hw2gRadioApEDCABEAckPolicy
HUAWEI-WLAN-CONFIGURATION-MIB ·
.1.3.6.1.4.1.2011.6.139.11.1.16.1.33
Object
column
r/w
Enumeration
This object indicates the EDCA parameter AckPolicy for BE services on APs. The default value is 1.
Context
- MIB
- HUAWEI-WLAN-CONFIGURATION-MIB
- OID
.1.3.6.1.4.1.2011.6.139.11.1.16.1.33- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hw2gRadioProfileEntry
- Table
- hw2gRadioProfileTable
- Siblings
- 67
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | normal |
2 | noAck |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hw2gRadioProfileName This object indicates the name of a 2G radio profile. It is the index of the table. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.16.1.1 |
| hw2gRadioGuardIntervalMode This object indicates the GI mode. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.16.1.10 |
| hw2gRadioShortPreamble This object indicates the preamble mode. The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.16.1.11 |
| hw2gRadioFragmentationThreshold This object indicates the packet fragmentation threshold. The default value is 2346. It is expressed in bytes. | column | Integer32 | .1.3.6.1.4.1.2011.6.139.11.1.16.1.12 |
| hw2gRadioHtAmpduSwitch This object indicates the status of the aggregation function. The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.16.1.13 |
| hw2gRadioHtAmpduMaxLengthExponent This object indicates the maximum length of frames converged by an MPDU. The default value is 3 ? 0: 8191 bytes ? 1: 16383 bytes ? 2: 32767 bytes ? 3: 65535 bytes. | column | Integer32 | .1.3.6.1.4.1.2011.6.139.11.1.16.1.14 |
| hw2gRadioDot11bgBasicRate This object indicates the basic rate set of the 802.11bg protocol. The default value is 3 ? bit0: 1 Mbit/s ? bit1: 2 Mbit/s ? bit2: 5.5 Mbit/s ? bit3: 6 Mbit/s ? bit4: 9 Mbit/s ? … | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.16.1.15 |
| hw2gRadioDot11bgSupportRate This object indicates the supported rate set of the 802.11bg protocol. The default value is 0xFFF ? bit0: 1 Mbit/s? bit1: 2 Mbit/s? bit2: 5.5 Mbit/s? bit3: 6 Mbit/s? bit4: 9 Mbit/… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.16.1.16 |
| hw2gRadioMulticastRate This object indicates the multicast rate. The default value is 0x2F ? bit0: 1 Mbit/s ? bit1: 2 Mbit/s ? bit2: 5.5 Mbit/s ? bit3: 6 Mbit/s ? bit4: 9 Mbit/s ? bit5: 11 Mbit/s ? bit6… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.16.1.17 |
| hw2gRadioWmmMandatorySwitch This object indicates the status of the mandatory WMM matching function. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.16.1.18 |
| hw2gRadioApEDCAVoiceECWmax This object indicates the EDCA parameter ECWmax, namely, exponent form of Cwmax, for voice services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin).… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.16.1.19 |
| hw2gRadioApEDCAVoiceECWmin This object indicates the EDCA parameter ECWmin, namely, exponent form of Cwmin, for voice services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin).… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.16.1.20 |
| hw2gRadioApEDCAVoiceAIFSN This object indicates the EDCA parameter AIFSN, namely, arbitration interframe spacing number, for voice services on APs. The default value is 1. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.16.1.21 |
| hw2gRadioApEDCAVoiceTXOPLimit This object indicates the EDCA parameter TXOPLimit, namely, transmission opportunity limit, for voice services on APs. The default value is 47. The unit is 32 us. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.16.1.22 |
| hw2gRadioApEDCAVoiceAckPolicy This object indicates the EDCA parameter AckPolicy for voice services on APs. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.16.1.23 |
| hw2gRadioApEDCAVideoECWmax This object indicates the EDCA parameter ECWmax, namely, exponent form of Cwmax, for video services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin).… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.16.1.24 |
| hw2gRadioApEDCAVideoECWmin This object indicates the EDCA parameter ECWmin, namely, exponent form of Cwmin, for video services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin).… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.16.1.25 |
| hw2gRadioApEDCAVideoAIFSN This object indicates the EDCA parameter AIFSN, namely, arbitration interframe spacing number, for video services on APs. The default value is 1. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.16.1.26 |
| hw2gRadioApEDCAVideoTXOPLimit This object indicates the EDCA parameter TXOPLimit, namely, transmission opportunity limit, for video services on APs. The default value is 94. The unit is 32 us. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.16.1.27 |
