hwCACPortLimitMaxEntry
HUAWEI-L2MULTICAST-MIB ·
.1.3.6.1.4.1.2011.5.25.181.1.31.1.1.13
Object
column
r/w
Integer32
The maximum number of forwarding entries. The value 0 indicates that the number is invalid.
Context
- MIB
- HUAWEI-L2MULTICAST-MIB
- OID
.1.3.6.1.4.1.2011.5.25.181.1.31.1.1.13- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwL2mcCACPortLimitEntry
- Table
- hwL2mcCACPortLimitTable
- Siblings
- 16
Syntax
Integer32
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwCACPortLimitVlanIndex The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095.
The value ranges from 1 to 4095. | column | Q-BRIDGE-MIBVlanIdOrAny | .1.3.6.1.4.1.2011.5.25.181.1.31.1.1.1 |
| hwCACPortLimitVcOrSiteId The VC ID or SITE ID of a PW interface. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.181.1.31.1.1.10 |
| hwCACPortLimitCfgRowStatus The row status. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.5.25.181.1.31.1.1.100 |
| hwCACPortLimitChnlName The channel name. | column | OctetString | .1.3.6.1.4.1.2011.5.25.181.1.31.1.1.11 |
| hwCACPortLimitAcl The number of ACL for the multicast groups that do not need to be configured with CAC limit.
The ACL number ranges from 2000 to 3999.
The default value is 0, indicating that the n… | column | Integer32 | .1.3.6.1.4.1.2011.5.25.181.1.31.1.1.12 |
| hwCACPortLimitEntryCnt The number of current forwarding entries. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.5.25.181.1.31.1.1.14 |
| hwCACPortLimitMaxBandWidth The maximum bandwidth. The value 0 indicates that the bandwidth is invalid. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.181.1.31.1.1.15 |
| hwCACPortLimitBandWidth The current bandwidth. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.5.25.181.1.31.1.1.16 |
| hwCACPortLimitVsiName The name of a VSI. If a VLAN is specified, the value is 32. | column | OctetString | .1.3.6.1.4.1.2011.5.25.181.1.31.1.1.2 |
| hwCACPortLimitPortType The interface type:
1: Invalid
2: PW interface
3: L2 interface
4: Encapsulation sub-interface
5: Termination sub-interface
6: Interface Board
7: Vlanif Port
11: Main-interface-bou… | column | HWPortType | .1.3.6.1.4.1.2011.5.25.181.1.31.1.1.3 |
| hwCACPortLimitIfIndex The interface index. The value 0 indicates that the interface index is invalid. | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.2011.5.25.181.1.31.1.1.4 |
| hwCACPortLimitPeId The begin of a PE VID batch.
The value ranges from 1 to 4095.
The value 4095 indicates that the PE VID is invalid. | column | Q-BRIDGE-MIBVlanIdOrAny | .1.3.6.1.4.1.2011.5.25.181.1.31.1.1.5 |
| hwCACPortLimitPeIdEnd The end of a PE VID batch.
The value ranges from 1 to 4095.
The value 4095 indicates that the PE VID is invalid. | column | Q-BRIDGE-MIBVlanIdOrAny | .1.3.6.1.4.1.2011.5.25.181.1.31.1.1.6 |
| hwCACPortLimitCeId The begin of a CE VID batch.
The value ranges from 1 to 4095.
The value 4095 indicates that the PE VID is invalid. | column | Q-BRIDGE-MIBVlanIdOrAny | .1.3.6.1.4.1.2011.5.25.181.1.31.1.1.7 |
| hwCACPortLimitCeIdEnd The end of a CE VID batch.
The value ranges from 1 to 4095.
The value 4095 indicates that the PE VID is invalid. | column | Q-BRIDGE-MIBVlanIdOrAny | .1.3.6.1.4.1.2011.5.25.181.1.31.1.1.8 |
| hwCACPortLimitPeerAddress The peer IP address of a PW interface. The value 0.0.0.0 indicates that the IP address is invalid. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.5.25.181.1.31.1.1.9 |
Notification Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwL2mcNotificationsAddressType The address type of the multicast group and source address. If this object is set to
unknown(0) indicates that the multicast group and source address is invalid. | scalar | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.2011.5.25.181.1.33.10 |
| hwL2mcNotificationsExceedType The limit type:
1:BD bridge domain;
2:VLAN Virtual Local Area Network;
3:VSI Virtual Switch Instance | scalar | Enumeration | .1.3.6.1.4.1.2011.5.25.181.1.33.19 |
| hwL2mcNotificationsExceedCurrent The value of the current number. | scalar | Unsigned32 | .1.3.6.1.4.1.2011.5.25.181.1.33.16 |
| hwL2mcNotificationsExceedLimit Limit value. | scalar | Unsigned32 | .1.3.6.1.4.1.2011.5.25.181.1.33.11 |
| hwL2mcNotificationsExceedThreshold The value of the threshold. | scalar | Unsigned32 | .1.3.6.1.4.1.2011.5.25.181.1.33.17 |
| hwL2mcNotificationReason The reason for trap sending:
1:new leave is received;
2:configuration is changed;
100:Alarm Clear | scalar | Enumeration | .1.3.6.1.4.1.2011.5.25.181.1.33.18 |