hwIsisProcDomainAuthPacketAuthMode
HUAWEI-ISIS-CONF-MIB ·
.1.3.6.1.4.1.2011.5.25.24.2.1.1.1.10
Object
column
r/w
Enumeration
The value of this object identifies the packet authentication mode of IS-IS route domain authentication. none (0): Authentication mode is not configured. authenticateall (1): Encapsulates authentication information for both transmitted and received LSPs and SNPs. allsendonly (2): Encapsulates authentication information for both generated LSPs and SNPs; does not authenticate received LSPs or SNPs. snppacketauthenticationavoid (3): Encapsulates authentication information for only generated LSPs and authenticates received LSPs. snppacketsendonly (4): Encapsulates authentication information for generated LSPs and SNPs; authenticates only received LSPs but does not authenticate received SNPs. By default, authentication is not configured.
Context
- MIB
- HUAWEI-ISIS-CONF-MIB
- OID
.1.3.6.1.4.1.2011.5.25.24.2.1.1.1.10- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwIsisProcBaseEntry
- Table
- hwIsisProcBaseTable
- Siblings
- 47
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | none |
1 | authenticateall |
2 | allsendonly |
3 | snppacketauthenticationavoid |
4 | snppacketsendonly |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwIsisProcIdIndex The value of this object identifies the IS-IS process ID. The value ranges from 1 to 65535. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.1 |
| hwIsisProcDomainAuthCode The value of this object identifies the code of domain authentication.
none (0): The authentication code is not configured.
osi (10): indicates OSI authentication.
ip (133): indic… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.11 |
| hwIsisProcLevel The value of this object identifies the level of the IS-IS process.
level1 (1): indicates level 1.
level2 (2): indicates level 2.
level12 (3): indicates level 1-2.
By default, the… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.12 |
| hwIsisProcL1FlashFloodCount The value of this object identifies the counter of level-1 LSPs on the interface.
The value is an integer ranging from 0 to 15. The value 0 indicates that no counter is configure… | column | Integer32 | .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.13 |
| hwIsisProcL1FlashFloodInterval The value of this object identifies the intervals for level-1 LSP flooding.
The value ranges from 10 to 50000, in milliseconds. The default value is 10 ms. | column | millionseconds Integer32 | .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.14 |
| hwIsisProcL2FlashFloodCount The value of this object identifies the counter of level-2 LSPs on the interface.
The value is an integer ranging from 0 to 15. The value 0 indicates that no counter is configure… | column | Integer32 | .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.15 |
| hwIsisProcL2FlashFloodInterval The value of this object identifies the intervals for level-2 LSP flooding.
The value ranges from 10 to 50000 in milliseconds. The default value is 10ms. | column | millionseconds Integer32 | .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.16 |
| hwIsisProcLogPeerChange Generates a log when the status of the peer changes.
null (0): not configured
enabledwithouttopology (1): IPv4 topology
enabledwithtopology (2): IPv6 topology | column | Enumeration | .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.17 |
| hwIsisProcTimerRefresh The value of this object identifies the timer of LSP refreshing. The value ranges from 1 to 65534, in seconds. The default value is 900s. | column | seconds Integer32 | .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.18 |
| hwIsisProcTimerMaxAge The value of this object identifies the maximum Keepalive time of the LSP. The value ranges from 2 to 65535, in seconds. The default value is 1200s. | column | seconds Integer32 | .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.19 |
| hwIsisProcVpnName The value of this object identifies the name of the IPv4 VPN instance bound to the IS-IS process. The value ranges from 0 to 31. | column | OctetString | .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.2 |
| hwIsisProcL1TimerLspGenMaxInterval The value of this object identifies the timer for the maximum delay of level-1 LSPs with the same LSP ID.
The value ranges from 1 to 120, in seconds. By default, the value is 2s. | column | seconds Integer32 | .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.20 |
| hwIsisProcL1TimerLspGenInitInterval The value of this object identifies the delay timer that initially triggers a level-1 LSP.
The value ranges from 0 to 60000, in milliseconds.
By default, the value is 0. | column | millionseconds Integer32 | .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.21 |
| hwIsisProcL1TimerLspGenIncrInterval The value of this object identifies the delay timer for generating two level-1 LSPs with the same LSP ID.
The value ranges from 1 to 60000, in milliseconds.
By default, the value… | column | millionseconds Integer32 | .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.22 |
| hwIsisProcL2TimerLspGenMaxInterval The value of this object identifies the timer for the maximum delay of Level-2 LSPs with the same LSP ID.
The value ranges from 1 to 120, in seconds. By default, the value is 2s. | column | seconds Integer32 | .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.23 |
| hwIsisProcL2TimerLspGenInitInterval The value of this object identifies the delay timer that initially triggers a Level-2 LSP. The value ranges from 1 to 60000, in milliseconds.
By default, the value is 0. | column | millionseconds Integer32 | .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.24 |
| hwIsisProcL2TimerLspGenIncrInterval The value of this object identifies the delay timer for generating two Level-2 LSPs with the same LSP ID.
The value ranges from 1 to 60000, in milliseconds.
By default, the value… | column | millionseconds Integer32 | .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.25 |
| hwIsisProcTimerSPFMaxInterval The value of this object identifies the maximum intervals for SPF calculation.
The value ranges from 1 to 120, in seconds. By default, the value is 5s. | column | seconds Integer32 | .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.26 |
| hwIsisProcTimerSPFInitInterval The value of this object identifies the delay timer for initial SPF calculation.
The value ranges from 1 to 60000, in milliseconds. By default, the interval is 50ms. | column | millionseconds Integer32 | .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.27 |
| hwIsisProcTimerSPFIncrInterval The value of this object identifies the incremental delay timer for two SPF calculations.