| hw2gRadioApEDCAVideoAckPolicy This object indicates the EDCA parameter AckPolicy for video services on APs. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.16.1.28 |
| hw2gRadioApEDCABEECWmax This object indicates the EDCA parameter ECWmax, namely, exponent form of Cwmax, for BE services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). Th… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.16.1.29 |
| hw2gRadioApEDCABEECWmin This object indicates the EDCA parameter ECWmin, namely, exponent form of Cwmin, for BE services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). Th… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.16.1.30 |
| hw2gRadioApEDCABEAIFSN This object indicates the EDCA parameter AIFSN, namely, arbitration interframe spacing number, for BE services on APs. The default value is 3. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.16.1.31 |
| hw2gRadioApEDCABETXOPLimit This object indicates the EDCA parameter TXOPLimit for BE services on APs. It indicates the transmission opportunity limit. The default value is 0. The unit is 32 us. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.16.1.32 |
| hw2gRadioApEDCABKECWmax This object indicates the EDCA parameter ECWmax, namely, exponent form of Cwmax, for BK services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). Th… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.16.1.34 |
| hw2gRadioApEDCABKECWmin This object indicates the EDCA parameter ECWmin, namely, exponent form of Cwmin, for BK services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). Th… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.16.1.35 |
| hw2gRadioApEDCABKAIFSN This object indicates the EDCA parameter AIFSN, namely, arbitration interframe spacing number, for BK services on APs. The default value is 7. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.16.1.36 |
| hw2gRadioApEDCABKTXOPLimit This object indicates the EDCA parameter TXOPLimit, namely, transmission opportunity limit, for BK services on APs. The default value is 0. The unit is 32 us. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.16.1.37 |
| hw2gRadioApEDCABKAckPolicy This object indicates the EDCA parameter AckPolicy for BK services on APs. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.16.1.38 |
| hw2gRadioWmmSwitch This object indicates the status of the WMM function. The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.16.1.39 |
| hw2gRadioRtsCtsThreshold This object indicates the request To Send/Clear To Send (RTS/CTS) threshold. If the length of a frame to be sent by the MAC Layer exceeds this threshold, an RTS frame needs to be … | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.16.1.40 |
| hw2gRadioRtsCtsMode This object indicates the RTS-CTS mode set for the specified radio profile. The default value is 3(from V2R8C10; The default value is 2 before V2R8C10.). | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.16.1.41 |
| hw2gRadioPowerAutoAdjustSwitch This object indicates the status of the user-by-user power control function. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.16.1.42 |
| hw2gRadioBeamformingSwitch This object indicates the status of the beamforming function. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.16.1.43 |
| hw2gRadioWifiLight This object indicates information reflected by the blinking frequency of the Wireless LED on an AP. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.16.1.44 |
| hw2gRadioChannelSwitchAnnouncementSwitch This object indicates the status of the channel switchover announcement function. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.16.1.45 |
| hw2gRadioChannelSwitchMode This object indicates the channel switch announcement mode. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.16.1.46 |
| hw2gRadioAutoOffServiceSwitch This object indicates the status of the scheduled radio disabling function. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.16.1.47 |
| hw2gRadioAutoOffServiceStartTime This object indicates the start time for disabling the radio. The value is in the format of hh:mm:ss NOTE ? hh specifies the hour. The value is an integer that ranges from 0 to 23… | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.16.1.48 |
| hw2gRadioAutoOffServiceEndTime This object indicates the end time for disabling of the radio. The value is in the format of hh:mm:ss NOTE ? hh specifies the hour. The value is an integer that ranges from 0 to 2… | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.16.1.49 |
| hw2gRadioInterferenceDetectSwitch This object indicates the status of the user-by-user power control function. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.16.1.50 |
| hw2gRadioInterferenceIntraFrequencyThreshold This object indicates the alarm threshold for co-channel interference, namely, the percentage of the co-channel interference power against the maximum power. The default value is … | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.16.1.51 |
