hwApSipfpmFlowOverloadRestoreTrap
HUAWEI-WLAN-AP-MIB ·
.1.3.6.1.4.1.2011.6.139.13.1.1.146
Object
notification
Cleared the alarm of high iPCA flow usage on the AP.
Context
- MIB
- HUAWEI-WLAN-AP-MIB
- OID
.1.3.6.1.4.1.2011.6.139.13.1.1.146- Type
- notification
- Status
- current
- Parent
- hwWlanApTrap
- Siblings
- 150
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwApFaultTrap The object indicates an AP communication fault alarm. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.1 |
| hwApMemoryOverloadRestoreTrap This object indicates that the memory usage of an AP restores to the allowed range. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.10 |
| hwApSoftGreDownTrap This alarm is generated when the softgre tunnel down. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.100 |
| hwApSoftGreDownTrapRestore This alarm is generated when the softgre tunnel up. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.101 |
| hwApVersionNotRecommendedTrap The AP version is not recommended for the current AC. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.102 |
| hwApVersionNotRecommendedTrapRestore AP-version-not-recommended alarm restore | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.103 |
| hwApDiskOverloadTrap The Disk usage of an AP exceeds the upper threshold. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.104 |
| hwApDiskOverloadRestoreTrap The Disk usage of an AP restores to the allowed range. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.105 |
| hwApPowerLimitedTrap This alarm is generated when the AP works in Limited mode due to insufficient power supply. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.106 |
| hwApPowerLimitedResumeTrap This alarm is generated when the AP resumes from the Limited mode. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.107 |
| hwAPIPConflictTrap The IP address of the AP conflicts with that of the gateway or another AP. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.108 |
| hwApNumReachMaxTrap This alarm is generated when the number of online APs reaches the maximum specifications. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.109 |
| hwApStaFullTrap This object indicates that new STAs cannot associate with an AP. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.11 |
| hwApNumReachMaxResumeTrap This alarm is generated when the number of online APs is less than the maximum specifications. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.110 |
| hwApNumReachWarningTrap The number of online APs reaches 80% of the maximum specifications. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.111 |
| hwApNumReachWarningResumeTrap The number of online APs is less than 80% of the maximum specifications. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.112 |
| hwAPIotCardConnectServerTrap This alarm is generated when an IOT card of the AP is connected to the server. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.113 |
| hwAPIotCardDisconnectServerTrap This alarm is generated when an IOT card of the AP is disconnected from the server. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.114 |
| hwAPIotCardTypeMatchTrap This alarm is generated when an IOT card of the AP is match with configuration. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.115 |
| hwAPIotCardTypeMismatchTrap This alarm is generated when an IOT card of the AP is mismatch with configuration. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.116 |
| hwAPFanRemoveTrap This alarm is generated when the fan of the AP is removed. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.117 |
| hwAPFanInsertTrap This alarm is generated when the fan of the AP is inserted. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.118 |
| hwAPPowerRemoveTrap This alarm is generated when the power of the AP is removed. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.119 |
| hwApStaFullRecoverTrap This object indicates that new STAs can associate with an AP. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.12 |
| hwAPPowerInsertTrap This alarm is generated when the power of the AP is inserted. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.120 |
| hwAPPowerFailTrap This alarm is generated when the power of the AP is faulty. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.121 |
| hwAPPowerFailResumeTrap This alarm is generated when the power of the AP resume from failure. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.122 |
| hwAPPowerInvalidTrap This alarm is generated when the AP power is invalid for some reason. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.123 |
| hwAPPowerInvalidResumeTrap This alarm is generated when the AP power resume from invalid situation. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.124 |
| hwApExistNeedReconnectTrap This alarm is generated when some APs need to be reconnected. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.125 |
| hwApExistNeedReconnectResumeTrap This alarm is generated when no AP needs to be reconnected. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.126 |
| hwApOpticalVoltageTooHighTrap This object indicates that the Voltage of an AP's optical module is too High. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.127 |
| hwApOpticalVoltageTooHighRestoreTrap This object indicates that the Voltage of an AP's optical module restores to the normal range. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.128 |
| hwApOpticalVoltageTooLowTrap This object indicates that the Voltage of an AP's optical module is too low. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.129 |
| hwAcDevicesSwitchTrap This object that an active/standby AC switchover occurs. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.13 |
| hwApOpticalVoltageTooLowRestoreTrap This object indicates that the Voltage of an AP's optical module restores to the normal range. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.130 |
| hwApOpticalCurrentTooHighTrap This object indicates that the Current of an AP's optical module is too high. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.131 |
| hwApOpticalCurrentTooHighRestoreTrap This object indicates that the Current of an AP's optical module restores to the normal range. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.132 |
