hwSmartLinkGcGroupStatus
HUAWEI-SMARTLINK-MIB ·
.1.3.6.1.4.1.2011.5.25.42.5.1.8.1.4
Object
column
Enumeration
Working status of smart link group, include none, master, slave, idle and init. none: all ports in group are inactive. Master: master port is active, and slave port is inactive. Slave: master port is inactive, and slave port is active. Idle: smart-link group is disable, and all ports are inactive. Init: smart-link group is enable, and all ports are inactive.
Context
- MIB
- HUAWEI-SMARTLINK-MIB
- OID
.1.3.6.1.4.1.2011.5.25.42.5.1.8.1.4- Type
- column
- Access
- readonly
- Status
- current
- Parent
- hwSmartLinkGroupCfgEntry
- Table
- hwSmartLinkGroupCfgTable
- Siblings
- 13
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | none |
2 | master |
3 | slave |
4 | idle |
5 | init |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwSmartLinkGcGroupId Smart link group index. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.42.5.1.8.1.1 |
| hwSmartLinkGcRevertWtrTime Set wait-to-restore time. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.42.5.1.8.1.10 |
| hwSmartLinkGcRevertEnable When wait-to-restore timer is over, the smart link group link will be switched. | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.42.5.1.8.1.11 |
| hwSmartLinkGcManual The link was switched every setting manual command. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.42.5.1.8.1.12 |
| hwSmartLinkGcRowStatus Status of smart link group row. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.5.25.42.5.1.8.1.13 |
| hwSmartLinkGcAuthMode Set the password mode of flush packets which send from this smart link group. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.42.5.1.8.1.14 |
| hwSmartLinkGcMasterIfIndex The master interface index of smart link group. | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.2011.5.25.42.5.1.8.1.2 |
| hwSmartLinkGcSlaveIfIndex The slave interface index of smart link group. | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.2011.5.25.42.5.1.8.1.3 |
| hwSmartLinkGcEnable Startup or close the smart link group.
Before startup the smart link group, the group must be created. | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.42.5.1.8.1.5 |
| hwSmartLinkGcSendControlVlan Set the tag of flush packets which send from this smart link group. | column | Q-BRIDGE-MIBVlanIdOrNone | .1.3.6.1.4.1.2011.5.25.42.5.1.8.1.6 |
| hwSmartLinkGcSendPassword Set password of flush packets which send from this smart link group. | column | OctetString | .1.3.6.1.4.1.2011.5.25.42.5.1.8.1.7 |
| hwSmartLinkGcLock Active port was locked on master port | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.42.5.1.8.1.8 |
| hwSmartLinkGcForce Active port was locked on slave port. | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.42.5.1.8.1.9 |