hwOntVoipToneIndex
HUAWEI-VOIP-ONT-MIB ·
.1.3.6.1.4.1.2011.6.36.11.24.1.2
Object
column
Unsigned32
Indicates the index of the ont voip tone. Options: 1. Busy 2. Confirmation 3. Dial 4. Message waiting 5. Off hook warning (receiver off hook) 6. Ringback (audible ring) 7. Reorder 8. Stutter dial 9. Call waiting 1 10. Call waiting 2 11. Call waiting 3 12. Call waiting 4 13. Alerting signal 14. Special dial 15. Special info 16. Release 17. Congestion 18. User defined 1 19. User defined 2 20. User defined 3 21. User defined 4 22..32. Reserved 33. Intrusion 34. Dead tone 35..223. Reserved 224..255. Vendor-specific codes, not to be standardized
Context
- MIB
- HUAWEI-VOIP-ONT-MIB
- OID
.1.3.6.1.4.1.2011.6.36.11.24.1.2- Type
- column
- Access
- noaccess
- Status
- current
- Parent
- hwOntVoipToneEntry
- Table
- hwOntVoipToneTable
- Siblings
- 80
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 1-255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwOntVoipToneProfileIndex Indicates the index of the voip ont profile. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.36.11.24.1.1 |
| hwOntVoipToneCadence1Level4 Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution.
This parameter is optiona… | column | Integer32 | .1.3.6.1.4.1.2011.6.36.11.24.1.10 |
| hwOntVoipToneCadence1ModulationFreq The pair of frequency-power components allows the composite tone to be modulated (warble effect). If this effect is not to be used, the frequency should be set to 0.
This paramete… | column | Integer32 | .1.3.6.1.4.1.2011.6.36.11.24.1.11 |
| hwOntVoipToneCadence1ModulationLevel The pair of frequency-power components allows the composite tone to be modulated (warble effect). If this effect is not to be used, the frequency should be set to 0.
This paramete… | column | Integer32 | .1.3.6.1.4.1.2011.6.36.11.24.1.12 |
| hwOntVoipToneCadence1OnTime Indicates the tone on duration of cadence 1. Value -1 indicates that the ringing duration is invalid or is not set.
Unit: millisecond (ms).
This parameter is mandatory. | column | Integer32 | .1.3.6.1.4.1.2011.6.36.11.24.1.13 |
| hwOntVoipToneCadence1OffTime Indicates the tone off duration of cadence 1. If the tone is off, the frequency and power fields are not meaningful. Value -1 indicates that the ringing duration is invalid or is … | column | Integer32 | .1.3.6.1.4.1.2011.6.36.11.24.1.14 |
| hwOntVoipToneCadence1RepeatTimes Indicates the times of playing cadence 1. If this parameter is set, the cadence is played for the specified times according to the ratio of ontime to offtime.
This parameter is op… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.36.11.24.1.15 |
| hwOntVoipToneCadence2Freq1 Indicates the tone frequency 1 used by cadence 2, which can be single-frequency, dual-frequency, three-frequency, and four-frequency.
Single-frequency tone: Only freq1 is config… | column | Integer32 | .1.3.6.1.4.1.2011.6.36.11.24.1.16 |
| hwOntVoipToneCadence2Freq2 Indicates the tone frequency 2 used by cadence 2, which can be single-frequency, dual-frequency, three-frequency, and four-frequency.
Single-frequency tone: Only freq1 is config… | column | Integer32 | .1.3.6.1.4.1.2011.6.36.11.24.1.17 |
| hwOntVoipToneCadence2Freq3 Indicates the tone frequency 3 used by cadence 2, which can be single-frequency, dual-frequency, three-frequency, and four-frequency.
Single-frequency tone: Only freq1 is config… | column | Integer32 | .1.3.6.1.4.1.2011.6.36.11.24.1.18 |
| hwOntVoipToneCadence2Freq4 Indicates the tone frequency 4 used by cadence 2, which can be single-frequency, dual-frequency, three-frequency, and four-frequency.
Single-frequency tone: Only freq1 is config… | column | Integer32 | .1.3.6.1.4.1.2011.6.36.11.24.1.19 |
| hwOntVoipToneCadence2Level1 Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution. Three additional pairs of… | column | Integer32 | .1.3.6.1.4.1.2011.6.36.11.24.1.20 |
| hwOntVoipToneCadence2Level2 Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution.
