hwVOPDPBOConfProfEsEL
HUAWEI-VOP-MIB ·
.1.3.6.1.4.1.2011.6.144.1.1.10.1.5
Object
column
r/w
0.5 dB Unsigned32
This configuration parameter defines the assumed electrical length of cables (E-side cables) connecting exchange based DSL services to a remote flexibility point (cabinet), that hosts the xTU-C that is subject to spectrally shaped downstream power back- off (DPBO) depending on this length. The electrical length is defined as the loss (in dB) of an equivalent length of hypothetical cable at a reference frequency defined by the network operator or in spectrum management regulations. This parameter shall be coded as an unsigned integer representing an electrical length from 0 dB (coded as 0) to 255.5 dB (coded as 511) in steps of 0.5 dB. All values in the range are valid. If this parameter is set to zero, the DPBO shall be disabled. Unit: 0.5dB.
Context
- MIB
- HUAWEI-VOP-MIB
- OID
.1.3.6.1.4.1.2011.6.144.1.1.10.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Units
- 0.5 dB
- Parent
- hwVOPDPBOConfProfEntry
- Table
- hwVOPDPBOConfProfTable
- Siblings
- 13
Syntax
0.5 dB Unsigned32
Values & Constraints
Object Constraints
range: 0-511
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwVOPDPBOConfProfIndex The hwVOPDPBOConfProfIndex identifies a row in the hwVOPDPBOConfProfTable. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.10.1.1 |
| hwVOPDPBOConfProfCableModelC The E-side Cable Model parameter C (DPBOESCMC) of the cable model (DPBOESCM) for cables
connecting exchange based DSL services to a remote flexibility point (cabinet), that hosts … | column | 2^-8 Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.10.1.10 |
| hwVOPDPBOConfProfMus This configuration parameter defines the assumed Minimum Usable receive PSD mask (in dBm/Hz)
for exchange based services, used to modify parameter xdsl2LConfProfDpboFMax (DPBOFMAX… | column | -0.5 dBm/Hz Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.10.1.11 |
| hwVOPDPBOConfProfFMin This configuration parameter defines the minimum frequency from which the DPBO shall be applied.
It ranges from 0 kHz (coded as 0) to 8832 kHz (coded as 2048) in steps of 4.3125 k… | column | 4.3125 kHz Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.10.1.12 |
| hwVOPDPBOConfProfFMax This configuration parameter defines the maximum frequency at which DPBO may be applied.
It ranges from 138 kHz (coded as 32) to 35323.6875 kHz (coded as 8191) in steps of 4.3125 … | column | 4.3125 kHz Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.10.1.13 |
| hwVOPDPBOConfFEXTFactor This configuration parameter defines the switch of the delta FEXT-factor.
Options:
1. disable(1) - The switch of the delta FEXT-factor is disabled
2. enable(2) - The switch of th… | column | Enumeration | .1.3.6.1.4.1.2011.6.144.1.1.10.1.14 |
| hwVOPDPBOConfProfRowStatus This object is used to create a new row or to modify or delete an existing row in this table.
A profile is activated by setting this object to 'active'.
Before a profile can be de… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.6.144.1.1.10.1.2 |
| hwVOPDPBOConfProfProfDescription The hwVOPDPBOConfProfProfDescription contains an optional human readable description for the profile. | column | OctetString | .1.3.6.1.4.1.2011.6.144.1.1.10.1.3 |
| hwVOPDPBOConfProfWkMdMask This configuration parameter defines the current enabled DPBO working mode mask.
DPBO working mode enabling:1-ADSL, 2-ADSL2+ 3-VDSL2.
Options :
1--current enabled dpbo work mode:A… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.10.1.4 |
| hwVOPDPBOConfProfEselMin DPBOESELMIN in dB is the minimum of all main cable losses for the KVz supplied when using
the SOL model (expansion of a KVz and VDSL2 provision of additional KVz areas from this K… | column | 0.5dB Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.10.1.6 |
| hwVOPDPBOConfProfEPsd This configuration parameter defines the PSD mask that is assumed to be permitted at the exchange.
This parameter shall use the same format as xdsl2LConfProfPsdMaskDs (PSDMASKds).… | column | Xdsl2PsdMaskDs | .1.3.6.1.4.1.2011.6.144.1.1.10.1.7 |
| hwVOPDPBOConfProfCableModelA The E-side Cable Model parameter A (DPBOESCMA) of the cable model (DPBOESCM) for cables
connecting exchange based DSL services to a remote flexibility point (cabinet), that hosts … | column | 2^-8 Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.10.1.8 |
| hwVOPDPBOConfProfCableModelB The E-side Cable Model parameter B (DPBOESCMB) of the cable model (DPBOESCM) for cables
connecting exchange based DSL services to a remote flexibility point (cabinet), that hosts … | column | 2^-8 Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.10.1.9 |