| hwApOpticalCurrentTooLowTrap This object indicates that Current of an AP's optical module is too low. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.133 |
| hwApOpticalCurrentTooLowRestoreTrap This object indicates that the Current of an AP's optical module restores to the normal range. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.134 |
| hwApLoopbackDetectTrap This object indicates that the wired port detected a loop and blocked itself. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.135 |
| hwApLoopbackDetectRestoreTrap This object indicates that the blocked port has recovered. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.136 |
| hwApServiceInterruptAlertTrap This alarm will be generated when the AP service is unavailable after a period of time. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.137 |
| hwApServiceInterruptAlertResumeTrap This alarm will be generated when the AP service is available. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.138 |
| hwApRTUDemoLicenseExpireTrap This alarm will be generated when the AP RTU license is near deadline. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.139 |
| hwDyingGaspTrap This object indicates a dying gasp alarm. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.14 |
| hwApTypeInfoInconsistentTrap This alarm is generated when APs of the same type report different AP type attributes. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.140 |
| hwApCPETunnelSpecFullTrap This alarm is generated when reached the maximum number of CPE tunnels on the AP. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.141 |
| hwApCPETunnelSpecFullRestoreTrap This alarm is generated when the number of CPE tunnels on the AP falls below the maximum value. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.142 |
| hwApEMDISessionOverloadTrap This alarm is generated when the eMDI session usage on the AP is high. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.143 |
| hwApEMDISessionOverloadRestoreTrap Cleared the alarm of high eMDI session usage on the AP. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.144 |
| hwApSipfpmFlowOverloadTrap This alarm is generated when the iPCA flow usage on the AP is high. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.145 |
| hwApSACSessionOverloadTrap This alarm is generated when the SAC session usage on the AP is high. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.147 |
| hwApSACSessionOverloadRestoreTrap Cleared the alarm of high SAC session usage on the AP. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.148 |
| hwWlanApPKICACertNearlyExpiredTrap This alarm is generated when the CA certificate is nearly expired. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.149 |
| hwApFaultTrapFat Description. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.15 |
| hwWlanApPKILocalCertNearlyExpiredTrap This alarm is generated when the Local certificate is nearly expired. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.150 |
| hwApPortRateAutoNegotiationEventTrap This object indicates the auto-negotiation rate of the AP port changes. . | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.151 |
| hwApNormalTrapFat Description. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.16 |
| hwApTemperatureTooLowTrap This object indicates that the temperature is too low. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.17 |
| hwApTemperatureTooLowRestoreTrap This object indicates that the temperature restores to the normal range. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.18 |
| hwApTemperatureTooHighTrap This object indicates that the temperature is too high. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.19 |
| hwApNormalTrap This object indicates an AP communication fault clear alarm. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.2 |
| hwApTemperatureTooHighRestoreTrap This object indicates that the temperature restores to the normal range. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.20 |
| hwApOpticalRxPowerTooHighTrap This object indicates that the receive power of an AP's optical module is too high. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.21 |
| hwApOpticalRxPowerTooHighRestoreTrap This object indicates that the receive power of an AP's optical module restores to the normal range. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.22 |
| hwApOpticalRxPowerTooLowTrap This object indicates that the receive power of an AP's optical module is too low. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.23 |
| hwApOpticalRxPowerTooLowRestoreTrap This object indicates that the receive power of an AP's optical module restores to the normal range. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.24 |
| hwApOpticalTemperatureTooHighTrap This object indicates that the temperature of an AP's optical module is too high. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.25 |
| hwApOpticalTemperatureTooHighRestoreTrap This object indicates that the temperature of an AP's optical module restores to the normal range. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.26 |
| hwApOpticalTemperatureTooLowTrap This object indicates that the temperature of an AP's optical module is too low. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.27 |
| hwApOpticalTemperatureTooLowRestoreTrap This object indicates that the temperature of an AP's optical module restores to the normal range. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.28 |
| hwApNotSupportCountryCodeTrap This object indicates that the country code is not supported. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.29 |
| hwApPingResultTrap This object indicates an AP ping result alarm. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.3 |
| hwApColdBootTrap This object indicates a cold restart alarm. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.30 |
| hwApColdBootRestoreTrap This object indicates a cold restart clear alarm. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.31 |
| hwApHotBootTrap This object indicates a hot restart alarm. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.32 |
