hwMstpProPortDesignatedCost

HUAWEI-MSTP-MIB · .1.3.6.1.4.1.2011.5.25.42.4.1.25.1.6
MIB view Table view

Object

column SNMPv2-SMIInteger32 
The path cost of the designated port of the segment connected to 
this port. This value is compared to the Root Path Cost field 
in received bridge BPDUs.

Context

MIB
HUAWEI-MSTP-MIB
OID
.1.3.6.1.4.1.2011.5.25.42.4.1.25.1.6
Type
column
Access
readonly
Status
current
Parent
hwMstpProPortEntry
Table
hwMstpProPortTable
Siblings
28

Syntax

SNMPv2-SMIInteger32
Source
SNMPv2-SMIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hwMstpProPortStpPointToPoint
Whether the port connects the point to point link. If user set the port as a point to point port, the port is a point to point port in the MSTP process. If user set the port as a …
columnEnumeration.1.3.6.1.4.1.2011.5.25.42.4.1.25.1.10
hwMstpProPortStpMcheck
When root interface is changed from STP mode to RSTP or MSTP mode, the appointed interface can not switch to RSTP or MSTP mode automatically. At the time, you need switch back w…
columnEnumeration.1.3.6.1.4.1.2011.5.25.42.4.1.25.1.11
hwMstpProPortStpTransLimit
The value used by the port transmit state machine to limit the maximum transmission rate.
columnInteger32.1.3.6.1.4.1.2011.5.25.42.4.1.25.1.12
hwMstpProPortStpRXStpBPDU
The number of received Config BPDUs.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.5.25.42.4.1.25.1.13
hwMstpProPortStpTXStpBPDU
The number of transmitted Config BPDUs.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.5.25.42.4.1.25.1.14
hwMstpProPortStpRXTCNBPDU
The number of received TCN BPDUs.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.5.25.42.4.1.25.1.15
hwMstpProPortStpTXTCNBPDU
The number of transmitted TCN BPDUs.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.5.25.42.4.1.25.1.16
hwMstpProPortStpRXRSTPBPDU
The number of received RST BPDUs.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.5.25.42.4.1.25.1.17
hwMstpProPortStpTXRSTPBPDU
The number of transmitted RST BPDUs.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.5.25.42.4.1.25.1.18
hwMstpProPortStpRXMSTPBPDU
The number of received MST BPDUs.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.5.25.42.4.1.25.1.19
hwMstpProPortState
The current state of the port in MSTP process. It must be disabled, discarding, learning or forwarding.
columnEnumeration.1.3.6.1.4.1.2011.5.25.42.4.1.25.1.2
hwMstpProPortStpTXMSTPBPDU
The number of transmitted MST BPDUs.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.5.25.42.4.1.25.1.20
hwMstpProPortStpClearStatistics
Clear the Spanning Tree statistics in specified MSTP process. The value is unused(65535) when it is read. The value must be clear(1) when it is set.
columnEnumeration.1.3.6.1.4.1.2011.5.25.42.4.1.25.1.21
hwMstpProPortStpDefaultPortCost
Set default port path cost.
columnEnumeration.1.3.6.1.4.1.2011.5.25.42.4.1.25.1.22
hwMstpProPortStpStatus
Whether the Spanning Tree Protocol is enabled on this port.
columnHwMSTPEnabledStatus.1.3.6.1.4.1.2011.5.25.42.4.1.25.1.23
hwMstpProPortRootGuard
Whether the root guard is enabled. The function is to prevent the port from receiving the BPDUs, the priority of which is above the priority of the port.
columnHwMSTPEnabledStatus.1.3.6.1.4.1.2011.5.25.42.4.1.25.1.24
hwMstpProPortLoopGuard
Whether the loop protection is enabled.
columnHwMSTPEnabledStatus.1.3.6.1.4.1.2011.5.25.42.4.1.25.1.25
hwMstpProPortCompliance
The value of this object identifies the protocol format of the MSTP packet sent and received on the port. The protocol format can be one of the following: 1: auto (the self-adapt…
columnEnumeration.1.3.6.1.4.1.2011.5.25.42.4.1.25.1.26
hwMstpProPortConfigDigestSnooping
This object indicates whether the digest snooping function is enabled on the port: 1: enabled 2: disabled By default, the function is not enabled. In other words, the default valu…
columnHwMSTPEnabledStatus.1.3.6.1.4.1.2011.5.25.42.4.1.25.1.27
hwMstpProPortPriority
The value of the priority field which is contained in the first (in network byte order) four bits of the (2 octet long) Port ID. The other octet of the Port ID is given by the …
columnInteger32.1.3.6.1.4.1.2011.5.25.42.4.1.25.1.3
hwMstpProPortNoAgreementCheck
Whether enhance agreement is enabled. When Huawei datacomm devices are internetworking with non-Huawei devices, you need to enable this on Huawei devices to configure the mode …
columnHwMSTPEnabledStatus.1.3.6.1.4.1.2011.5.25.42.4.1.25.1.30
hwMstpProPortTCNotify
The main interface notifies its sub-interfaces to update MAC entries and ARP entries after receiving a TC message. This prevents services from being interrupted.
columnHwMSTPEnabledStatus.1.3.6.1.4.1.2011.5.25.42.4.1.25.1.31
hwMstpProPortType
An interface to participate in the status calculation of link-share or no-link-share Spanning Tree processes.
columnEnumeration.1.3.6.1.4.1.2011.5.25.42.4.1.25.1.32
hwMstpProPortPathCost
The path cost of paths with which the package passes the port. The range of path cost is 1..65535 for 802.1d standard, is 1..200000000 for 802.1t standard, and is 1..200000 for …
columnInteger32.1.3.6.1.4.1.2011.5.25.42.4.1.25.1.4
hwMstpProPortDesignatedRoot
The Bridge Identifier of the Root Bridge for the port of the MSTP process Spanning Tree.
columnBRIDGE-MIBBridgeId.1.3.6.1.4.1.2011.5.25.42.4.1.25.1.5
hwMstpProPortDesignatedBridge
The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment.
columnBRIDGE-MIBBridgeId.1.3.6.1.4.1.2011.5.25.42.4.1.25.1.7
hwMstpProPortDesignatedPort
The Port Identifier of the port on the Designated Bridge for this port's segment.
columnOctetString.1.3.6.1.4.1.2011.5.25.42.4.1.25.1.8
hwMstpProPortStpEdgeport
Whether the port fast is enabled in the MSTP process. When the port is the edge port, it can change to forwarding state immediately.
columnHwMSTPEnabledStatus.1.3.6.1.4.1.2011.5.25.42.4.1.25.1.9