The value ranges from 1 to 60000, in milliseconds. By default, the interval is 200ms. | column | millionseconds Integer32 | .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.28 |
| hwIsisProcCostStyle Configures the cost type of the IS-IS process:
narrow (1): the narrow type
narrowcompatible (2): the narrow-compatible type
compatible (3): compatible type
wide (4): wide type
wid… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.29 |
| hwIsisProcVpn6Name obsolete The value of this object identifies the name of the IPv6 VPN instance bound to the IS-IS process. The value ranges from 0 to 31. | column | OctetString | .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.3 |
| hwIsisProcDynamicName Configures the name of the IS-IS dynamic host. The value is a string of 1 to 64 characters. When the length is 0, the configured IS-IS dynamic host name is deleted. | column | OctetString | .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.30 |
| hwIsisProcGREnabled Whether to enable IS-IS GR.
true (1): enables IS-IS GR.
false (2): does not enable IS-IS GR.
By default, IS-IS GR is disabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.31 |
| hwIsisProcGRInterval The value of this object identifies the maximum intervals for enabling GR.
The value ranges from 0 to 1800, in seconds. By default, the value is 300 seconds.
The value 0 indicate… | column | seconds Integer32 | .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.32 |
| hwIsisProcGRSuppresSAEnabled This object indicates that the SA bit in the sent Hello packet is set to 1 after the GR-enabled device is started:
true (1): enables this function.
false (2): disables this functi… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.33 |
| hwIsisProcTEEnableLevel Enables IS-IS TE.
none (0): does not enable IS-IS TE.
level1 (1): enables level-1 TE.
level2 (2): enables level-2 TE.
level12 (3): enables level-1-2 TE.
By default, IS-IS TE is di… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.34 |
| hwIsisProcBFDEnabled Whether to enable BFD on each interface.
true (1): enables BFD on each interface.
false (2): does not enable BFD on each interface.
By default, BFD is disabled on each interface. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.35 |
| hwIsisProcBFDFrrBindEnabled Enables BFD-FRR binding on each interface.
true (1): enables BFD-FRR binding on each interface.
false (2): does not enable BFD-FRR binding on each interface.
By default, BFD-FRR b… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.36 |
| hwIsisProcBFDMinTxInterval The value of this object identifies the minimum interval for sending BFD packets.
If isis binding to vpn and ipv4-family not enable, The value is zero. | column | seconds Integer32 | .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.37 |
| hwIsisProcBFDMinRecvInteval The value of this object identifies the minimum interval for receiving BFD packets.
If isis binding to vpn and ipv4-family not enable, The value is zero. | column | seconds Integer32 | .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.38 |
| hwIsisProcBFDMultiplier The value of this object identifies the local detection multiplier. The value ranges from 1 to 255.
If isis binding to vpn and ipv4-family not enable, The value is zero. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.39 |
| hwIsisProcAreaAuthType The value of this object identifies the type of IS-IS area authentication.
null (0): Area authentication is not configured.
md5 (1): The password is sent after being encrypted thr… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.4 |
| hwIsisProcIPv6EnableTopologyType This objects indicates whether the IPv6 topology is enabled for the IS-IS process:
disable(0): disables the IPv6 topology of the IS-IS process.
standard(1): specifies the topology… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.40 |
| hwIsisProcRowStatus This object supports settings of two values.
createAndGo(4): A row is created.
destroy(6): A row is deleted. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.41 |
| hwIsisProcOptionalChecksumEnabled Enables BFD-FRR binding on each interface.
true (1): enables optional checksum for CSNP,PSNP and IIH PDU.
false (2): disables optional checksum for CSNP,PSNP and IIH PDU.
By defau… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.42 |
| hwisisProcLsdbMaxLimit This object is used to set the maximum limit number of IS-IS LSPs.
The value range is from 0 to 500000.
The default value 0 means no limit. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.43 |
| hwIsisProcLsdbUpperThreshold This object is used to set the upper threshold value of LSPs limit.
The value range is from 1 to 100.
The default means 80. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.44 |
| hwIsisProcLsdbLowerThreshold This object is used to set the lower threshold value of LSPs limit.
The value range is from 1 to 100.
The default means 70. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.45 |
| hwIsisProcLsdbTotal This object is used to get the number of IS-IS LSPs. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.46 |
| hwIsisProcAreaAuthKeychainName This object indicates the keychain name of IS-IS area authentication. The name is a string of characters.
The name is a string of 0 to 47 characters. The length 0 indicates that n… | column | OctetString | .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.47 |
| hwIsisProcDomainAuthKeychainName This object indicates the keychain name of IS-IS domain authentication. The name is a string of characters.
The name is a string of 0 to 47 characters. The length 0 indicates that… | column | OctetString | .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.48 |
| hwIsisProcAreaAuthPasswordName This object indicates the password of IS-IS area authentication. The password is a string of characters.
If the IS-IS area authentication mode is simple, the password is a string … | column | OctetString | .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.5 |
| hwIsisProcAreaAuthPacketAuthMode The value of this object identifies the packet authentication mode of IS-IS area authentication:
none (0): Authentication mode is not configured.
authenticateall (1): Encapsulates… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.6 |
| hwIsisProcAreaAuthCode The value of this object identifies the code of area authentication.
none (0): The authentication code is not configured.
osi (10): indicates OSI authentication.
ip (133): indicat… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.7 |
| hwIsisProcDomainAuthType The value of this object identifies the type of IS-IS router domain authentication.
null (0): Domain authentication is not configured.
md5 (1): The password is sent after being en… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.8 |
| hwIsisProcDomainAuthPasswordName This object indicates the password of IS-IS routing domain authentication. The password is a string of characters.
If the IS-IS routing domain authentication mode is simple, the p… | column | OctetString | .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.9 |