hwMgOverloadCtrlCfgPraAccessSetupRate
HUAWEI-VOLC-MIB ·
.1.3.6.1.4.1.2011.6.36.1.56.40
Object
scalar
r/w
Integer32
PRA(ISDN30e/ISDN30/DPNSS1) access rate. Unit: 0.01caps Default: 100
Context
- MIB
- HUAWEI-VOLC-MIB
- OID
.1.3.6.1.4.1.2011.6.36.1.56.40- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- hwMgOverloadCtrlCfgTable
- Siblings
- 40
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-10000
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwMgOverloadCtrlCfgPstnPowerDialerSupport Indicates the power dialer switch in the PSTN overload control.
Options:
1. enable(1) -indicates the power dialer switch in the PSTN overload control is enable
2. disable(2) -i… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.36.1.56.1 |
| hwMgOverloadCfgThreshold1 Indicates leak rate threshold 1 of the leaky bucket for MG overload control, that is, the maximum water level of the leaky bucket is 1.
Range: 1-100
Default : 45 | scalar | Integer32 | .1.3.6.1.4.1.2011.6.36.1.56.10 |
| hwMgOverloadCfgThreshold2 Indicates leak rate threshold 2 of the leaky bucket for MG overload control, that is, the maximum water level of the leaky bucket is 2.
Range: 1-100
Default : 55 | scalar | Integer32 | .1.3.6.1.4.1.2011.6.36.1.56.11 |
| hwMgOverloadCfgAdjustFactor Indicates the adjustment factor of the leaky bucket for MG overload control. It is used to upshift or downshift the adjustment speed of the leak rate. The smaller the adjustment f… | scalar | Integer32 | .1.3.6.1.4.1.2011.6.36.1.56.12 |
| hwMgOverloadCfgResumeTimer Indicates the delay of reporting the recovery alarm after the MG overload recovers, in the unit of second.
Range: 1-120
Default : 30 | scalar | Integer32 | .1.3.6.1.4.1.2011.6.36.1.56.13 |
| hwMgOverloadCfgBraWeightExchange Indicates the BRA user weight in the case of MG overload.
Range: 1-10000
Default : 200 | scalar | Integer32 | .1.3.6.1.4.1.2011.6.36.1.56.14 |
| hwMgOverloadCfgPraWeightExchange Indicates the PRA user weight in the case of MG overload.
Range: 1-10000
Default : 3000 | scalar | Integer32 | .1.3.6.1.4.1.2011.6.36.1.56.15 |
| hwMgOverloadCfgIsdnCapabExchange Indicates the conversion of the ISDN call capacity to the POTS call capacity in the case of MG overload.
Range: 1-10000
Default : 120 | scalar | Integer32 | .1.3.6.1.4.1.2011.6.36.1.56.16 |
| hwMgOverloadCtrlCfgBraPowerDialerSupport abandoned.
Options:
1. enable(1) -abandoned
2. disable(2) -abandoned
Default: enable | scalar | Enumeration | .1.3.6.1.4.1.2011.6.36.1.56.17 |
| hwMgOverloadCtrlCfgBraPowerDialerDetectionPeriod Indicates the duration of power dialer detection in the BRA overload control.
Range: 1-100
Default : 10 | scalar | Integer32 | .1.3.6.1.4.1.2011.6.36.1.56.18 |
| hwMgOverloadCtrlCfgBraPowerDialerEventsNum Indicates the number of non-retransmitted setup messages within the duration of power dialer detection in the BRA overload control.
Range: 1-10000
Default : 20 | scalar | Integer32 | .1.3.6.1.4.1.2011.6.36.1.56.19 |
| hwMgOverloadCtrlCfgPstnPowerDialerDetectionPeriod Indicates the duration of power dialer detection in the PSTN overload control.
Range:1-20
Default:10 | scalar | Integer32 | .1.3.6.1.4.1.2011.6.36.1.56.2 |
| hwMgOverloadCtrlCfgBraPowerDialerBaseTimer Indicates the duration of power dialer recovery detection in the BRA overload control.
