hwIpDslamAntiBcAttackOntQueryTable
HUAWEI-IPDSLAM-SECURITY-MIB ·
.1.3.6.1.4.1.2011.6.47.58
Object
table
Indicates the information of the ONT, which occurred the broadcast-attack. The indexes of this table are hwIpDslamAntiBcAttackOntQueryIfIndex and hwIpDslamAntiBcAttackOntQueryOntId.
Context
- MIB
- HUAWEI-IPDSLAM-SECURITY-MIB
- OID
.1.3.6.1.4.1.2011.6.47.58- Type
- table
- Status
- current
- Parent
- hwIpDslamSecurity
- Siblings
- 86
- Children
- 1
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwIpDslamAntiIcmpStatus Used for setting or querying the anti-ICMP-attack status.
Options:
1. enabled(1) -indicates the anti-ICMP-attack status is enabled
2. disabled(2) -indicates the anti-ICMP-attack … | scalar | EnabledStatus | .1.3.6.1.4.1.2011.6.47.1 |
| hwIpDslamAntiMacSpoofingPppoeOverallAgingTime Used for setting or querying the aging time of the PPPoE user when anti-MAC-spoofing is enabled.
The aging time must be larger than the aging period (the value of hwIpDslamAntiMac… | scalar | Integer32 | .1.3.6.1.4.1.2011.6.47.10 |
| hwIpDslamAntiMacSpoofingPppoeAgingPeriod Used for setting or querying the aging period of the PPPoE user when anti-MAC spoofing is enabled.
The system checks whether the PPPoE user is online after every aging period. If … | scalar | Integer32 | .1.3.6.1.4.1.2011.6.47.11 |
| hwIpDslamAntiMacSpoofingDhcpOverallAgingTime The value of DHCP Overall Aging Time when enable the Mac spoofing.
The value 0 is invalid in current version.
Unit: second
Default: 1560 | scalar | Integer32 | .1.3.6.1.4.1.2011.6.47.12 |
| hwIpDslamDesMacAddrFilteringTable Describes the destination MAC address filtering function. With this function, the system checks
the destination MAC address of the user packet based on the configured MAC address … | table | - | .1.3.6.1.4.1.2011.6.47.13 |
| hwIpDslamDynSrcMacAddrFilteringTable Used for querying the dynamically learned MAC address on the network side. The system checks the source
MAC address of the user packet based on this MAC address entry.
If the sour… | table | - | .1.3.6.1.4.1.2011.6.47.14 |
| hwIpDslamMacAbnormalDetectStatus The switch of the Mac-Abnormal-Detect function.
Options:
1. enabled(1) -indicates the Mac-Abnormal-Detect function is enabled
2. disabled(2) -indicates the Mac-Abnormal-Detect fu… | scalar | EnabledStatus | .1.3.6.1.4.1.2011.6.47.15 |
| hwIpDslamMacAbnormalDetectIntervalTime The interval of the Mac-Abnormal-Detect.
Range: 30-3600
Unit: second
Default: 60 | scalar | Integer32 | .1.3.6.1.4.1.2011.6.47.16 |
| hwIpDslamAntiIpServicePortTable Used for enabling or disabling anti-IP-spoofing of the service port. Anti-IP-spoofing
on a service port takes effect only when it is enabled globally and is enabled on this
servic… | table | - | .1.3.6.1.4.1.2011.6.47.17 |
| hwIpDslamAntiDosAlarmThreshold The alarm threshold of ANTI-DOS. if a PVC send the packets to CPU more than the threshold in one second, the DoS generated.
Range: 10-200
Default: 20 | scalar | Integer32 | .1.3.6.1.4.1.2011.6.47.18 |
| hwIpDslamAntiDosPortAction The port action of DoS occurs.
Options:
1. deactive(1) -disactive the user.
2. none(2) -do nothing.
Default: deactive(1) | scalar | Enumeration | .1.3.6.1.4.1.2011.6.47.19 |
| hwIpDslamAntiIpStatus Used for setting or querying the anti-IP-attack status.