This parameter is optiona… | column | Integer32 | .1.3.6.1.4.1.2011.6.36.11.24.1.21 |
| hwOntVoipToneCadence2Level3 Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution.
This parameter is optiona… | column | Integer32 | .1.3.6.1.4.1.2011.6.36.11.24.1.22 |
| hwOntVoipToneCadence2Level4 Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution.
This parameter is optiona… | column | Integer32 | .1.3.6.1.4.1.2011.6.36.11.24.1.23 |
| hwOntVoipToneCadence2ModulationFreq The pair of frequency-power components allows the composite tone to be modulated (warble effect). If this effect is not to be used, the frequency should be set to 0.
This paramete… | column | Integer32 | .1.3.6.1.4.1.2011.6.36.11.24.1.24 |
| hwOntVoipToneCadence2ModulationLevel The pair of frequency-power components allows the composite tone to be modulated (warble effect). If this effect is not to be used, the frequency should be set to 0.
This paramete… | column | Integer32 | .1.3.6.1.4.1.2011.6.36.11.24.1.25 |
| hwOntVoipToneCadence2OnTime Indicates the tone on duration of cadence 2. Value -1 indicates that the ringing duration is invalid or is not set.
Unit: millisecond (ms).
This parameter is optional. | column | Integer32 | .1.3.6.1.4.1.2011.6.36.11.24.1.26 |
| hwOntVoipToneCadence2OffTime Indicates the tone off duration of cadence 2. If the tone is off, the frequency and power fields are not meaningful. Value -1 indicates that the ringing duration is invalid or is … | column | Integer32 | .1.3.6.1.4.1.2011.6.36.11.24.1.27 |
| hwOntVoipToneCadence2RepeatTimes Indicates the times of playing cadence 2. If this parameter is set, the cadence is played for the specified times according to the ratio of ontime to offtime.
This parameter is op… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.36.11.24.1.28 |
| hwOntVoipToneCadence3Freq1 Indicates the tone frequency 1 used by cadence 3, which can be single-frequency, dual-frequency, three-frequency, and four-frequency.
Single-frequency tone: Only freq1 is config… | column | Integer32 | .1.3.6.1.4.1.2011.6.36.11.24.1.29 |
| hwOntVoipToneCadence1Freq1 Indicates the tone frequency 1 used by cadence 1, which can be single-frequency, dual-frequency, three-frequency, and four-frequency.
Single-frequency tone: Only freq1 is config… | column | Integer32 | .1.3.6.1.4.1.2011.6.36.11.24.1.3 |
| hwOntVoipToneCadence3Freq2 Indicates the tone frequency 2 used by cadence 3, which can be single-frequency, dual-frequency, three-frequency, and four-frequency.
Single-frequency tone: Only freq1 is config… | column | Integer32 | .1.3.6.1.4.1.2011.6.36.11.24.1.30 |
| hwOntVoipToneCadence3Freq3 Indicates the tone frequency 3 used by cadence 3, which can be single-frequency, dual-frequency, three-frequency, and four-frequency.
Single-frequency tone: Only freq1 is config… | column | Integer32 | .1.3.6.1.4.1.2011.6.36.11.24.1.31 |
| hwOntVoipToneCadence3Freq4 Indicates the tone frequency 4 used by cadence 3, which can be single-frequency, dual-frequency, three-frequency, and four-frequency.
Single-frequency tone: Only freq1 is config… | column | Integer32 | .1.3.6.1.4.1.2011.6.36.11.24.1.32 |
| hwOntVoipToneCadence3Level1 Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution. Three additional pairs of… | column | Integer32 | .1.3.6.1.4.1.2011.6.36.11.24.1.33 |
| hwOntVoipToneCadence3Level2 Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution.
This parameter is optiona… | column | Integer32 | .1.3.6.1.4.1.2011.6.36.11.24.1.34 |
| hwOntVoipToneCadence3Level3 Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution.
This parameter is optiona… | column | Integer32 | .1.3.6.1.4.1.2011.6.36.11.24.1.35 |
| hwOntVoipToneCadence3Level4 Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution.
This parameter is optiona… | column | Integer32 | .1.3.6.1.4.1.2011.6.36.11.24.1.36 |
| hwOntVoipToneCadence3ModulationFreq The pair of frequency-power components allows the composite tone to be modulated (warble effect). If this effect is not to be used, the frequency should be set to 0.
