hwStatusCollect
HUAWEI-LOAD-BACKUP-MIB ·
.1.3.6.1.4.1.2011.6.6.5
Object
node
No description available.
Context
- MIB
- HUAWEI-LOAD-BACKUP-MIB
- OID
.1.3.6.1.4.1.2011.6.6.5- Type
- node
- Parent
- hwLoadBackup
- Siblings
- 9
- Children
- 8
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwLoadBackupMon | node | - | .1.3.6.1.4.1.2011.6.6.1 |
| hwIoLoadSmartTable Through this table,
you can query and config the board, after the board is configured, the board software is
loaded when load smart whether the board is configed or not. | table | - | .1.3.6.1.4.1.2011.6.6.10 |
| hwPatch | node | - | .1.3.6.1.4.1.2011.6.6.2 |
| hwBackupDataToServer | node | - | .1.3.6.1.4.1.2011.6.6.3 |
| hwOperationInfo | node | - | .1.3.6.1.4.1.2011.6.6.4 |
| hwLoadPara | node | - | .1.3.6.1.4.1.2011.6.6.6 |
| hwLoadBackupTrapsVbOids | node | - | .1.3.6.1.4.1.2011.6.6.7 |
| hwLoadBackupTraps | node | - | .1.3.6.1.4.1.2011.6.6.8 |
| hwProgramAndDataInfoTable Program and data information table. Through this table,
you can query the status and version of program and data in active board or standby board .
The index of this table is hwMa… | table | - | .1.3.6.1.4.1.2011.6.6.9 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwStatusInfoTable The table contains all collectable status information in the system.
The index of this table is hwStatusID. The index value is the status ID.
The table can only be queried. It can… | table | - | .1.3.6.1.4.1.2011.6.6.5.1 |
| hwStatusCollectIndicate Start to collect status or stop collecting status.
Options:
1. start(1) -Collecting status starts.
2. stop(2) -Collecting status stops. | scalar | Enumeration | .1.3.6.1.4.1.2011.6.6.5.2 |
| hwStatusCollectMask Collecting status mask.
Options:
1.cpu(0) -indicates that the CPU usage of the control board.
2.board(1) -indicates that the running status of the bo… | scalar | Bits | .1.3.6.1.4.1.2011.6.6.5.3 |
| hwStatusCollectType Collecting type.
Options:
1.fault(1) -Collecting system fault status information.
2.all(2) -Collecting all the system information.
When the collection start command is sent, the… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.6.5.4 |
| hwStatusCollectProgress The progress of collecting the device status information about the object can be queried
at the specified time.
If the health diagnosis has not started, the displayed collection p… | scalar | Integer32 | .1.3.6.1.4.1.2011.6.6.5.5 |
| hwStatusCollectResult After the collection of the status information about an object is complete, the collection result can be queried.
If the health diagnosis has not started, or the health diagnosis … | scalar | OctetString | .1.3.6.1.4.1.2011.6.6.5.6 |
| hwStatusCollectResultSize The size of the Collecting result, unit is byte. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.6.5.7 |
| hwStatusCollectReady Ready status for health diagnosis.
Options:
1.ready(1) -The device is ready and health diagnosis can start.
2.notReady(2) -The device is not ready and health diagnosis cannot s… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.6.5.8 |