hwMldFwdPortType
HUAWEI-L2MULTICAST-MIB ·
.1.3.6.1.4.1.2011.5.25.181.1.4.2.1.5
Object
column
HWPortType
The interface type: 1: Invalid 2: PW interface 3: L2 interface 4: Encapsulation sub-interface 5: Termination sub-interface 6: Interface Board 7: Vlanif Port 11: Main-interface-bound-to-vsi
Context
- MIB
- HUAWEI-L2MULTICAST-MIB
- OID
.1.3.6.1.4.1.2011.5.25.181.1.4.2.1.5- Type
- column
- Access
- readonly
- Status
- current
- Parent
- hwMldFwdEntry
- Table
- hwMldFwdTable
- Siblings
- 14
Syntax
HWPortType
- Source
- HWPortType
- Base type
Enumeration
Values & Constraints
Type Values
1 | invalid |
2 | pw |
3 | switchport |
4 | dot1q |
5 | termination |
6 | board |
7 | vlanPort |
9 | qinq-batch-config |
10 | dot1q-termination-batch-config |
11 | main-interface-bound-to-vsi |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwMldFwdVlanIndex The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095.
The value ranges from 1 to 4095. | column | Q-BRIDGE-MIBVlanIdOrAny | .1.3.6.1.4.1.2011.5.25.181.1.4.2.1.1 |
| hwMldFwdVcOrSiteId The VC ID or SITE ID of a PW interface. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.181.1.4.2.1.10 |
| hwMldFwdAddressType The address type of an entry:
1: IP
2: MAC
The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.181.1.4.2.1.11 |
| hwMldFwdHostFlag1 The mode to create an interface on the host:
1: static
2: dynamic
3: static and dynamic
4: invalid | column | Enumeration | .1.3.6.1.4.1.2011.5.25.181.1.4.2.1.12 |
| hwMldFwdHostFlag2 Whether an interface on the host is created through SSM-mapping:
1: non-mapping
2: mapping | column | Enumeration | .1.3.6.1.4.1.2011.5.25.181.1.4.2.1.13 |
| hwMldFwdHostFlag3 The type of an interface created on a router:
1: Interface connected to the host
2: Router interface that replicates multicast data flows | column | Enumeration | .1.3.6.1.4.1.2011.5.25.181.1.4.2.1.14 |
| hwMldFwdHostFlag4 Indicates (S, G) table created :
1: from port;
2: from static;
3: from both
the default value is 1 | column | Enumeration | .1.3.6.1.4.1.2011.5.25.181.1.4.2.1.15 |
| hwMldFwdVsiName The name of a VSI. If a VLAN is specified, the value is 32. | column | OctetString | .1.3.6.1.4.1.2011.5.25.181.1.4.2.1.2 |
| hwMldFwdGroupAddress The group address of a multicast group. In the case of MAC forwarding, the group address is the smallest of 32 IP addresses. | column | IPV6-TCIpv6Address | .1.3.6.1.4.1.2011.5.25.181.1.4.2.1.3 |
| hwMldFwdSourceAddress The source IP address of a multicast group. | column | IPV6-TCIpv6Address | .1.3.6.1.4.1.2011.5.25.181.1.4.2.1.4 |
| hwMldFwdPortIfIndex The interface index. The value 0 indicates that the interface index is invalid. | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.2011.5.25.181.1.4.2.1.6 |
| hwMldFwdPortPeId The PE VID of an interface.
The value ranges from 1 to 4095.
The value 4095 indicates that the PE VID is invalid. | column | Q-BRIDGE-MIBVlanIdOrAny | .1.3.6.1.4.1.2011.5.25.181.1.4.2.1.7 |
| hwMldFwdPortCeId The CE VID of an interface.
The value ranges from 1 to 4095.
The value 4095 indicates that the CE VID is invalid. | column | Q-BRIDGE-MIBVlanIdOrAny | .1.3.6.1.4.1.2011.5.25.181.1.4.2.1.8 |
| hwMldFwdPeerAddress The peer IP address of a PW interface. The value 0.0.0.0 indicates that the IP address is invalid. | column | IPV6-TCIpv6Address | .1.3.6.1.4.1.2011.5.25.181.1.4.2.1.9 |