Range: 1-10
Default : 2 | scalar | Integer32 | .1.3.6.1.4.1.2011.6.36.1.56.20 |
| hwMgOverloadCtrlCfgIsdn30ePowerDialerSupport abandoned.
Options:
1. enable(1) -abandoned
2. disable(2) -abandoned | scalar | Enumeration | .1.3.6.1.4.1.2011.6.36.1.56.21 |
| hwMgOverloadCtrlCfgIsdn30ePowerDialerDetectionPeriod Indicates the duration of power dialer detection in the ISDN30E overload control.
Range: 1-100
Default : 10 | scalar | Integer32 | .1.3.6.1.4.1.2011.6.36.1.56.22 |
| hwMgOverloadCtrlCfgIsdn30ePowerDialerEventsNum Indicates the number of non-retransmitted setup messages within the duration of power dialer detection in the ISDN30E overload control.
Range: 1-10000
Default : 200 | scalar | Integer32 | .1.3.6.1.4.1.2011.6.36.1.56.23 |
| hwMgOverloadCtrlCfgIsdn30ePowerDialerBaseTimer Indicates the duration of power dialer recovery detection in the ISDN30E overload control.
Range: 1-10
Default : 2 | scalar | Integer32 | .1.3.6.1.4.1.2011.6.36.1.56.24 |
| hwMgOverloadCtrlCfgDpnssPowerDialerSupport abandoned.
Options:
1. enable(1) -abandoned
2. disable(2) -abandoned | scalar | Enumeration | .1.3.6.1.4.1.2011.6.36.1.56.25 |
| hwMgOverloadCtrlCfgDpnssPowerDialerDetectionPeriod Indicates the duration of power dialer detection in the DPNSS overload control.
Range: 1-100
Default : 10 | scalar | Integer32 | .1.3.6.1.4.1.2011.6.36.1.56.26 |
| hwMgOverloadCtrlCfgDpnssPowerDialerEventsNum Indicates the number of non-retransmitted ISRM messages within the duration of power dialer detection in the DPNSS overload control.
Range: 1-10000
Default : 200 | scalar | Integer32 | .1.3.6.1.4.1.2011.6.36.1.56.27 |
| hwMgOverloadCtrlCfgDpnssPowerDialerBaseTimer Indicates the duration of power dialer recovery detection in the DPNSS overload control.
Range: 1-10
Default : 2 | scalar | Integer32 | .1.3.6.1.4.1.2011.6.36.1.56.28 |
| hwMgOverloadCtrlCfgDass2PowerDialerSupport abandoned.
Options:
1. enable(1) -abandoned
2. disable(2) -abandoned | scalar | Enumeration | .1.3.6.1.4.1.2011.6.36.1.56.29 |
| hwMgOverloadCtrlCfgPstnPowerDialerEventsNum Indicates the count of offhooks within the duration of power dialer detection in the PSTN overload control.
Range:2-50
Default:20 | scalar | Integer32 | .1.3.6.1.4.1.2011.6.36.1.56.3 |
| hwMgOverloadCtrlCfgDass2PowerDialerDetectionPeriod Indicates the duration of power dialer detection in the DASS2 overload control.
Range: 1-100
Default : 10 | scalar | Integer32 | .1.3.6.1.4.1.2011.6.36.1.56.30 |
| hwMgOverloadCtrlCfgDass2PowerDialerEventsNum Indicates the number of non-retransmitted ISRM messages within the duration of power dialer detection in the DASS2 overload control.
Range: 1-10000
Default : 200 | scalar | Integer32 | .1.3.6.1.4.1.2011.6.36.1.56.31 |
| hwMgOverloadCtrlCfgDass2PowerDialerBaseTimer Indicates the duration of power dialer recovery detection in the DASS2 overload control.