This paramete… | column | Integer32 | .1.3.6.1.4.1.2011.6.36.11.24.1.37 |
| hwOntVoipToneCadence3ModulationLevel The pair of frequency-power components allows the composite tone to be modulated (warble effect). If this effect is not to be used, the frequency should be set to 0.
This paramete… | column | Integer32 | .1.3.6.1.4.1.2011.6.36.11.24.1.38 |
| hwOntVoipToneCadence3OnTime Indicates the tone on duration of cadence 3. Value -1 indicates that the ringing duration is invalid or is not set.
Unit: millisecond (ms).
This parameter is optional. | column | Integer32 | .1.3.6.1.4.1.2011.6.36.11.24.1.39 |
| hwOntVoipToneCadence1Freq2 Indicates the tone frequency 2 used by cadence 1, which can be single-frequency, dual-frequency, three-frequency, and four-frequency.
Single-frequency tone: Only freq1 is config… | column | Integer32 | .1.3.6.1.4.1.2011.6.36.11.24.1.4 |
| hwOntVoipToneCadence3OffTime Indicates the tone off duration of cadence 3. If the tone is off, the frequency and power fields are not meaningful. Value -1 indicates that the ringing duration is invalid or is … | column | Integer32 | .1.3.6.1.4.1.2011.6.36.11.24.1.40 |
| hwOntVoipToneCadence3RepeatTimes Indicates the times of playing cadence 3. If this parameter is set, the cadence is played for the specified times according to the ratio of ontime to offtime.
This parameter is op… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.36.11.24.1.41 |
| hwOntVoipToneCadence4Freq1 Indicates the tone frequency 1 used by cadence 4, which can be single-frequency, dual-frequency, three-frequency, and four-frequency.
Single-frequency tone: Only freq1 is config… | column | Integer32 | .1.3.6.1.4.1.2011.6.36.11.24.1.42 |
| hwOntVoipToneCadence4Freq2 Indicates the tone frequency 2 used by cadence 4, which can be single-frequency, dual-frequency, three-frequency, and four-frequency.
Single-frequency tone: Only freq1 is config… | column | Integer32 | .1.3.6.1.4.1.2011.6.36.11.24.1.43 |
| hwOntVoipToneCadence4Freq3 Indicates the tone frequency 3 used by cadence 4, which can be single-frequency, dual-frequency, three-frequency, and four-frequency.
Single-frequency tone: Only freq1 is config… | column | Integer32 | .1.3.6.1.4.1.2011.6.36.11.24.1.44 |
| hwOntVoipToneCadence4Freq4 Indicates the tone frequency 4 used by cadence 4, which can be single-frequency, dual-frequency, three-frequency, and four-frequency.
Single-frequency tone: Only freq1 is config… | column | Integer32 | .1.3.6.1.4.1.2011.6.36.11.24.1.45 |
| hwOntVoipToneCadence4Level1 Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution. Three additional pairs of… | column | Integer32 | .1.3.6.1.4.1.2011.6.36.11.24.1.46 |
| hwOntVoipToneCadence4Level2 Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution.
This parameter is optiona… | column | Integer32 | .1.3.6.1.4.1.2011.6.36.11.24.1.47 |
| hwOntVoipToneCadence4Level3 Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution.
This parameter is optiona… | column | Integer32 | .1.3.6.1.4.1.2011.6.36.11.24.1.48 |
| hwOntVoipToneCadence4Level4 Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution.
This parameter is optiona… | column | Integer32 | .1.3.6.1.4.1.2011.6.36.11.24.1.49 |
| hwOntVoipToneCadence1Freq3 Indicates the tone frequency 3 used by cadence 1, which can be single-frequency, dual-frequency, three-frequency, and four-frequency.
Single-frequency tone: Only freq1 is config… | column | Integer32 | .1.3.6.1.4.1.2011.6.36.11.24.1.5 |
| hwOntVoipToneCadence4ModulationFreq The pair of frequency-power components allows the composite tone to be modulated (warble effect). If this effect is not to be used, the frequency should be set to 0.
This paramete… | column | Integer32 | .1.3.6.1.4.1.2011.6.36.11.24.1.50 |
| hwOntVoipToneCadence4ModulationLevel The pair of frequency-power components allows the composite tone to be modulated (warble effect). If this effect is not to be used, the frequency should be set to 0.
