hwDslamNacSlaveConfigFailReason
HUAWEI-NAC-MIB ·
.1.3.6.1.4.1.2011.5.117.1.2.1.8
Object
column
Enumeration
Indicates the cause of the failure to configure NAC parameters of the slave port. This node is valid only when the value of hwDslamNacSlaveConfigResult is addfail(4) or delfail(6). This node is read-only. Options: 1. timeout(1) -indicates configuration timeout. 2. vlanconflict(2) -indicates VLAN ID conflict. 3. unknownparameter(3) -indicates unknown parameters. 4. exist(4) -indicates that the configuration already exists. 5. other(5) -indicates other errors or invalid value. 6. notsupportaggregation(6) -indicates the slave node board of this type does not support the scenario in which the master node is a manual aggregation group. 7. invalidipaddress(7) -indicates that the IP address is invalid. For example, the IP network segment conflicts with that of the meth interface of the nac slave node. 8. slavedecryptfail(8) -indicates the slave node fails to decrypt. 9. slavenotsupportsec(9) -indicates the slave node does not support the security mode. 10. sharekeynotexist(10) -indicates the share-key does not exist. 11. setautodeploypolicyfail(11) -indicates that the auto-deployment policy fails to be set. 12. slavenotsupportsnmpv3(12) -indicates that the slave node does not support SNMP v3.
Context
- MIB
- HUAWEI-NAC-MIB
- OID
.1.3.6.1.4.1.2011.5.117.1.2.1.8- Type
- column
- Access
- readonly
- Status
- current
- Parent
- hwDslamNacSlaveInfoEntry
- Table
- hwDslamNacSlaveInfoTable
- Siblings
- 11
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | timeout |
2 | vlanconflict |
3 | unknownparameter |
4 | exist |
5 | other |
6 | notsupportaggregation |
7 | invalidipaddress |
8 | slavedecryptfail |
9 | slavenotsupportsec |
10 | sharekeynotexist |
11 | setautodeploypolicyfail |
12 | slavenotsupportsnmpv3 |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwDslamNacSlaveMac Indicates the MAC address of the NAC slave node.
The returned value 00:00:00:00:00:00 indicates an invalid value.
This node is read-only. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.2011.5.117.1.2.1.1 |
| hwDslamNacSlaveAutoDeployCapability Indicates the auto deployment capability of the slave node.
Options:
1. notsupport(1) -indicates that the slave node does not support auto-deployment.
2. support(2) -indicates t… | column | Enumeration | .1.3.6.1.4.1.2011.5.117.1.2.1.10 |
| hwDslamNacSlaveSnmpV3 Indicates the SNMP v3 capability of the slave node.
Options:
1. notsupport(1) -indicates that the slave node does not support SNMP v3.
2. support(2) -indicates that the slave no… | column | Enumeration | .1.3.6.1.4.1.2011.5.117.1.2.1.11 |
| hwDslamNacSlaveSnmpProfile Indicates the SNMP profile of the slave node.
This node is valid only when hwDslamNacSlaveConfigResult is addok(3).
The invalid value is a null character string. | column | OctetString | .1.3.6.1.4.1.2011.5.117.1.2.1.12 |
| hwDslamNacSlaveType Indicates the device type of the NAC slave node, in the form of a character string.
The returned null character string indicates an invalid value.
This node is read-only. | column | OctetString | .1.3.6.1.4.1.2011.5.117.1.2.1.2 |
| hwDslamNacSlaveIfFrameId Indicates the subrack ID of the slave port on the slave node.
The returned value 255 indicates an invalid value.
This node is read-only. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.117.1.2.1.3 |
| hwDslamNacSlaveIfSlotId Indicates the slot ID of the slave port on the slave node.
The returned value 255 indicates an invalid value.
This node is read-only. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.117.1.2.1.4 |
| hwDslamNacSlaveIfPortId Indicates the port ID of the slave port on the slave node.
The returned value 255 indicates an invalid value.
This node is read-only. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.117.1.2.1.5 |
| hwDslamNacSlaveFindResult Indicates the automatic discovery result of the slave port.
This node is read-only.
Options:
1. notfound(1) -indicates that the slave port is not discovered.
The state of the aut… | column | Enumeration | .1.3.6.1.4.1.2011.5.117.1.2.1.6 |
| hwDslamNacSlaveConfigResult Indicates the neighbor configuration result.
This node is read-only.
Options:
1. none(1) -indicates that the slave node is not configured.
2. configuring(2) -indicates that the… | column | Enumeration | .1.3.6.1.4.1.2011.5.117.1.2.1.7 |
| hwDslamNacSlaveSecurityCapability Indicates the security mode capability of the slave node.
Options:
1. notsupport(1) -indicates the slave node does not support the security mode.
2. support(2) -indicates the sl… | column | Enumeration | .1.3.6.1.4.1.2011.5.117.1.2.1.9 |