Range: 1-10
Default : 2 | scalar | Integer32 | .1.3.6.1.4.1.2011.6.36.1.56.32 |
| hwMgOverloadCtrlCfgL3ProxyTimerti01 Indicates the length of the protection timer when the ISDN proxy is in the BlackHole state, at a step of 5.
Range: 0-30
Default : 20 | scalar | Integer32 | .1.3.6.1.4.1.2011.6.36.1.56.33 |
| hwMgOverloadCtrlCfgL3ProxyTimerti02 Indicates the length of the protection timer when the DSS2 proxy is in the Overlap state, at a step of 1.
Range: 10-20
Default : 10 | scalar | Integer32 | .1.3.6.1.4.1.2011.6.36.1.56.34 |
| hwMgOverloadCtrlCfgL3ProxyTimerti03 Indicates the length of the protection timer when the ISDN proxy is in the Fail_call state, at a step of 1.
Range: 0-15
Default : 10 | scalar | Integer32 | .1.3.6.1.4.1.2011.6.36.1.56.35 |
| hwMgOverloadCtrlCfgL3ProxyTimerti05 Indicates the length of the protection timer when the ISDN proxy is in the Clash state, at a step of 5.
Range: 0-30
Default : 20 | scalar | Integer32 | .1.3.6.1.4.1.2011.6.36.1.56.36 |
| hwMgOverloadCtrlCfgL3ProxyTimerti06 Indicates the length of the protection timer when the ISDN proxy is in the Fail_delay state, at a step of 5.
Range: 0-30
Default : 20 | scalar | Integer32 | .1.3.6.1.4.1.2011.6.36.1.56.37 |
| hwMgOverloadCtrlCfgL3ProxyTimert302 Indicates the length of the protection timer when the ISDN proxy is in the Fail_delay state, at a step of 1.
Range: 10-15
Default : 10 | scalar | Integer32 | .1.3.6.1.4.1.2011.6.36.1.56.38 |
| hwMgOverloadCtrlCfgBraAccessSetupRate Bra access rate.
Unit: 0.01caps
Default: 10 | scalar | Integer32 | .1.3.6.1.4.1.2011.6.36.1.56.39 |
| hwMgOverloadCtrlCfgPstnPowerDialerBaseTimer Indicates the duration of power dialer recovery detection in the PSTN overload control.
Range:1-10
Default:2 | scalar | Integer32 | .1.3.6.1.4.1.2011.6.36.1.56.4 |
| hwMgOverloadCtrlCfgAccessSetupRateBucketDepth ISDN Access rate bucket threshold
Default: 10 | scalar | Integer32 | .1.3.6.1.4.1.2011.6.36.1.56.41 |
| hwMgOverloadCfgCallSurgeSupport Indicates the call surge switch in the MG overload control.
Options:
1. enable(1) -indicates the call surge switch in the MG overload control is enable
2. disable(2) -indicates… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.36.1.56.5 |
| hwMgOverloadCfgOnhookSurgeSupport Indicates the onhook surge switch in the MG overload control.
Options:
1. enable(1) -indicates the onhook surge switch in the MG overload control is enable
2. disable(2) -indic… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.36.1.56.6 |
| hwMgOverloadCfgRestrictCpuLevel Indicates the expected CPU usage in the case of MG overload.
Range: 1-99
Default : 70 | scalar | Integer32 | .1.3.6.1.4.1.2011.6.36.1.56.7 |
| hwMgOverloadCfgCalledSurgeSupport Indicates the called surge switch in the MG overload control.
Options:
1. enable(1) -indicates the called surge switch in the MG overload control is enable
2. disable(2) -indic… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.36.1.56.8 |
| hwMgOverloadCfgInitLeakRate Indicates the initial leak rate of the leaky bucket for MG overload control. Initial value: 6 for BT and 15 for other carriers.
Range: 1-100 | scalar | Integer32 | .1.3.6.1.4.1.2011.6.36.1.56.9 |