hwIsisL2ImportRouteThresholdReach
HUAWEI-ISIS-CONF-MIB ·
.1.3.6.1.4.1.2011.5.25.24.2.4.8
Object
notification
ISIS level-2 number of imported routes has reached the threshold value.
Context
- MIB
- HUAWEI-ISIS-CONF-MIB
- OID
.1.3.6.1.4.1.2011.5.25.24.2.4.8- Type
- notification
- Status
- current
- Parent
- hwIsisTraps
- Siblings
- 41
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwIsisSystemIdConflict IS-IS detects a system ID conflict in an area. | notification | - | .1.3.6.1.4.1.2011.5.25.24.2.4.1 |
| hwIsisLsdbThresholdReach The number of LSP has reached the upper threshold value. | notification | - | .1.3.6.1.4.1.2011.5.25.24.2.4.10 |
| hwIsisLsdbThresholdReachClear The number of LSP has been less than the lower threshold value. | notification | - | .1.3.6.1.4.1.2011.5.25.24.2.4.11 |
| hwIsisSystemIdAutoRecover After a system ID conflict was detected within an IS-IS area, IS-IS changed the system ID automatically. | notification | - | .1.3.6.1.4.1.2011.5.25.24.2.4.12 |
| hwIsisAdjacencyChangeClear The isisAdjacencyChange alarm was cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.24.2.4.13 |
| hwIsisSeqNumExceedThreshold The LSP sequence number has exceeded the upper threshold value. | notification | - | .1.3.6.1.4.1.2011.5.25.24.2.4.14 |
| hwIsisSeqNumExceedThresholdClear The LSP sequence number has been less than the upper threshold value. | notification | - | .1.3.6.1.4.1.2011.5.25.24.2.4.15 |
| hwIsisAttemptToExceedMaxSequenceClear The LSP sequence number has been less than the maximum value. | notification | - | .1.3.6.1.4.1.2011.5.25.24.2.4.16 |
| hwIsisPeerFlapSuppStatusChange The object is used to monitor the peer flapping-suppress status of interface in ISIS. | notification | - | .1.3.6.1.4.1.2011.5.25.24.2.4.17 |
| hwIsisLspRemainingLifetimeRefresh The object is used to monitor the receiving of LSP with small remaining lifetime. | notification | - | .1.3.6.1.4.1.2011.5.25.24.2.4.18 |
| hwIsisDeleteRouteByPurge The local device deleted IS-IS routes advertised by other devices. | notification | - | .1.3.6.1.4.1.2011.5.25.24.2.4.19 |
| hwIsisL1ImportRouteExceedLimit ISIS level-1 number of imported routes has exceeded the maximum limit. | notification | - | .1.3.6.1.4.1.2011.5.25.24.2.4.2 |
| hwIsisDeleteRouteByPurgeClear The local device did not delete IS-IS routes advertised by other devices. | notification | - | .1.3.6.1.4.1.2011.5.25.24.2.4.20 |
| hwIsisRouteBeDeletedByPurgeExact IS-IS routes advertised by the local device were deleted by another device. | notification | - | .1.3.6.1.4.1.2011.5.25.24.2.4.21 |
| hwIsisRouteBeDeletedByPurgeExactClear IS-IS routes advertised by the local device were not deleted by another device. | notification | - | .1.3.6.1.4.1.2011.5.25.24.2.4.22 |
| hwIsisRouteBeDeletedByPurgeInexact IS-IS routes advertised by the local device were deleted by another device, and the possibly faulty device did not
support IS-IS purge LSP source tracing. Log in to the possibly … | notification | - | .1.3.6.1.4.1.2011.5.25.24.2.4.23 |
| hwIsisRouteBeDeletedByPurgeInexactClear IS-IS routes advertised by the local device were not deleted by another device. | notification | - | .1.3.6.1.4.1.2011.5.25.24.2.4.24 |
| hwIsisRouteBeDeletedByPurge IS-IS routes advertised by the local device were deleted by another device. Log in to the possibly faulty device.