This paramete… | column | Integer32 | .1.3.6.1.4.1.2011.6.36.11.24.1.51 |
| hwOntVoipToneCadence4OnTime Indicates the tone on duration of cadence 4. Value -1 indicates that the ringing duration is invalid or is not set.
Unit: millisecond (ms).
This parameter is optional. | column | Integer32 | .1.3.6.1.4.1.2011.6.36.11.24.1.52 |
| hwOntVoipToneCadence4OffTime Indicates the tone off duration of cadence 4. If the tone is off, the frequency and power fields are not meaningful. Value -1 indicates that the ringing duration is invalid or is … | column | Integer32 | .1.3.6.1.4.1.2011.6.36.11.24.1.53 |
| hwOntVoipToneCadence4RepeatTimes Indicates the times of playing cadence 4. If this parameter is set, the cadence is played for the specified times according to the ratio of ontime to offtime.
This parameter is op… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.36.11.24.1.54 |
| hwOntVoipToneCadence5Freq1 Indicates the tone frequency 1 used by cadence 5, which can be single-frequency, dual-frequency, three-frequency, and four-frequency.
Single-frequency tone: Only freq1 is config… | column | Integer32 | .1.3.6.1.4.1.2011.6.36.11.24.1.55 |
| hwOntVoipToneCadence5Freq2 Indicates the tone frequency 2 used by cadence 5, which can be single-frequency, dual-frequency, three-frequency, and four-frequency.
Single-frequency tone: Only freq1 is config… | column | Integer32 | .1.3.6.1.4.1.2011.6.36.11.24.1.56 |
| hwOntVoipToneCadence5Freq3 Indicates the tone frequency 3 used by cadence 5, which can be single-frequency, dual-frequency, three-frequency, and four-frequency.
Single-frequency tone: Only freq1 is config… | column | Integer32 | .1.3.6.1.4.1.2011.6.36.11.24.1.57 |
| hwOntVoipToneCadence5Freq4 Indicates the tone frequency 4 used by cadence 5, which can be single-frequency, dual-frequency, three-frequency, and four-frequency.
Single-frequency tone: Only freq1 is config… | column | Integer32 | .1.3.6.1.4.1.2011.6.36.11.24.1.58 |
| hwOntVoipToneCadence5Level1 Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution. Three additional pairs of… | column | Integer32 | .1.3.6.1.4.1.2011.6.36.11.24.1.59 |
| hwOntVoipToneCadence1Freq4 Indicates the tone frequency 4 used by cadence 1, which can be single-frequency, dual-frequency, three-frequency, and four-frequency.
Single-frequency tone: Only freq1 is config… | column | Integer32 | .1.3.6.1.4.1.2011.6.36.11.24.1.6 |
| hwOntVoipToneCadence5Level2 Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution.
This parameter is optiona… | column | Integer32 | .1.3.6.1.4.1.2011.6.36.11.24.1.60 |
| hwOntVoipToneCadence5Level3 Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution.
This parameter is optiona… | column | Integer32 | .1.3.6.1.4.1.2011.6.36.11.24.1.61 |
| hwOntVoipToneCadence5Level4 Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution.
This parameter is optiona… | column | Integer32 | .1.3.6.1.4.1.2011.6.36.11.24.1.62 |
| hwOntVoipToneCadence5ModulationFreq The pair of frequency-power components allows the composite tone to be modulated (warble effect). If this effect is not to be used, the frequency should be set to 0.
This paramete… | column | Integer32 | .1.3.6.1.4.1.2011.6.36.11.24.1.63 |
| hwOntVoipToneCadence5ModulationLevel The pair of frequency-power components allows the composite tone to be modulated (warble effect). If this effect is not to be used, the frequency should be set to 0.
This paramete… | column | Integer32 | .1.3.6.1.4.1.2011.6.36.11.24.1.64 |
| hwOntVoipToneCadence5OnTime Indicates the tone on duration of cadence 5. Value -1 indicates that the ringing duration is invalid or is not set.
Unit: millisecond (ms).
This parameter is optional. | column | Integer32 | .1.3.6.1.4.1.2011.6.36.11.24.1.65 |
| hwOntVoipToneCadence5OffTime Indicates the tone off duration of cadence 5. If the tone is off, the frequency and power fields are not meaningful. Value -1 indicates that the ringing duration is invalid or is … | column | Integer32 | .1.3.6.1.4.1.2011.6.36.11.24.1.66 |
| hwOntVoipToneCadence5RepeatTimes Indicates the times of playing cadence 5. If this parameter is set, the cadence is played for the specified times according to the ratio of ontime to offtime.
