hwdot1dStpOperPortPointToPoint
HUAWEI-LswRSTP-MIB ·
.1.3.6.1.4.1.2011.2.23.1.6.1.5.1.19
Object
column
Enumeration
This object indicates whether the port
has connected to a point-to-point link or not.
The administrative value should be read from hwdot1dStpPortPointToPoint.
Context
- MIB
- HUAWEI-LswRSTP-MIB
- OID
.1.3.6.1.4.1.2011.2.23.1.6.1.5.1.19- Type
- column
- Access
- readonly
- Status
- current
- Parent
- hwdot1dStpPortXEntry
- Table
- hwdot1dStpPortXTable
- Siblings
- 18
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwdot1dStpPortStatus RSTP status of the port | column | EnabledStatus | .1.3.6.1.4.1.2011.2.23.1.6.1.5.1.1 |
| hwdot1dStpRXRSTPBPDU Number of RSTP BPDU received | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.2.23.1.6.1.5.1.10 |
| hwdot1dStpTXRSTPBPDU Number of RSTP BPDU transmitted | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.2.23.1.6.1.5.1.11 |
| hwdot1dStpClearStatistics Clear RSTP statistics. Read operation not supported. | column | Enumeration | .1.3.6.1.4.1.2011.2.23.1.6.1.5.1.12 |
| hwdot1dSetStpDefaultPortCost Set PathCost back to the default setting. Read operation not supported. | column | Enumeration | .1.3.6.1.4.1.2011.2.23.1.6.1.5.1.13 |
| hwdot1dStpRootGuard If the port guard root bridge. Other bridge which want to be root can not become root through this port if enabled. | column | EnabledStatus | .1.3.6.1.4.1.2011.2.23.1.6.1.5.1.14 |
| hwdot1dStpLoopGuard Loop guard function that keep a root port or an alternate port in discarding state while the information on the port is aged out. | column | EnabledStatus | .1.3.6.1.4.1.2011.2.23.1.6.1.5.1.15 |
| hwdot1dStpPortBlockedReason Record the block reason of the port.
notBlock (1) means that the port is not in block state,.
blockForProtocol (2) means that the port is blocked by stp protocol to avoid … | column | Enumeration | .1.3.6.1.4.1.2011.2.23.1.6.1.5.1.16 |
| hwdot1dStpRXTCBPDU The number of received TC BPDUs | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.2.23.1.6.1.5.1.17 |
| hwdot1dStpPortSendingBPDUType Type of BPDU which the port is sending. | column | Enumeration | .1.3.6.1.4.1.2011.2.23.1.6.1.5.1.18 |
| hwdot1dStpPortEdgeport Whether the port can be an edge port | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.2.23.1.6.1.5.1.2 |
| hwdot1dStpPortPointToPoint It is the administrative value indicates whether the port
can be connected to a point-to-point link or not.
If the value is 'auto', the operative value of a point-t… | column | Enumeration | .1.3.6.1.4.1.2011.2.23.1.6.1.5.1.3 |
| hwdot1dStpMcheck Check if the port transfer state machine enters | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.2.23.1.6.1.5.1.4 |
| hwdot1dStpTransLimit Packet transmission limit of the bridge in a duration of Hello Time. | column | Integer32 | .1.3.6.1.4.1.2011.2.23.1.6.1.5.1.5 |
| hwdot1dStpRXStpBPDU Number of STP BPDU received | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.2.23.1.6.1.5.1.6 |
| hwdot1dStpTXStpBPDU Number of STP BPDU transmitted | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.2.23.1.6.1.5.1.7 |
| hwdot1dStpRXTCNBPDU Number of TCN BPDU received | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.2.23.1.6.1.5.1.8 |
| hwdot1dStpTXTCNBPDU Number of TCN BPDU transmitted | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.2.23.1.6.1.5.1.9 |