hwVplsLearnStyle
HUAWEI-VPLS-EXT-MIB ·
.1.3.6.1.4.1.2011.5.25.119.1.1.1.1.10
Object
column
r/w
Enumeration
This object indicates the style of learning the MAC address.
Context
- MIB
- HUAWEI-VPLS-EXT-MIB
- OID
.1.3.6.1.4.1.2011.5.25.119.1.1.1.1.10- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwVplsEntry
- Table
- hwVplsTable
- Siblings
- 44
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | qualify |
2 | unqualify |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwVplsVsiName This object indicates the VSI's name. | column | OctetString | .1.3.6.1.4.1.2011.5.25.119.1.1.1.1.1 |
| hwVplsMacLearnEnable This object indicates the enable sign of learning the MAC
address. | column | HWEnableValue | .1.3.6.1.4.1.2011.5.25.119.1.1.1.1.11 |
| hwVplsMacLimitEnable This object indicates the enable sign of the MAC addresses
number limit. | column | HWEnableValue | .1.3.6.1.4.1.2011.5.25.119.1.1.1.1.12 |
| hwVplsStatisticsEnable This object indicates the enable sign of statistics. | column | HWEnableValue | .1.3.6.1.4.1.2011.5.25.119.1.1.1.1.13 |
| hwVplsUnknowMulticast This object indicates the processing mode when the
multicast MAC entry not found in FDB. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.119.1.1.1.1.14 |
| hwVplsUnknowUnicast This object indicates the processing mode when the
unicast MAC entry not found in FDB. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.119.1.1.1.1.15 |
| hwVplsPreference This object indicates the preference.The default value is 0. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.119.1.1.1.1.16 |
| hwVplsVsiType This object indicates the VSI's type. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.119.1.1.1.1.17 |
| hwVplsAdminVsiName This object indicates the AdminVsi's name this VSI binding to | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2011.5.25.119.1.1.1.1.18 |
| hwVplsAcIsolateFlag This object indicates whether the AC in the VSI is isolated | column | HWEnableValue | .1.3.6.1.4.1.2011.5.25.119.1.1.1.1.19 |
| hwVplsSignal This object indicates the signal type.
If the signal type is LDP, VSI-ID must be designated.
If the signal type is BGP, RD must be designated.
The default value is unknown(255). | column | Enumeration | .1.3.6.1.4.1.2011.5.25.119.1.1.1.1.2 |
| hwVplsDiffServMode Different service mode of the interface binding of vsi ,
default is uniform. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.119.1.1.1.1.20 |
| hwVplsDiffServServiceClass PHB in the ingress PE, the value must be
be,f1,af2,af3,af4,ef,cs6,cs7.The default value is invalidClass(255). | column | Enumeration | .1.3.6.1.4.1.2011.5.25.119.1.1.1.1.21 |
| hwVplsDiffServColor Remarked color of packet in the ingress
PE, the value must be green,yellow,red.The default value is invalidColor(255). | column | Enumeration | .1.3.6.1.4.1.2011.5.25.119.1.1.1.1.22 |
| hwVplsDiffServDSName Name of different service domain | column | OctetString | .1.3.6.1.4.1.2011.5.25.119.1.1.1.1.23 |
| hwVplsInterfaceWithdraw Enable VSI send LDP mac-withdraw when VSI receive interface status changes event. | column | HWEnableValue | .1.3.6.1.4.1.2011.5.25.119.1.1.1.1.24 |
| hwVplsUpe2NpeWithdraw VSI forward message to all the NPE when VSI receive message from UPE. | column | HWEnableValue | .1.3.6.1.4.1.2011.5.25.119.1.1.1.1.25 |
| hwVplsUpe2UpeWithdraw VSI forward message to all the other UPE when VSI receive message from UPE. | column | HWEnableValue | .1.3.6.1.4.1.2011.5.25.119.1.1.1.1.26 |
| hwVplsNpe2UpeWithdraw VSI forward message to all the UPE when VSI receive message from NPE. | column | HWEnableValue | .1.3.6.1.4.1.2011.5.25.119.1.1.1.1.27 |
| hwVplsDiscovery This object indicates the discovery type.
If the discovery type is static, the signal must be LDP.
If the discovery type is auto, the signal must be BGP. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.119.1.1.1.1.28 |
| hwVplsMacWithdrawEnable This object indicates the enable sign of the MAC address withdraw. | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.119.1.1.1.1.29 |
| hwVplsRD This object indicates the Route Distinguisher. | column | OctetString | .1.3.6.1.4.1.2011.5.25.119.1.1.1.1.3 |
| hwVplsVsiCir This object indicates the committed information rate, based on VSI. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.119.1.1.1.1.30 |
| hwVplsVsiPir This object indicates the peak information rate, based on VSI. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.119.1.1.1.1.31 |
| hwVplsVsiQosProfileName This object indicates the QoS profile's name, based on VSI. | column | OctetString | .1.3.6.1.4.1.2011.5.25.119.1.1.1.1.32 |
| hwVplsAdminStatus This object indicates the VSI's admin status. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.119.1.1.1.1.33 |
| hwVplsIgnoreAcState This object indicates the enable sign of the ignorer of AC state. | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.119.1.1.1.1.34 |
| hwVplsEnableStatistic The enable sign of VSI's traffic statistics. | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.119.1.1.1.1.35 |
| hwVplsResetStatistic Reset traffic statistics of VSI. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.119.1.1.1.1.36 |
| hwVplsResetStatisticTime Last time of clean out. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.2011.5.25.119.1.1.1.1.37 |
| hwVplsAgingTime The aging time of the VSI MAC address. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.119.1.1.1.1.38 |
| hwVplsUnknowUnicastMacLearning The value of this object identifies
whether the MAC address learning function for the discarded unknown unicast packets is enabled. | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.119.1.1.1.1.39 |
| hwVplsVsiID This object indicates the VSI id.
The default value is 0. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.119.1.1.1.1.4 |
| hwVplsFlowLabel The value of this object identifies whether the PW FlowLabel is enabled. | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.119.1.1.1.1.40 |
| hwVplsServiceName The service name of the VSI | column | OctetString | .1.3.6.1.4.1.2011.5.25.119.1.1.1.1.41 |
| hwVplsVcType This object indicates the VC's encapsulation type. | column | HWL2VpnVcEncapsType | .1.3.6.1.4.1.2011.5.25.119.1.1.1.1.5 |
| hwVplsRowStatus RowStatus for this Table.
Restriction:
After the signal type, VSI ID and RD are configured,
the configuration can not be modify or delete. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.5.25.119.1.1.1.1.51 |
| hwVplsIngDiffServMode Ingress different service mode of the interface binding of vsi ,
default is uniform. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.119.1.1.1.1.52 |
| hwVplsEgDiffServMode Egress different service mode of the interface binding of vsi ,
default is uniform. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.119.1.1.1.1.53 |
| hwVplsDiffServTrustType Different service trust type of the interface binding of vsi ,
default is outpri. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.119.1.1.1.1.54 |
| hwVplsStatus This object indicates the VPLS's status. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.119.1.1.1.1.6 |
| hwVplsMtu This object indicates the VPLS's MTU.The default value is 1500. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.119.1.1.1.1.7 |
| hwVplsTunnelPolicy This object indicates the tunnel policy. | column | OctetString | .1.3.6.1.4.1.2011.5.25.119.1.1.1.1.8 |
| hwVplsDescription This object indicates the description information. | column | OctetString | .1.3.6.1.4.1.2011.5.25.119.1.1.1.1.9 |