hwSaveRequestID
HUAWEI-SWITCHOVER-MIB ·
.1.3.6.1.4.1.2011.6.22.1.2.8
Object
The saving of the operation request ID. The request ID is used for identifying each saving operation. It must be unique, and cannot be issued separately. The operation request ID is used for loading the reliability table and querying whether each saving operation is successful. The hwSaveRequestID value of -1 indicates there is no saving operation.
Context
- MIB
- HUAWEI-SWITCHOVER-MIB
- OID
.1.3.6.1.4.1.2011.6.22.1.2.8- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- hwDataSave
- Siblings
- 12
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwAutoSaveSwitch The switch of automatic data saving.
Options:
1. on(1) -indicates that the automatic data saving is enabled.
The system saves the data and configuration files periodi… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.22.1.2.1 |
| hwActiveConfigurationResult The result of Configuration Actived.
Options:
1. partialFailure(1) -indicates that activating the configuration files
of the active control board fails.
2. … | scalar | Enumeration | .1.3.6.1.4.1.2011.6.22.1.2.10 |
| hwAutoSaveCfgChangedtimer The time of saving configuration files automatically.
The time is in the unit of 10 ms,with a value range of
12000-8640000 (two minutes to one day). If the value of
the object h… | scalar | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.2011.6.22.1.2.11 |
| hwAutoSaveType The type of automatic saving.
Options:
1. database(1) -indicates the saving of only the database.
2. configuration(2) -indicates the saving of only the configuration files.… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.22.1.2.12 |
| hwEraseData The erasing of the database. If the configuration data of the active or
standby control board needs to be erased, the database requires to be
erased. After the database is erase… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.22.1.2.13 |
| hwAutoSaveCycle The period of automatic data saving. The period is in the unit of 10 ms,
with a value range of 60000-60480000 (10 minutes to one week).
If the data saving is enabl… | scalar | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.2011.6.22.1.2.2 |
| hwImmediateSave It is the object for saving the data and the configuration file.
Options:
1. saveDBBDRN(1) -indicates that the data and the configuration file are saved
at the … | scalar | Enumeration | .1.3.6.1.4.1.2011.6.22.1.2.3 |
| hwAutoSaveTimeSwitch The switch of automatic data saving at the absolute time.
Options:
1. on(1) -indicates that the automatic data saving at the absolute time is enabled.
That is, the da… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.22.1.2.4 |
| hwAutoSaveTime The time of automatic data saving. This value can be converted into the hexadecimal
number 0x00hhmmss (hh representing hour, mm representing minute,
and ss representing second),… | scalar | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.2011.6.22.1.2.5 |
| hwSaveData Immediate saving of the database. Only database is saved through the operation
on this object.
Options:
1. nosavedata(-1) -No database saving is performed in the system.
2. sav… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.22.1.2.6 |
| hwSaveConfiguration It is the object for saving the configuration file.
Options:
1. saveconfiguration(1) -indicates that only the configuration file is saved,
the… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.22.1.2.7 |
| hwActiveConfiguration The activation of the configuration files.
Options:
1. noactiveConfiguration(-1) -indicates that the configuration files are not activated.
2. activeConfiguration(1) -… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.22.1.2.9 |