Options:
1. enabled(1) -indicates the anti-IP-attack status is enabled
2. disabled(2) -indicates the anti-IP-attack status… | scalar | EnabledStatus | .1.3.6.1.4.1.2011.6.47.2 |
| hwIpDslamAntiDosResumeTime The port resume time of ANTI-DOS, it must be a multiple of 10.
Range: 10-2880
Unit: minute
Default: 60 | scalar | minute Integer32 | .1.3.6.1.4.1.2011.6.47.20 |
| hwIpDslamArpDetectMode Used for setting or querying the arp detection mode.
when dhcp spoofing send the arp detecting packet,use the gateway mode,
the source mac will be the gateway mac,or if use the du… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.47.21 |
| hwIpDslamSecurityVlanCtrlTable The table used to configure the IP-spoofing based on VLAN.
The index of this table is hwIpDslamSecurityVlanCtrlIndex. | table | - | .1.3.6.1.4.1.2011.6.47.22 |
| hwIpDslamAntiDosPolicy The Policy of ANTI-DOS.
Options:
1. default(1) -default process
2. deactivePorts(2) -deactive the xdsl port which detects dos attack happened based on default process
Defaul… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.47.23 |
| hwIpDslamAntiDosPacketProcPolicy Used for setting or querying the policy for processing packets in anti-DoS-attack.
Options:
1. deny(1) -denies processing packets in anti-DoS-attack
2. permit(2) -permits proces… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.47.24 |
| hwIpDslamAntiDosPacketLimitTable Used for setting or querying the threshold for the port-based packet rate in anti-DoS-attack.
The traffic exceeding this threshold is discarded.
The indexes of this table are hwIp… | table | - | .1.3.6.1.4.1.2011.6.47.25 |
| hwIpDslamTrapsVbOids | node | - | .1.3.6.1.4.1.2011.6.47.26 |
| hwIpDslamTraps | node | - | .1.3.6.1.4.1.2011.6.47.27 |
| hwIpDslamSecurityConflictLogTable Used for querying the IP/MAC conflict logs of the DHCP, PPPOE, SLAAC and DHCPv6 packets when the
anti-IP-spoofing or anti-MAC-spoofing is enabled.
The index of this table is hwIpD… | table | - | .1.3.6.1.4.1.2011.6.47.28 |
| hwIpDslamSecurityConflictStatisticTable Used for querying the statistics of the packets with IP/MAC conflict and illegal arp packets.
The index of this table is hwIpDslamSecurityConflictStatIfindex, which is the
index o… | table | - | .1.3.6.1.4.1.2011.6.47.29 |
| hwIpDslamIpAddrDynamicBindingStatus Used for setting or querying the global status of IP address dynamic binding.
Options:
1. enabled(1) -indicates the global status of IP address dynamic binding is enabled
2. disa… | scalar | EnabledStatus | .1.3.6.1.4.1.2011.6.47.3 |
| hwIpDslamAntiMacDuplicateStatus Used for setting or querying the anti-MAC-duplicate status.
Options:
1. enabled(1) -indicates the anti-MAC-duplicate status is enabled
2. disabled(2) -indicates the anti-MAC-dupl… | scalar | EnabledStatus | .1.3.6.1.4.1.2011.6.47.30 |
| hwIpDslamIpv6NsReplySwitch The switch of the Ns-Reply function.
Options:
1. enabled(1) -indicates the Ns-Reply function is enabled
2. disabled(2) -indicates the Ns-Reply function is disabled
Default: d… | scalar | EnabledStatus | .1.3.6.1.4.1.2011.6.47.31 |
| hwIpDslamIpv6NsReplyUnknownPolicy Used for setting how to transmit the NS packets received from the network side.
It takes effect only when the Ns-Reply function is enabled.
It indicates whether the packet forward… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.47.32 |
| hwIpDslamAntiIpv6SpoofingStatus Used for setting or querying the anti-IPv6-spoofing status.
Options:
1. enabled(1) -indicates the anti-IPv6-spoofing status is enabled
2. disabled(2) -indicates the anti-IPv6-spo… | scalar | EnabledStatus | .1.3.6.1.4.1.2011.6.47.33 |
| hwIpv6NdDetectMode Used for setting or querying the ND detection mode. It takes effect to detect the user on-line or not.
