hwIsisProcDefRoutAdvType
HUAWEI-ISIS-CONF-MIB ·
.1.3.6.1.4.1.2011.5.25.24.2.1.3.1.4
Object
column
r/w
Enumeration
This object is used to set the mode in which default routes are advertised: null(0): indicates that default routes are not advertised. always(1): indicates that default routes are always advertised. matchdefault(2): If there is the default route that is generated by another routing protocol or another IS-IS process in the routing table, this default route is advertised in an LSP. If this default route is deleted from the routing table, this default route is not advertised in the LSP. routepolicy(3): indicates that default routes are advertised according to the routing policy.
Context
- MIB
- HUAWEI-ISIS-CONF-MIB
- OID
.1.3.6.1.4.1.2011.5.25.24.2.1.3.1.4- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwIsisProcMTExtEntry
- Table
- hwIsisProcMTExtTable
- Siblings
- 32
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | null |
1 | always |
2 | matchdefault |
3 | routepolicy |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwIsisIpTypeIndex This object indicates the IP protocol type:
ipv4(1): indicates IPv4.
ipv6(2): indicates IPv6. | column | InetAddressType | .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.1 |
| hwIsisProcL1CircuitCost Global level-1 cost for all the interfaces.
If the costStyle of the process is wide or widecompatible, the range of this value is from 1 to 16777215, else the range of this value… | column | Integer32 | .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.10 |
| hwIsisProcL2CircuitCost Global level-2 cost for all the interfaces.
If the costStyle of the process is wide or widecompatible, the range of this value is from 1 to 16777215, else the range of this value … | column | Integer32 | .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.11 |
| hwIsisProcPrefValue This object is used to set the preference of an IS-IS route. The value ranges from 1 to 255, and the default value is 15.
If isis binding to vpn and ip-family not enable, The valu… | column | Integer32 | .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.12 |
| hwIsisProcPrefPolicyName This object indicates the name of the routing policy used for route filtering. The name is a string of 0 to 40 characters.
Zero-length means no configuration. | column | OctetString | .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.13 |
| hwIsisProcMaxLoadBalance This object is used to set the number of equal-cost routes.
The range and the default value depend on license.
If isis binding to vpn and ip-family not enable, The value is zero. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.14 |
| hwIsisProcL1CircuitDefaultTag This object is used to set the default administrative tag of an IS-IS Level-1 route. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.15 |
| hwIsisProcL2CircuitDefaultTag This object is used to set the default administrative tag of an IS-IS Level-2 route. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.16 |
| hwIsisProcBandWidthReference This object is used to set the reference bandwidth. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.17 |
| hwIsisProcAutoCostEnabled This object indicates whether automatic interface cost calculation is enabled:
true(1): indicates that automatic interface cost calculation is enabled.
false(2): indicates that au… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.18 |
| hwIsisProcSetOverLoad This object indicates whether a device is enabled to notify its neighbors that its status is Overload:
disable (0): indicates that a device is disabled from notifying its neighbor… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.19 |
| hwIsisMTIdIndex The value of this object identifies the MT ID. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.2 |
| hwIsisProcSetOverLoadAllowRoute This object indicates that the type of routes to be advertised when a device is in the Overload state:
null(0): indicates that no route type is specified.
external(1): indicates t… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.20 |
| hwIsisProcOnStartInterval The value of this object identifies the interval for waiting to clear the overload bit after the system is started.
The value ranges from 5 to 86400, in seconds. The default valu… | column | seconds Integer32 | .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.21 |
| hwIsisProcOnStartStartFromPeer This object indicates the system ID of a neighbor. | column | OctetString | .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.22 |
| hwIsisProcOnStartFromPeerInterval The value of this object identifies the maximum interval for waiting to clear the
overload bit after the system is started and the neighbor relationship is established.
The value… | column | seconds Integer32 | .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.23 |
| hwIsisProcOnStartWaitForBgpEnabled This object indicates whether the function of waiting for BGP convergence is enabled:
true(1): indicates that the function of waiting for BGP convergence is enabled.
false(2): ind… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.24 |
| hwIsisProcMTStatus This object indicates the row status of this table:
createAndGo(4): indicates that a row is created.
destroy(6): indicates that a row is deleted. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.25 |
| hwIsisProcL1RedistMaxLimit This object is used to set the maximum limit number of IS-IS Level-1 redistribute routes advertised in LSPs.
The value range is from 0 to 10000000.
The default value 0 means no … | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.26 |
| hwIsisProcL2RedistMaxLimit This object is used to set the maximum limit number of IS-IS Level-2 redistribute routes advertised in LSPs.
The value range is from 0 to 10000000.
The default value 0 means no … | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.27 |
| hwIsisProcL1UpperRedistThreshold This object is used to set the upper threshold value of level-1 import limit.
The value range is from 1 to 100.
The default means 80. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.28 |
| hwIsisProcL2UpperRedistThreshold This object is used to set the upper threshold value of level-2 import limit.
The value range is from 1 to 100.
The default means 80. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.29 |
| hwIsisMTName This object indicates the name of the topology to be bound to an IS-IS process. The value is a string of 1 to 31 characters. | column | OctetString | .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.3 |
| hwIsisProcL1LowerRedistThreshold This object is used to set the lower threshold value of level-1 import limit.
The value range is from 1 to 100.
The default means 70. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.30 |
| hwIsisProcL2LowerRedistThreshold This object is used to set the lower threshold value of level-2 import limit.
The value range is from 1 to 100
The default means 70. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.31 |
| hwIsisProcL1TotalRedist This object is used to get the number of level-1 import routes. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.32 |
| hwIsisProcL2TotalRedist This object is used to get the number of level-2 import routes. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.33 |
| hwIsisProcDefRoutAdvPolicyName This object indicates the routing policy name.
The name is a string of 0 to 40 characters. | column | OctetString | .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.5 |
| hwIsisProcDefRoutAdvCost This object is used to set the cost of a default route. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.6 |
| hwIsisProcDefRoutAdvTag This object is used to set the administrative tag of a default route. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.7 |
| hwIsisProcDefRoutAdvLevel This object is used to set the level of a default route:
level1(1): indicates Level-1.
level2(2): indicates Level-2.
level12(3): indicates Level-1-2.
By default, the level of a de… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.8 |
| hwIsisProcDefRoutAdvAvoidLearnEnabled This object indicates whether an IS-IS process is prevented from learning default routes or adding them to the routing table:
true(1): indicates that an IS-IS process is prevented… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.9 |