| hwApHotBootRestoreTrap This object indicates a hot restart clear alarm. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.33 |
| hwApCRCTooHighTrap This object indicates a CRC error alarm. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.34 |
| hwApCRCTooHighRestoreTrap This object indicates that CRC error alarms are cleared. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.35 |
| hwApConflictApNameTrap This object indicates an alarm of AP name conflict. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.36 |
| hwApLicenseTrap This object indicates an AP license resource exhaustion alarm. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.37 |
| hwApFmeaIICFaultTrap This object indicates an FMEA IIC fault alarm. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.38 |
| hwApFmeaIICFaultRestoreTrap This object indicates that the FMEA IIC fault alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.39 |
| hwApConfigCommitTrap This object indicates that the configuration of an AP is successfully committed. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.4 |
| hwApFmeaPHYFaultTrap This object indicates an FMEA PHY fault alarm. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.40 |
| hwApFmeaPHYFaultRestoreTrap This object indicates that the FMEA PHY fault alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.41 |
| hwApFmeaFaultTrap This object indicates an FMEA fault alarm. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.42 |
| hwApFmeaFaultRestoreTrap This object indicates that the FMEA fault alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.43 |
| hwApOpticalInsertTrap This object indicates an alarm that is generated when an optical module is installed. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.44 |
| hwApOpticalRemoveTrap This object indicates an alarm generated due to installation of an optical module is cleared. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.45 |
| hwApReceivedInvalidArpNewTrap This object indicates that invalid ARP packets are received. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.46 |
| hwApVersionMismatchTrap This object indicates that the AP version and the AC version do not match. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.47 |
| hwRadioUploadRemoteCaptureFileTrap This object indicates the alarm on the remote capture result upload result. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.48 |
| hwMPJoinedOnEthernetTrap This object indicates the alarm when an MP goes online through an Ethernet interface. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.49 |
| hwUnAuthorizedApRecordExistTrap This object indicates that unauthorized AP alarms exist. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.5 |
| hwMPJoinedOnEthernetRestoreTrap This object indicates the alarm when an MP that went online through an Ethernet interface goes online through an air interface. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.50 |
| hwMPPJoinedOnAirTrap This object indicates the alarm when an MPP changes to an MP and goes online through an air interface. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.51 |
| hwMPPJoinedOnAirRestoreTrap This object indicates the alarm when an MPP that went online through an air interface goes online through an Ethernet interface. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.52 |
| hwApOpticalTxPowerTooHighTrap This object indicates an alarm for high transmit power of the AP's optical module. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.53 |
| hwApOpticalTxPowerTooHighRestoreTrap This object indicates a clear alarm for transmit power recovery of the AP's optical module. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.54 |
| hwApOpticalTxPowerTooLowTrap This object indicates an alarm for low transmit power of the AP's optical module. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.55 |
| hwApOpticalTxPowerTooLowRestoreTrap This object indicates a clear alarm for transmit power recovery of the AP's optical module. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.56 |
| hwApOnLineNumExceedCardSpecTrap This object indicates the number of online APs on the card has exceeded the maximum value. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.57 |
| hwApFanInvalidTrap This object indicates a complete failure of a fan. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.58 |
| hwApFanInvalidRestoreTrap This object indicates that the complete failure of a fan has been rectified. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.59 |
| hwUnAuthorizedApRecordClearTrap This object indicates that unauthorized AP alarms are cleared. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.6 |
| hwApStorageDevRemoveTrap This object indicates that the storage card is removed. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.60 |
| hwApStorageDevInsertTrap This object indicates that the storage card is installed. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.61 |
| hwApPoePowerOffTrap This object indicates that a port is powered off. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.62 |
| hwApPoePowerOnTrap This object indicates that a port is powered on. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.63 |
| hwApPoePdConnectedTrap This object indicates that a port detects a PD connected to it. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.64 |
| hwApPoePdDisconnectedTrap This object indicates that a port detects disconnection of the attached PD. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.65 |
| hwApPoePdClassOvercurrentTrap This object indicates that a port detects a PD whose current exceeds the threshold of the corresponding class. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.66 |
| hwApPoePdPriorityDifferentTrap This object indicates that the priority configured on a port is different from the PD priority. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.67 |
| hwApPoePowerOverUtilizationThresholdTrap This object indicates that the load power of a PoE slot exceeds the upper limit. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.68 |
| hwApPoePowerOverUtilizationThresholdRestoreTrap This object indicates that the load power of a PoE slot has fallen below the upper limit. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.69 |