If the device is deleting routes, reset or isolate it from the n… | notification | - | .1.3.6.1.4.1.2011.5.25.24.2.4.25 |
| hwIsisRouteBeDeletedByPurgeClear IS-IS routes advertised by the local device were not deleted by another device. | notification | - | .1.3.6.1.4.1.2011.5.25.24.2.4.26 |
| hwIsisThirdPartRouteBeDeletedByPurgeExact IS-IS routes advertised by another device were deleted. Reset or isolate the faulty device from the network. | notification | - | .1.3.6.1.4.1.2011.5.25.24.2.4.27 |
| hwIsisThirdPartRouteBeDeletedByPurgeExactClear IS-IS routes advertised by another device were not deleted. | notification | - | .1.3.6.1.4.1.2011.5.25.24.2.4.28 |
| hwIsisThirdPartRouteBeDeletedByPurgeInexact IS-IS routes advertised by another device were deleted, and the possibly faulty device did not support
IS-IS purge LSP source tracing. Log in to the possibly faulty device. If th… | notification | - | .1.3.6.1.4.1.2011.5.25.24.2.4.29 |
| hwIsisL1ImportRouteRestoreToLimit ISIS level-1 number of imported routes is restored to less than or equal to the maximum limit. | notification | - | .1.3.6.1.4.1.2011.5.25.24.2.4.3 |
| hwIsisThirdPartRouteBeDeletedByPurgeInexactClear IS-IS routes advertised by another device were not deleted. | notification | - | .1.3.6.1.4.1.2011.5.25.24.2.4.30 |
| hwIsisThirdPartRouteBeDeletedByPurge IS-IS routes advertised by another device were deleted. Log in to the possibly faulty device.
If the device is deleting routes, reset or isolate it from the network. Otherwise, c… | notification | - | .1.3.6.1.4.1.2011.5.25.24.2.4.31 |
| hwIsisThirdPartRouteBeDeletedByPurgeClear IS-IS routes advertised by another device were not deleted. | notification | - | .1.3.6.1.4.1.2011.5.25.24.2.4.32 |
| hwIsisAuthModeInsecure This object indicates that an insecure authentication mode is configured for IS-IS. | notification | - | .1.3.6.1.4.1.2011.5.25.24.2.4.33 |
| hwIsisAuthModeInsecureClear This object indicates that the insecure authentication mode configured for IS-IS is deleted. | notification | - | .1.3.6.1.4.1.2011.5.25.24.2.4.34 |
| hwRouteLoopDetected This object indicates that a routing loop has been detected on the local device. | notification | - | .1.3.6.1.4.1.2011.5.25.24.2.4.35 |
| hwRouteLoopDetectedClear This object indicates that the routing loop is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.24.2.4.36 |
| hwIsisImportRouteReachMax The number of import routes in this IS-IS process reached or exceeded the maximum. | notification | - | .1.3.6.1.4.1.2011.5.25.24.2.4.37 |
| hwIsisImportRouteReachMaxClear The number of import routes in this IS-IS process has been less than the maximum. | notification | - | .1.3.6.1.4.1.2011.5.25.24.2.4.38 |
| hwIsisLinkCostAdjustment An IS-IS link cost adjustment event occurs. | notification | - | .1.3.6.1.4.1.2011.5.25.24.2.4.39 |
| hwIsisL2ImportRouteExceedLimit ISIS level-2 number of imported routes has exceeded the maximum limit. | notification | - | .1.3.6.1.4.1.2011.5.25.24.2.4.4 |
| hwIsisLinkCostAdjustmentClear An IS-IS link cost adjustment event is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.24.2.4.40 |
| hwisisLocatorPrefixConflict Locator or interface IPv6 prefix conflict with locator prefix between local and another device is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.24.2.4.41 |
| hwisisLocatorPrefixConflictClear Locator or interface IPv6 prefix conflict with locator prefix between local and another device is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.24.2.4.42 |
| hwIsisL2ImportRouteRestoreToLimit ISIS level-2 number of imported routes is restored to less than or equal to the maximum limit. | notification | - | .1.3.6.1.4.1.2011.5.25.24.2.4.5 |
| hwIsisL1ImportRouteThresholdReach ISIS level-1 number of imported routes has reached the threshold value. | notification | - | .1.3.6.1.4.1.2011.5.25.24.2.4.6 |
| hwIsisL1ImportRouteThresholdReachClear ISIS level-1 number of imported routes has been less than the threshold value. | notification | - | .1.3.6.1.4.1.2011.5.25.24.2.4.7 |
| hwIsisL2ImportRouteThresholdReachClear ISIS level-2 number of imported routes has been less than the threshold value. | notification | - | .1.3.6.1.4.1.2011.5.25.24.2.4.9 |
Notification Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwIsisProcL2RedistMaxLimit This object is used to set the maximum limit number of IS-IS Level-2 redistribute routes advertised in LSPs.
The value range is from 0 to 10000000.
The default value 0 means no … | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.27 |
| hwIsisProcL2UpperRedistThreshold This object is used to set the upper threshold value of level-2 import limit.
The value range is from 1 to 100.
The default means 80. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.29 |
| hwIsisProcL2LowerRedistThreshold This object is used to set the lower threshold value of level-2 import limit.
The value range is from 1 to 100
The default means 70. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.31 |
| hwIsisProcL2TotalRedist This object is used to get the number of level-2 import routes. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.33 |