hwMstpiStpDefaultPortCost

HUAWEI-MSTP-MIB · .1.3.6.1.4.1.2011.5.25.42.4.1.20.1.22
MIB view Table view

Object

column r/w Enumeration 
The value of this object identifies the default cost of the port.
1: reset When you perform SET operation to this object, the value can be reset only.
2: unused When you perform GET operation to this object, the value of this object is unused.
By default, the path cost value of the port on each MSTI is the path cost corresponding to the port rate.

Context

MIB
HUAWEI-MSTP-MIB
OID
.1.3.6.1.4.1.2011.5.25.42.4.1.20.1.22
Type
column
Access
readwrite
Status
current
Parent
hwMstpPortEntry
Table
hwMstpPortTable
Siblings
30

Syntax

Enumeration

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hwMstpiPortIndex
The index of the bridge port.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.5.25.42.4.1.20.1.1
hwMstpiStpPortPointToPoint
The value of this object identifies whether the port is a Point-to-Point port. 1: forceTrue 2: forceFalse 3: auto The default value is auto.
columnEnumeration.1.3.6.1.4.1.2011.5.25.42.4.1.20.1.10
hwMstpiStpMcheck
The value of this object identifies the operation of MCHECK on the port. 1: enable When you set this object, the value can be enable only. 2: unused When you access the value of t…
columnEnumeration.1.3.6.1.4.1.2011.5.25.42.4.1.20.1.11
hwMstpiStpTransLimit
The value of this object identifies the transmission times of the BPDUs on the port.
columnInteger32.1.3.6.1.4.1.2011.5.25.42.4.1.20.1.12
hwMstpiStpRXStpBPDU
The number of received Config BPDU. Effective in CIST.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.5.25.42.4.1.20.1.13
hwMstpiStpTXStpBPDU
The number of transmitted Config BPDU. Effective in CIST.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.5.25.42.4.1.20.1.14
hwMstpiStpRXTCNBPDU
The number of received TCN BPDU. Effective in CIST.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.5.25.42.4.1.20.1.15
hwMstpiStpTXTCNBPDU
The number of transmitted TCN BPDU. Effective in CIST.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.5.25.42.4.1.20.1.16
hwMstpiStpRXRSTPBPDU
The number of received RST BPDU. Effective in CIST.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.5.25.42.4.1.20.1.17
hwMstpiStpTXRSTPBPDU
The number of transmitted RST BPDU. Effective in CIST.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.5.25.42.4.1.20.1.18
hwMstpiStpRXMSTPBPDU
The number of received MST BPDU. Effective in CIST.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.5.25.42.4.1.20.1.19
hwMstpiState
The current state of the port. It must be disabled, discarding, learning or forwarding.
columnEnumeration.1.3.6.1.4.1.2011.5.25.42.4.1.20.1.2
hwMstpiStpTXMSTPBPDU
The number of transmitted MST BPDU. Effective in CIST.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.5.25.42.4.1.20.1.20
hwMstpiStpClearStatistics
The value of this object identifies the status of clearing statistics on the port. 1: clear When you perform SET operation to this object, the value can be clear only. 2: unused W…
columnEnumeration.1.3.6.1.4.1.2011.5.25.42.4.1.20.1.21
hwMstpiStpStatus
The value of this object identifies the spanning tree status on the port. 1: enable 2: disable The default value is enable.
columnHwMSTPEnabledStatus.1.3.6.1.4.1.2011.5.25.42.4.1.20.1.23
hwMstpiPortRootGuard
The value of this object identifies whether the root protection is enabled on the port. 1: enable 2: disable By default, the root protection is disabled.
columnHwMSTPEnabledStatus.1.3.6.1.4.1.2011.5.25.42.4.1.20.1.24
hwMstpiPortLoopGuard
The value of this object identifies whether the loopback protection is enabled on the port. 1: enable 2: disable By default, the loopback protection is disabled.
columnHwMSTPEnabledStatus.1.3.6.1.4.1.2011.5.25.42.4.1.20.1.25
hwMstpPortCompliance
The value of this object identifies the protocol format of the MSTP packet sent and received on the port. The protocol format can be one of the following: 1: auto (the self-adapt…
columnEnumeration.1.3.6.1.4.1.2011.5.25.42.4.1.20.1.26
hwMstpConfigDigestSnooping
This object indicates whether the digest snooping function is enabled on the port: 1: enabled 2: disabled By default, the function is not enabled. In other words, the default valu…
columnHwMSTPEnabledStatus.1.3.6.1.4.1.2011.5.25.42.4.1.20.1.27
hwMstpiPortPriority
The value of the priority field which is contained in the first (in network byte order) four bits of the (2 octet long) Port ID. The other octet of the Port ID is given by the …
columnInteger32.1.3.6.1.4.1.2011.5.25.42.4.1.20.1.3
hwMstpNoAgreementCheck
Whether enhance agreement is enabled. When Huawei datacomm devices are internetworking with non-Huawei devices, you need to enable this on Huawei devices to configure the mode …
columnHwMSTPEnabledStatus.1.3.6.1.4.1.2011.5.25.42.4.1.20.1.30
hwMstpPortTCNotify
The main interface notifies its sub-interfaces to update MAC entries and ARP entries after receiving a TC message. This prevents services from being interrupted.
columnHwMSTPEnabledStatus.1.3.6.1.4.1.2011.5.25.42.4.1.20.1.31
hwMstpiStpPortBpduFilter
This object indicates whether the port is enabled to send or receive BPDUs. disable(1): indicates that the function of sending or receiving BPDUs is in the disabled state on the p…
columnEnumeration.1.3.6.1.4.1.2011.5.25.42.4.1.20.1.32
hwMstpiPortRole
Indicates the port role on a particular instance.
columnEnumeration.1.3.6.1.4.1.2011.5.25.42.4.1.20.1.33
hwMstpiPathCost
The value of this object identifies the path cost of the port.
columnInteger32.1.3.6.1.4.1.2011.5.25.42.4.1.20.1.4
hwMstpiDesignatedRoot
The Bridge Identifier of the Root Bridge for the port of the Spanning Tree instance identified by the MSTID
columnBRIDGE-MIBBridgeId.1.3.6.1.4.1.2011.5.25.42.4.1.20.1.5
hwMstpiDesignatedCost
The value of this object identifies the path cost of the designated port.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.5.25.42.4.1.20.1.6
hwMstpiDesignatedBridge
The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment.
columnBRIDGE-MIBBridgeId.1.3.6.1.4.1.2011.5.25.42.4.1.20.1.7
hwMstpiDesignatedPort
The port Identifier of the port on the Designated Bridge for this port's segment.
columnOctetString.1.3.6.1.4.1.2011.5.25.42.4.1.20.1.8
hwMstpiStpPortEdgeport
This object indicates whether the port is an edge port. By default, a port is a non-edge port. The value can be changed through configuration. disable: indicates an edge port in…
columnEnumeration.1.3.6.1.4.1.2011.5.25.42.4.1.20.1.9