hwRsvpTeIfWindowSize
HUAWEI-RSVPTE-MIB ·
.1.3.6.1.4.1.2011.5.25.148.1.5.1.22
Object
column
SNMPv2-SMIInteger32
Administrators can specify a message window corresponding to the worst case reordering behavior. For example, one might specify that packets reordered within a 32 message window would be accepted. If no reordering can occur, the window is set to one. The maximum value is 64. The default value is 1.
Context
- MIB
- HUAWEI-RSVPTE-MIB
- OID
.1.3.6.1.4.1.2011.5.25.148.1.5.1.22- Type
- column
- Access
- readonly
- Status
- current
- Parent
- hwRsvpTeIfEntry
- Table
- hwRsvpTeIfTable
- Siblings
- 22
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwRsvpTeIfUdpNbrs The number of neighbors perceived to be using
only the RSVP UDP Encapsulation. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.5.25.148.1.5.1.1 |
| hwRsvpTeIfUdpRequired If TRUE, manual configuration forces the use
of UDP encapsulation on the interface. If
FALSE, UDP encapsulation is only used if hwRsvpTeI-
fUdpNbrs is not zero. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.25.148.1.5.1.10 |
| hwRsvpTeIfStatus 'active' on interfaces that are configured for
RSVP. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.5.25.148.1.5.1.11 |
| hwRsvpTeIfHelloEnabled If TRUE, RSVPTE hello is enabled on this
Interface. If FALSE, RSVPTE hello is not
enabled on this interface | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.25.148.1.5.1.12 |
| hwRsvpTeIfSrefreshEnabled If TRUE, srefresh is enabled on this interface.
If FALSE, srefresh is not enabled on this
interface. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.25.148.1.5.1.13 |
| hwRsvpTeIfSrefreshInterval The srefresh interval. I.e. time difference
between 2 refreshes. The default value is 30000. | column | milliseconds SNMPv2-TCTimeInterval | .1.3.6.1.4.1.2011.5.25.148.1.5.1.14 |
| hwRsvpTeIfRetranIncDelta Delta governs the speed with which the sender
increases the retransmission interval. The
ratio of two successive retransmission intervals
is (1 + Delta). | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.148.1.5.1.15 |
| hwRsvpTeIfRetranInterval The retransmission interval. The default value
is 5000. | column | milliseconds SNMPv2-TCTimeInterval | .1.3.6.1.4.1.2011.5.25.148.1.5.1.16 |
| hwRsvpTeIfAuthEnabled If TRUE, authentication is enabled on this
interface. If FALSE, authentication is not
enabled on this interface. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.25.148.1.5.1.17 |
| hwRsvpTeIfAuthEncrypted This states that authentication key is encrypted
or not. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.25.148.1.5.1.18 |
| hwRsvpTeIfAuthHandshake Handshaking is enabled authentications. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.25.148.1.5.1.19 |
| hwRsvpTeIfIpNbrs The number of neighbors perceived to be using
only the RSVP IP Encapsulation. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.5.25.148.1.5.1.2 |
| hwRsvpTeIfAuthLifeTime Authentication life time. The default value is
1800000. | column | milliseconds SNMPv2-TCTimeInterval | .1.3.6.1.4.1.2011.5.25.148.1.5.1.20 |
| hwRsvpTeIfAuthKey Authentication key, used for authentication
processing. For security purposes, a get on
this returns a zero length string. | column | OctetString | .1.3.6.1.4.1.2011.5.25.148.1.5.1.21 |
| hwRsvpTeIfAuthType Authentication type of RSVP-TE interface,
null (1): authentication is not configured.
md5 (2): authentication type is md5.
keychain (3): authentication type is keychain.
The defau… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.148.1.5.1.23 |
| hwRsvpTeIfNbrs The number of neighbors currently perceived;
this will exceed hwRsvpTeIfIpNbrs + hwRsvpTeIfUdpNbrs
by the number of neighbors using both encapsu-
lations. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.5.25.148.1.5.1.3 |
| hwRsvpTeIfRefreshBlockadeMultiple The value of the RSVP value 'Kb', Which is the
minimum number of refresh intervals that
blockade state will last once entered. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.148.1.5.1.4 |
| hwRsvpTeIfRefreshMultiple The value of the RSVP value 'K', which is the
number of refresh intervals which must elapse
(minimum) before a PATH or RESV message which
is not being refreshed will be aged … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.148.1.5.1.5 |
| hwRsvpTeIfTtl The value of SEND_TTL used on this interface
for messages this node originates. If set to
zero, the node determines the TTL via other
means. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.148.1.5.1.6 |
| hwRsvpTeIfRefreshInterval The value of the RSVP value 'R', which is the
minimum period between refresh transmissions of
a given PATH or RESV message on an interface.
The default value is 30000. | column | milliseconds SNMPv2-TCTimeInterval | .1.3.6.1.4.1.2011.5.25.148.1.5.1.7 |
| hwRsvpTeIfRouteDelay The approximate period from the time a route
is changed to the time a resulting message ap-
pears on the interface. The default value is 200. | column | hundredths of a second SNMPv2-TCTimeInterval | .1.3.6.1.4.1.2011.5.25.148.1.5.1.8 |
| hwRsvpTeIfEnabled Its value is always TRUE, if RSVP is enabled
on this Interface. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.25.148.1.5.1.9 |