hwPwCmdVcPeerAddr
HUAWEI-PW-CMD-MIB ·
.1.3.6.1.4.1.2011.5.12.8.1.2.2.1.6
Object
This object contains the value of the peer node address of the PW/PE maintenance protocol entity. This object SHOULD contain a value of all zeros if not applicable (hwPwCmdVcPeerAddrType is 'unknown').
Context
- MIB
- HUAWEI-PW-CMD-MIB
- OID
.1.3.6.1.4.1.2011.5.12.8.1.2.2.1.6- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwPwCmdVcEntry
- Table
- hwPwCmdVcTable
- Siblings
- 29
Syntax
SNMPv2-SMIIpAddress
- Source
- SNMPv2-SMIIpAddress
- Base type
OctetString
Values & Constraints
Type Constraints
range: 4
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwPwCmdVcIndex Index for the conceptual row identifying a PW within
this PW Emulation table. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.12.8.1.2.2.1.1 |
| hwPwCmdVcSwitchSignalProtocol Set by the operator to indicate the protocol responsible
for establishing this PW. The value 'static' is used in all
cases where no maintenance protocol (PW signaling) is used … | column | SignalProtocolType | .1.3.6.1.4.1.2011.5.12.8.1.2.2.1.10 |
| hwPwCmdVcSwitchID Used in the outgoing PW ID field within the 'Virtual
Circuit FEC Element' of the switch pw. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.12.8.1.2.2.1.11 |
| hwPwCmdVcSwitchPeerAddrType Denotes the address type of the peer node of the switch pw.
It should be
set to 'unknown' if PE/PW maintenance protocol is not used
and the address is unknown. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.2011.5.12.8.1.2.2.1.12 |
| hwPwCmdVcSwitchPeerAddr This object contains the value of the peer node address of the
switch pw of the PW/PE maintenance protocol entity. This object
SHOULD contain a value of all zeros if not applica… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.5.12.8.1.2.2.1.13 |
| hwPwCmdVcSwitchInboundLabel The PW label used in the inbound direction (i.e. packets
received from the PSN.
Range: 16-1023
It may be set up manually if owner
is 'manual' or automatically otherwise.
Exa… | column | Unsigned32 | .1.3.6.1.4.1.2011.5.12.8.1.2.2.1.14 |
| hwPwCmdVcSwitchOutboundLabel The PW label used in the outbound direction (i.e. toward
the PSN).
Range: 16-1023
It may be set up manually if owner is 'manual'
or automatically otherwise. Examples: For MPL… | column | Unsigned32 | .1.3.6.1.4.1.2011.5.12.8.1.2.2.1.15 |
| hwPwCmdVcGroupID Used in the Group ID field sent to the peer PWES
within the maintenance protocol used for PW setup.
Applicable if pwVcOwner equal 'pwIdFecSignaling' or
'l2tpControlProtocol',… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.12.8.1.2.2.1.16 |
| hwPwCmdVcIfIndex Index of the interface (or the virtual interface)
associated with the PW. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.2011.5.12.8.1.2.2.1.17 |
| hwPwCmdVcAcStatus Local AC status.
Options:
1. down(1) -indicates AC status down
2. up(2) -indicates AC status up
3. plugout(3) -indicates AC status plugout | column | Enumeration | .1.3.6.1.4.1.2011.5.12.8.1.2.2.1.18 |
| hwPwCmdVcMtu If not equal zero, the optional Mtu object in the
signaling protocol will be sent with this value,
representing the locally supported MTU size over the
interface (or the vir… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.12.8.1.2.2.1.19 |
| hwPwCmdVcSignalProtocol Set by the operator to indicate the protocol responsible
for establishing this PW. The value 'static' is used in all
cases where no maintenance protocol (PW signaling) is used … | column | SignalProtocolType | .1.3.6.1.4.1.2011.5.12.8.1.2.2.1.2 |
| hwPwCmdVcCw If signaling is used for PW establishment, this object
indicates the status of the control word negotiation,
and in both signaling or manual configuration indicates
if CW is… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.12.8.1.2.2.1.20 |
| hwPwCmdVcVCCV Indicates the optional VCCV capabilities of the pw.
Options:
1. ccCw(0)
2. ccAlert(1)
3. ccLabel(2)
4. cvIcmpping(3)
5. cvLspping(4)
6. cvBfd(5) | column | Bits | .1.3.6.1.4.1.2011.5.12.8.1.2.2.1.21 |
| hwPwCmdVcBandwidth Indicates the bandwidth when signaling protocol is rsvp. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.12.8.1.2.2.1.22 |
| hwPwCmdVcMaxAtmCells Indicates the max cell supported when vctype is atm. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.12.8.1.2.2.1.23 |
| hwPwCmdVcTnlPolicyName Indicates the tunnel policy name used. | column | OctetString | .1.3.6.1.4.1.2011.5.12.8.1.2.2.1.24 |
| hwPwCmdVcQoSBehaviorIndex Indicates the traffic behavior Index when QOS is implemented. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.12.8.1.2.2.1.25 |
| hwPwCmdVcExplicitPathName Indicates the explicit path name set by the operator. | column | OctetString | .1.3.6.1.4.1.2011.5.12.8.1.2.2.1.26 |
| hwPwCmdVcTemplateIndex Indicates the pw template index referenced. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.12.8.1.2.2.1.27 |
| hwPwCmdVcSecondary Indicates whether or not the secondary pw is used. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.12.8.1.2.2.1.28 |
| hwPwCmdVcUpTime Specifies the total time this PW status has been
Up(1). | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.2011.5.12.8.1.2.2.1.29 |
| hwPwCmdVcID Used in the outgoing PW ID field within the 'Virtual
Circuit FEC Element'. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.12.8.1.2.2.1.3 |
| hwPwCmdVcRowStatus For creating and modifying this row. None of the
read-create objects in the conceptual rows may be changed
when this object is in the active(1) state. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.5.12.8.1.2.2.1.30 |
| hwPwCmdVcType This value indicate the service to be carried over
this PW. | column | HUAWEI-PW-TC-MIBPwVcType | .1.3.6.1.4.1.2011.5.12.8.1.2.2.1.4 |
| hwPwCmdVcPeerAddrType Denotes the address type of the peer node. It should be
set to 'unknown' if PE/PW maintenance protocol is not used
and the address is unknown. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.2011.5.12.8.1.2.2.1.5 |
| hwPwCmdVcStatus Indicates the status of the PW in the local node. | column | VcStatusType | .1.3.6.1.4.1.2011.5.12.8.1.2.2.1.7 |
| hwPwCmdVcInboundLabel The PW label used in the inbound direction (i.e. packets
received from the PSN.
Range: 16-1023
It may be set up manually if owner is 'manual' or automatically
otherwise.
Exa… | column | Unsigned32 | .1.3.6.1.4.1.2011.5.12.8.1.2.2.1.8 |
| hwPwCmdVcOutboundLabel The PW label used in the outbound direction (i.e. toward
the PSN).
Range: 16-1023
It may be set up manually if owner is 'manual'
or automatically otherwise. Examples: For MPL… | column | Unsigned32 | .1.3.6.1.4.1.2011.5.12.8.1.2.2.1.9 |