
| hwAPTrafficProfileOptimizeUcSendARP This object indicates the status of the unicast ARP function. The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.23.1.20 |
| hwAPTrafficProfileOptimizeUcSendND This object indicates the status of the unicast ND function. The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.23.1.21 |
| hwAPTrafficProfileOptimizeUcSendDHCP This object indicates the status of the unicast DHCP function. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.23.1.22 |
| hwAPTrafficProfileOptimizeBcMcDenyAll After this function is enabled, other multicast packets, except for proxy response packets and multicast packets converted to unicast packets, are discarded. The default value is … | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.23.1.23 |
| hwAPTrafficProfileOptimizeStaBridgeForward This object indicates the status of the STA bridge forwarding function. The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.23.1.24 |
| hwAPTrafficProfileRowStatus This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.6.139.11.1.23.1.25 |
| hwAPTrafficProfilePriorityMapUpTrustMode This object indicates the tunnel priority mapping mode. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.23.1.26 |
| hwAPTrafficProfilePriorityDscpUpMapDscp This object indicates the mapping relationship between DSCP and DSCP. DSCP values range from 0 to 63. Two mapped data are separated by a comma. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.23.1.27 |
| hwAPTrafficProfileOptimizeBcMcMismatchAct This object indicates the status of the bcmc unicast send mismacth action function. The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.23.1.28 |
| hwAPTrafficProfileMcToUcDynamicAdatptive This object indicates the status of the multicast to unicast dynamic adaptive function. The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.23.1.29 |
| hwAPTrafficProfilePriorityDscpDnMap80211e This object indicates the mapping relationship between 802.1p priorities of 802.3 packets and user priorities of 802.11 packets when data packets are sent to a downstream AP. DSCP… | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.23.1.3 |
| hwAPTrafficProfileIGMPSnoopingMaxBandwidth This object indicates the status of the IGMP snooping max bandwidth function. The invalid value is 0. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.23.1.30 |
| hwAPTrafficProfileIGMPSnoopingMaxUser This object indicates the status of the IGMP snooping max user function. The invalid value is 0. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.23.1.31 |
| hwAPTrafficProfilePriorityDscpUpMap8021p This object indicates the mapping relationship between DSCP and 802.1p. DSCP values range from 0 to 63. Two mapped data are separated by a comma. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.23.1.32 |
| hwAPTrafficProfilePriority80211eUpMap8021p This object indicates the mapping relationship between 802.11e and 802.1p. 802.11e values range from 0 to 7. Two mapped data are separated by a comma. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.23.1.33 |
| hwAPTrafficProfilePriority8021pDnMap80211e This object indicates the mapping relationship between 802.11e and 802.1p. 802.11e values range from 0 to 7. Two mapped data are separated by a comma. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.23.1.34 |
| hwAPTrafficProfilePriorityMapUpPayloadTrustMode This object indicates the status of priority-map upstream trust. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.23.1.35 |
| hwAPTrafficProfileSvpVoice This object indicates the status of the SVP voice function. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.23.1.36 |
| hwAPTrafficProfileRateLimitClientDynamic This object indicates the rate limit switch of client. The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.23.1.37 |
| hwAPTrafficProfileRateLimitClientDynamicThr This object indicates the limit rate of client. Can only be configed with 8,16,32. The default value is 16. It is expressed in Mbps. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.23.1.38 |
| hwAPTrafficProfilePriority80211eUpMapDscp This object indicates the tunnel priority mappings when data packets are sent from APs to an AC. DSCP values range from 0 to 63 and 802.11e priorities range from 0 to 7. Two mappe… | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.23.1.4 |
| hwAPTrafficProfileUserIsolate This object indicates the user isolation mode. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.23.1.5 |
| hwAPTrafficProfileRateLimitClientUp This object indicates the STA's uplink rate limit. The default value is 0xFFFFFFFF. It is expressed in kbit/s. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.23.1.6 |
| hwAPTrafficProfileRateLimitClientDn This object indicates the STA's downlink rate limit. The default value is 0xFFFFFFFF. It is expressed in kbit/s. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.23.1.7 |
| hwAPTrafficProfileRateLimitVapUp This object indicates the VAP's uplink rate limit. The default value is 0xFFFFFFFF. It is expressed in kbit/s. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.23.1.8 |
| hwAPTrafficProfileRateLimitVapDn This object indicates the VAP's downlink rate limit. The default value is 0xFFFFFFFF. It is expressed in kbit/s. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.23.1.9 |