hwBackupMode
HUAWEI-LOAD-BACKUP-MIB ·
.1.3.6.1.4.1.2011.6.6.1.2.1.2
Object
column
r/w
Enumeration
Load protocol.
Options:
1.tftp(1) -indicates that the backup is performed by using TFTP through the
network port. Select tftp(1) when the transmission mode of the server is
configured to TFTP.When TFTP is used in the backup, you need not enter the
user name and password.
2.modem(2) -indicates that the backup is performed by using the Xmodem serial
port protocol through the serial port. When you use the HyperTerminal of
the OS to configure the serial port on the server, select modem(2).
Loading through the serial port does not require networking and maintenance
through the command line interface does not require NM software.
3.ftp(3) -indicates that the backup is performed by using FTP through the network
port. Select ftp when the transmission mode of the server is configured to FTP.
When FTP is used for file backup, you need to enter the user name and password.
4.sftp(5) -indicates that the backup is performed by using SFTP through the network port.
Select sftp(5) when the transmission mode of the server is configured to SFTP.
When SFTP is used for file backup, the instructions and data are encrypted
during transmission.
5.other(6) -other.
The SFTP transmission mode is recommended.
Context
- MIB
- HUAWEI-LOAD-BACKUP-MIB
- OID
.1.3.6.1.4.1.2011.6.6.1.2.1.2- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwBackupParaEntry
- Table
- hwBackupParaTable
- Siblings
- 15
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | tftp |
2 | modem |
3 | ftp |
5 | sftp |
6 | other |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwBackupServerIpAddr The IP address of file server. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.6.6.1.2.1.1 |
| hwBackupServerPort SFTP server listen port.
Range: 0-65535
Default: 22
The invalid value is 65535. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.6.1.2.1.10 |
| hwBackupPositionPara Auxiliary parameters for locating a board to be backed up.
When a file is backed up to the EMU, the value of this parameter is emuID.
When a file is backed up to a modem or an ONT… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.6.1.2.1.11 |
| hwBackupExtServerInetAddressType The type of address in hwBackupExtServerIPAddress. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.2011.6.6.1.2.1.12 |
| hwBackupExtServerIPAddress The IPv4, IPv6 or DNS address of BACKUP Server. Note that,
since this is an index to the table, the DNS name must be
short enough to fit into the maximum length of indices allowed… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.2011.6.6.1.2.1.13 |
| hwBackupResouce The backup resource. | column | OctetString | .1.3.6.1.4.1.2011.6.6.1.2.1.14 |
| hwBackupPrivatePara Proprietary parameter carried during file backup. The parameter is related to the contents of the backup file.
The backup file is Vdsl2 xlin. The proprietary parameter is the vict… | column | OctetString | .1.3.6.1.4.1.2011.6.6.1.2.1.15 |
| hwBackupVsID The ID of the virtual system to be backed up.
Range: 0-8 | column | Integer32 | .1.3.6.1.4.1.2011.6.6.1.2.1.16 |
| hwBackupFileName The name of backup file. | column | OctetString | .1.3.6.1.4.1.2011.6.6.1.2.1.3 |
| hwBackupContent Type of the backup file.
Options:
1.nobackupcontent(-1) -no file.
2.database(1) -database file.
3.shellMacro(2) -shell macro file… | column | Enumeration | .1.3.6.1.4.1.2011.6.6.1.2.1.4 |
| hwBackupProcess Backup progress. | column | Integer32 | .1.3.6.1.4.1.2011.6.6.1.2.1.5 |
| hwBackupUserName The backup user name, which is required in FTP mode and SFTP mode
but is not required in TFTP mode. | column | OctetString | .1.3.6.1.4.1.2011.6.6.1.2.1.6 |
| hwBackupPassword The backup user password, which is required in FTP mode and SFTP mode
but is not required in TFTP mode. | column | OctetString | .1.3.6.1.4.1.2011.6.6.1.2.1.7 |
| hwBackupBoardType The type of the board to be backed up, which is defined in HUAWEI-TC-MIB.mib. | column | HUAWEI-TC-MIBHWPCBType | .1.3.6.1.4.1.2011.6.6.1.2.1.8 |
| hwBackupRequestID The backup request ID, which identifies a backup request delivered by the NMS.
According to the ID, you can query hwOperationInfoTable to obtain
the status and results of each bac… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.6.1.2.1.9 |