hwSubIfVlanPolicyValue
HUAWEI-L3VLAN-MIB ·
.1.3.6.1.4.1.2011.5.25.100.1.3.1.6
Object
column
r/w
OctetString
Indicates the information of vlan policy as follows: Each octet within this value specifies a set of eight priorities. When the policy type is 8021p, the first octet specifying 8021p priority 0 through 7; When the policy type is dscp, the first octet specifying dscp priority 0 through 7, the second octet specifying priority 8 through 15, etc; When the policy type is eth-type, the most significant bit of the first octet specifying EtherType PPPOE. Within each octet, the most significant bit represents the lowest numbered priority, and the least significant bit represents the highest numbered priority. Thus, each priority is represented by a single bit within the value of this object. If that bit has a value of '1' then that priority is included in the set of priorities; the priority is not included if its bit has a value of '0'.
Context
- MIB
- HUAWEI-L3VLAN-MIB
- OID
.1.3.6.1.4.1.2011.5.25.100.1.3.1.6- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwSubIfVlanPolicyEntry
- Table
- hwSubIfVlanPolicyTable
- Siblings
- 7
Syntax
OctetString
Values & Constraints
Object Constraints
range: 8-8
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwSubIfVlanPolicyIfIndex Interface index(es) of port(s) present on the device. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.2011.5.25.100.1.3.1.1 |
| hwSubIfVlanPolicyVlanId This object specifies the vlan id encapsulated by the sub-interface.
when the vlan id is zero it means to configure the interface as the untagged sub-interface, When configure vl… | column | Integer32 | .1.3.6.1.4.1.2011.5.25.100.1.3.1.2 |
| hwSubIfVlanPolicyIfType Indicates the sub-interface type as follows:
dot1q(1): indicates vlan-type dot1q sub-interface.
dot1qTerm(2): indicates dot1q termination sub-interface.
stacking(3): ind… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.100.1.3.1.3 |
| hwSubIfVlanPolicyVlanIdEnd When configure vlan as a range, hwSubIfVlanPolicyVlanId is the start vlan id and hwSubIfVlanPolicyVlanIdEnd is the end vlan id. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.100.1.3.1.4 |
| hwSubIfVlanPolicyType Indicates the type of vlan policy as follows:
8021p(1): indicates IEEE 802.1P encapsulation.
dscp(2): indicates Differentiated Services CodePoint.
eth-type(3): indicates… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.100.1.3.1.5 |
| hwSubIfVlanPolicyRowStatus This object specifies the status of the sub-interface vlan table. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.5.25.100.1.3.1.51 |
| hwSubIfVlanPolicyGroupId Group-management id. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.100.1.3.1.7 |