| hw2gRadioInterferenceAdjacentFrequencyThreshold This object indicates the alarm threshold for adjacent-channel interference, namely, the percentage of the adjacent-channel interference power against the maximum power. The defau… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.16.1.52 |
| hw2gRadioInterferenceStationThreshold This object indicates the alarm threshold for station interference. When the number of the STAs detected exceeds the specified alarm threshold, the AP reports alarms to the AC.The… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.16.1.53 |
| hw2gRadioRrmProfile This object indicates the bound RRM profile. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.16.1.54 |
| hw2gRadioAirScanProfile This object indicates the bound air scan profile. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.16.1.55 |
| hw2gRadioProfileRowStatus This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used ? ROWSTATUS_UNDEFINED: undefined? ROWSTATUS_ACTIVE: active? ROW… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.6.139.11.1.16.1.56 |
| hw2gRadioProfileUtmostPowerSwitch This object indicates the switch for the function of sending packets at maximum power, the default value is 2(auto). | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.16.1.57 |
| hw2gRadioProfileRadioType This object indicates the type of radio. The default value is 17. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.16.1.59 |
| hw2gRadioBeaconInterval This object indicates a Beacon interval. The default value is 100. It is expressed in ms. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.16.1.6 |
| hw2gRadioProfileSmartAntennaEnable This object indicates the status of the smart antenna switch. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.16.1.60 |
| hw2gRadioProfileTxChainNum This object indicates the number of the TX chain. The default value is 4. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.16.1.61 |
| hw2gRadioProfileRxChainNum This object indicates the number of the RX chain. The default value is 4. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.16.1.62 |
| hw2gRadioProfileAutoOffTimeRange This object indicates the time range for disabling the radio. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.16.1.63 |
| hw2gRadioAgileAntennaPolarSwitch This object indicates the status of the agile antenna polarization. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.16.1.64 |
| hw2gRadioProfileCCAThreshold This object indicates the value of the CCA threshold. The default value is 0. | column | Integer32 | .1.3.6.1.4.1.2011.6.139.11.1.16.1.65 |
| hw2gRadioProfileSmartAntennaLowPerThreshold This object indicates the value of the smart antenna low per threshold. The default value is 20. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.16.1.66 |
| hw2gRadioProfileSmartAntennaHighPerThreshold This object indicates the value of the smart antenna high per threshold. The default value is 80. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.16.1.67 |
| hw2gRadioProfileSmartAntennaTrainingInterval This object indicates the value of the smart antenna training interval. The default value is 0. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.16.1.68 |
| hw2gRadioProfileSmartAntennaTrainingMPDUNum This object indicates the value of the smart antenna training MPDU number. The default value is 640. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.16.1.69 |
| hw2gRadioProfileSmartAntThruputTrainThreshold This object indicates the value of the smart antenna throughput trigger training threshold. The default value is 10. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.16.1.70 |
| hw2gRadioDot11axGuardIntervalMode This object indicates the dot11ax GI mode. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.16.1.71 |
| hw2gRadioHighwayBssid This object indicates the highway bssid. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.2011.6.139.11.1.16.1.72 |
| hw2gRadioAutonavigationBeaconInterval This object indicates a autonavigation beacon interval. The default value is 60. It is expressed in ms. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.16.1.73 |
| hwRadio2GProfileAmsduSwitch This object indicates the status of a-msdu switch. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.16.1.74 |
| hw2gRadioVipUserBandwidthReservationRatio This object indicates the proportion of reserved bandwidth for VIP users. The default value is 20. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.16.1.75 |
| hw2GRadioRu26ToleranceSwitch This object indicates the status of ru26-tolerance switch. The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.16.1.76 |