This parameter is op… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.36.11.24.1.67 |
| hwOntVoipToneCadence6Freq1 Indicates the tone frequency 1 used by cadence 6, which can be single-frequency, dual-frequency, three-frequency, and four-frequency.
Single-frequency tone: Only freq1 is config… | column | Integer32 | .1.3.6.1.4.1.2011.6.36.11.24.1.68 |
| hwOntVoipToneCadence6Freq2 Indicates the tone frequency 2 used by cadence 6, which can be single-frequency, dual-frequency, three-frequency, and four-frequency.
Single-frequency tone: Only freq1 is config… | column | Integer32 | .1.3.6.1.4.1.2011.6.36.11.24.1.69 |
| hwOntVoipToneCadence1Level1 Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution. Three additional pairs of… | column | Integer32 | .1.3.6.1.4.1.2011.6.36.11.24.1.7 |
| hwOntVoipToneCadence6Freq3 Indicates the tone frequency 3 used by cadence 6, which can be single-frequency, dual-frequency, three-frequency, and four-frequency.
Single-frequency tone: Only freq1 is config… | column | Integer32 | .1.3.6.1.4.1.2011.6.36.11.24.1.70 |
| hwOntVoipToneCadence6Freq4 Indicates the tone frequency 4 used by cadence 6, which can be single-frequency, dual-frequency, three-frequency, and four-frequency.
Single-frequency tone: Only freq1 is config… | column | Integer32 | .1.3.6.1.4.1.2011.6.36.11.24.1.71 |
| hwOntVoipToneCadence6Level1 Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution. Three additional pairs of… | column | Integer32 | .1.3.6.1.4.1.2011.6.36.11.24.1.72 |
| hwOntVoipToneCadence6Level2 Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution.
This parameter is optiona… | column | Integer32 | .1.3.6.1.4.1.2011.6.36.11.24.1.73 |
| hwOntVoipToneCadence6Level3 Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution.
This parameter is optiona… | column | Integer32 | .1.3.6.1.4.1.2011.6.36.11.24.1.74 |
| hwOntVoipToneCadence6Level4 Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution.
This parameter is optiona… | column | Integer32 | .1.3.6.1.4.1.2011.6.36.11.24.1.75 |
| hwOntVoipToneCadence6ModulationFreq The pair of frequency-power components allows the composite tone to be modulated (warble effect). If this effect is not to be used, the frequency should be set to 0.
This paramete… | column | Integer32 | .1.3.6.1.4.1.2011.6.36.11.24.1.76 |
| hwOntVoipToneCadence6ModulationLevel The pair of frequency-power components allows the composite tone to be modulated (warble effect). If this effect is not to be used, the frequency should be set to 0.
This paramete… | column | Integer32 | .1.3.6.1.4.1.2011.6.36.11.24.1.77 |
| hwOntVoipToneCadence6OnTime Indicates the tone on duration of cadence 6. Value -1 indicates that the ringing duration is invalid or is not set.
Unit: millisecond (ms).
This parameter is optional. | column | Integer32 | .1.3.6.1.4.1.2011.6.36.11.24.1.78 |
| hwOntVoipToneCadence6OffTime Indicates the tone off duration of cadence 6. If the tone is off, the frequency and power fields are not meaningful. Value -1 indicates that the ringing duration is invalid or is … | column | Integer32 | .1.3.6.1.4.1.2011.6.36.11.24.1.79 |
| hwOntVoipToneCadence1Level2 Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution.
This parameter is optiona… | column | Integer32 | .1.3.6.1.4.1.2011.6.36.11.24.1.8 |
| hwOntVoipToneCadence6RepeatTimes Indicates the times of playing cadence 6. If this parameter is set, the cadence is played for the specified times according to the ratio of ontime to offtime.
This parameter is op… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.36.11.24.1.80 |
| hwOntVoipToneRowStatus Options:
1.active(1) -indicates active
2.notInService(2) -indicates not in service
3.notReady(3) -indicates not ready
4.createAndGo(4) -indicates create and… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.6.36.11.24.1.81 |
| hwOntVoipToneCadence1Level3 Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution.
This parameter is optiona… | column | Integer32 | .1.3.6.1.4.1.2011.6.36.11.24.1.9 |