systemHealth
HUAWEI-SERVER-IBMC-MIB ·
.1.3.6.1.4.1.2011.2.235.1.1.1.1
Object
scalar
Enumeration
systemHealth information about system present state of health. This value will be one of the following: (1-OK, 2-Minor, 3-Major, 4-Critical)
Context
- MIB
- HUAWEI-SERVER-IBMC-MIB
- OID
.1.3.6.1.4.1.2011.2.235.1.1.1.1- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- system
- Siblings
- 30
Syntax
Enumeration
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| systemGuid The GUID is hex string such as
********-****-****-****-************. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.2011.2.235.1.1.1.10 |
| identify identify use to control on or off of led.
identify mode:
0 - Off
1 - Temporary On
2 - Force Identify On
set format: <mode>,[ontime]
get format: <… | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.2011.2.235.1.1.1.11 |
| systemPowerState System Power Status Get.
1 - Power Off
2 - Power On
System Power Status Set.
1 - Normal Power Off
2 - Power On
3 - Forced System Reset
4 - Forced Power Cycle
5 - Forced Pow… | scalar | Enumeration | .1.3.6.1.4.1.2011.2.235.1.1.1.12 |
| presentSystemPower Display the present system power. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.2.235.1.1.1.13 |
| deviceOwnerID The device owner ID, maxlength is 64 characters. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.2011.2.235.1.1.1.14 |
| deviceslotID The device slot ID of a server exists, the value ranges from 1 to 80. Otherwise, the value is 0. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.2011.2.235.1.1.1.15 |
| remoteOEMInfo The remoteOEMinfo, maxlength is 255 characters. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.2011.2.235.1.1.1.16 |
| deviceLocationInfo The deviceLocationInfo between 0 and 64 characters.
Default value is server room. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.2011.2.235.1.1.1.17 |
| deviceRemoteManageID The deviceRemoteManageID between 0 and 64 characters. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.2011.2.235.1.1.1.18 |
| bmcReboot Reboot the BMC management system.When set, the value is only 1, write only. | scalar | Enumeration | .1.3.6.1.4.1.2011.2.235.1.1.1.19 |
| systemBootsequence Decide the system's first boot device.
1 - No override
2 - Force PXE
3 - Force boot from default Hard-drive
4 - Force boot from default CD/DVD
5 - Force boot from Floppy/prim… | scalar | Enumeration | .1.3.6.1.4.1.2011.2.235.1.1.1.2 |
| powerOnPermit Set power on permission. notPermit 1, permit 2. | scalar | Enumeration | .1.3.6.1.4.1.2011.2.235.1.1.1.20 |
| autoDiscoveryEnable Auto discovery state. disable 1, enable 2.
Default value is disable(1). | scalar | Enumeration | .1.3.6.1.4.1.2011.2.235.1.1.1.21 |
| productUniqueID The productUniqueID is hex string. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.2011.2.235.1.1.1.22 |
| systemCpuUsage Percent of CPU usage.
The value defined as:
-1: invalid current CPU usage.
[0,100]: represents the current CPU usage. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.2.235.1.1.1.23 |
| systemBootOnce System boot once or permanent. once 1, permanent 2.
Default value is once(1). | scalar | Enumeration | .1.3.6.1.4.1.2011.2.235.1.1.1.24 |
| systemMemUsage Percent of memory usage.
The value defined as:
-1: invalid current memory usage.
[0,100]: represents the current memory usage. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.2.235.1.1.1.25 |
| systemCpuUsageThre Percent of CPU usage threshold.
This value is in [0,100]. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.2.235.1.1.1.26 |
| systemMemUsageThre Percent of memory usage threshold.
This value is in [0,100]. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.2.235.1.1.1.27 |
| systemDiskPartitionUsageThre Percent of hard disk partition usage threshold.
This value is in [0,100]. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.2.235.1.1.1.28 |
| systemTimeZoneStr systemTimeZone information about iBMC time zone.
The value can be time-offset : GMT-12:00~GMT+14:00 e.g. GMT+08:00,GMT-04:30.
The value can be city name , e.g. Asia/Shanghai,Ameri… | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.2011.2.235.1.1.1.29 |
| systemTime systemTime information about iBMC system time, based on UTC.
the value such as (yyyy-mm-dd hh:mm:ss). | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.2011.2.235.1.1.1.3 |
| systemTimeZone systemTimeZone information about iBMC time zone.
The value is in [-720, 840]. | scalar | Integer32 | .1.3.6.1.4.1.2011.2.235.1.1.1.4 |
| safepowerofftime The system safe poweroff time, the value 0 indicates non-timeout. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.2.235.1.1.1.5 |
| systemHealthEventDescriptionTable A table containing the part component. | table | - | .1.3.6.1.4.1.2011.2.235.1.1.1.50 |
| systemDiskPartitionTable A table containing the hard disk partition information. | table | - | .1.3.6.1.4.1.2011.2.235.1.1.1.51 |
| deviceName The device name value between 1 to 63 characters. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.2011.2.235.1.1.1.6 |
| deviceSerialNo The device serial number value between 1 to 63 characters. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.2011.2.235.1.1.1.7 |
| powerOnPolicy 1 - Stay Off
2 - Restore Previous State
3 - Turn On
Default value is turnon(3). | scalar | Enumeration | .1.3.6.1.4.1.2011.2.235.1.1.1.8 |
| hostName The host name between 1 to 64 characters.
Supported characters: 0-9 a-z A-Z - ('-' is not allowed to be the first/last character).
Default value is huawei. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.2011.2.235.1.1.1.9 |