| hwApCpuOverloadTrap This object indicates that the CPU usage of an AP exceeds the upper threshold. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.7 |
| hwApSTPAutoShutdownTrap This object indicates that STP detected a loop and shut down the port based on configuration. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.70 |
| hwApSTPAutoShutdownRestoreTrap This object indicates that the shutdown port has recovered. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.71 |
| hwApOpticalInvalidTrap This object indicates that the optical transceiver does not work normally. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.72 |
| hwApOpticalInvalidRestoreTrap This object indicates that the optical transceiver has restored. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.73 |
| hwApVapStaFullTrap This object indicates that new STAs cannot associate with an VAP. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.74 |
| hwVapStaFullRecoverTrap This object indicates that new STAs can associate with an VAP. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.75 |
| hwWlanBLELowPowerTrap This object indicates that the battery power of a BLE device is lower than the specified low power alarm threshold. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.76 |
| hwWlanBLELowPowerRestoreTrap This object indicates that the low power alarm of a BLE device has been cleared. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.77 |
| hwWlanBLEOfflineTrap This object indicates that a BLE device gets offline. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.78 |
| hwWlanBLEOfflineRestoreTrap This object indicates that an offline alarm of a BLE device has been cleared. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.79 |
| hwApCpuOverloadRestoreTrap This object indicates that an AP's CPU usage restores to the allowed range. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.8 |
| hwWlanBLEFaultyTrap This object indicates that an AP's built-in Bluetooth module is faulty. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.80 |
| hwWlanBLEFaultyRestoreTrap This object indicates that the fault on an AP's built-in Bluetooth module fault alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.81 |
| hwAPIoTCardInsertTrap This object indicates that an IoT card is inserted. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.82 |
| hwAPIoTCardRemoveTrap This object indicates that an IoT card is removed. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.83 |
| hwAPIoTServerStartFailTrap This object indicates that the server module on an AP for receiving data from the IoT card fails to start. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.84 |
| hwAPIoTServerStartFailResumeTrap This object indicates that the server used by the IoT card is successfully recovered. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.85 |
| hwWlanApSubFirmwareMismatchTrap This object indicates the mismatch alarm for the sub-firmware version on the AP. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.86 |
| hwApSpecificConfigChangedTrap Description. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.87 |
| hwApConfigInconsistWithActualTrap This alarm is generated when a the AP config is inconsistent with the actual attribute. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.88 |
| hwWlanBLEDetachedTrap This object indicates an alarm showing that a Bluetooth tag is detached. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.89 |
| hwApMemoryOverloadTrap This object indicates that the memory usage of an AP exceeds the upper threshold. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.9 |
| hwWlanBLEDetachedRestoreTrap This object indicates an alarm showing that a Bluetooth tag is re-attached. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.90 |
| hwWlanCableSnrNormalTrap This alarm is generated when the AP's current network cable quality is good. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.91 |
| hwWlanCableSnrAbnormalTrap This alarm is generated when the AP's current network cable quality is poor, causing packet loss risks. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.92 |
| hwWlanCableSnrDetectNotSupportTrap This alarm is generated when the AP's port is Down, resulting in a failure to detect the network cable quality. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.93 |
| hwApPowerInsufficientTrap This alarm is generated when the AP power supply is insufficient. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.94 |
| hwApPowerInsufficientResumeTrap This alarm is generated when the AP power supply insufficient resume. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.95 |
| hwPortVlanSecureMacTrap This alarm is generated when the AP's port receive illegal MAC. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.96 |
| hwApMcBcPktNumExceedTrap This alarm is generated when the AP broadcast and multicast packets over threshold. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.97 |
| hwApMcBcPktNumExceedRestoreTrap This alarm is generated when the AP broadcast and multicast packets over threshold restore. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.98 |
| hwApTypeMismatchTrap This object indicates that the AP version and the AC version do not match. | notification | - | .1.3.6.1.4.1.2011.6.139.13.1.1.99 |
Notification Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwWlanApMac This object indicates the MAC address of an AP. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.2011.6.139.13.3.3.1.1 |
| hwWlanApName This object indicates the AP name. | column | OctetString | .1.3.6.1.4.1.2011.6.139.13.3.3.1.4 |
| hwWlanApId Ap ID. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.6.139.13.3.3.1.67 |
| hwCurSipfpmFlowRate This object indicates the current iPCA flow rate on th AP. | scalar | OctetString | .1.3.6.1.4.1.2011.6.139.13.1.2.85 |
| hwUpperSipfpmFlowThreshold This object indicates the upper iPCA flow threshold on th AP. | scalar | OctetString | .1.3.6.1.4.1.2011.6.139.13.1.2.86 |
| hwLowerSipfpmFlowThreshold This object indicates the lower iPCA flow threshold on th AP. | scalar | OctetString | .1.3.6.1.4.1.2011.6.139.13.1.2.87 |