If using the dummy mode, the source IP/MAC in the ND detecting packet is the… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.47.34 |
| hwIpDslamIpv6DynamicBindingTable It is the table for querying the dynamic binding item between the IPv6 address and the service port.
If anti-IPv6-spoofing is enabled, the IPv6 address obtained by the user is bou… | table | - | .1.3.6.1.4.1.2011.6.47.35 |
| hwIpDslamIpv4ArpReplySwitch The switch of the Arp-Reply function.
Options:
1. enable(1) -indicates that the arp reply function is enabled
2. disable(2) -indicates that the arp reply function is disabled
Def… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.47.36 |
| hwIpDslamIpv4ArpReplyUnknownPolicy Used for setting how to transmit the ARP packets received from the network side.
It takes effect only when the Arp-Reply function is enabled.
It indicates whether the packet forwa… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.47.37 |
| hwIpDslamIpv6BindRouteAndNdSwitch The status of the Bind-Route-ND function.
Options:
1. enabled(1) -indicates the Bind-Route-ND function is enabled
2. disabled(2) -indicates the Bind-Route-ND function is disa… | scalar | EnabledStatus | .1.3.6.1.4.1.2011.6.47.38 |
| hwIpDslamIpv6DadProxySwitch The status of the DAD Proxy.
Options:
1. enabled(1) -indicates the Dad Proxy function is enabled
2. disabled(2) -indicates the Dad Proxy function is disabled
Default: disable… | scalar | EnabledStatus | .1.3.6.1.4.1.2011.6.47.39 |
| hwIpDslamAntiMacSpoofingStatus Used for setting or querying the global anti-MAC-spoofing status.
Options:
1. enabled(1) -indicates the global anti-MAC-spoofing status is enabled
2. disabled(2) -indicates the g… | scalar | EnabledStatus | .1.3.6.1.4.1.2011.6.47.4 |
| hwIpDslamAntiIpExcludeSwitch Used to specify the type of the packet that is not affected by anti-IP-spoofing.
Options:
1. igmp(0) -indicates that anti-IP-spoofing is invalid for IGMP packets
2. dhcp(1) … | scalar | Bits | .1.3.6.1.4.1.2011.6.47.40 |
| hwIpDslamAntiMacExcludeSwitch Used to specify the type of the packet that is not affected by anti-MAC-spoofing.
Options:
1. igmp(0) -indicates that anti-MAC-spoofing is invalid for IGMP packets
2. mld(1) … | scalar | Bits | .1.3.6.1.4.1.2011.6.47.41 |
| hwIpDslamDynamicBindingTable It is the table for deleting the dynamic binding table.
If anti-IP-spoofing function is enabled, the dynamic binding table can be deleted by the service port
and IP address. If an… | table | - | .1.3.6.1.4.1.2011.6.47.42 |
| hwIpDslamSecurityDhcpClientIdentifier Used to specify the dhcp client identifier.
Options:
1. chaddr(1) -indicates that DHCP user is always identified based on chaddr in the packet.
2. option61(2) -indicates that … | scalar | Enumeration | .1.3.6.1.4.1.2011.6.47.43 |
| hwIpDslamAntiMacSpoofingControlprotocolIpv6oeStatus Used for setting or querying the anti-MAC-spoofing control protocol IPv6oE status.
Options:
1. enabled(1) -indicates the anti-MAC-spoofing control protocol IPv6oE status is enabl… | scalar | EnabledStatus | .1.3.6.1.4.1.2011.6.47.44 |
| hwIpDslamSecurityExConflictStatisticTable Used for querying the statistics of the packets with IP,IPv6,MAC conflict and illegal arp packets.
The indexes of this table are hwIpDslamSecurityExConflictStatIfindex, hwIpDslamS… | table | - | .1.3.6.1.4.1.2011.6.47.45 |
| hwFirewallStatus indicate the firewall switch status.
Options:
1. enable(1) -indicates the firewall status is enable.
2. disable(2) -indicates the firewall status is disable.
default:disable(2) | scalar | Enumeration | .1.3.6.1.4.1.2011.6.47.46 |
| hwFirewallDefault indicate the firewall default operation to the packet which does not match the acl rules existed in the interface.
Options:
1. permit(1) -indicates the firewall permit the packet … | scalar | Enumeration | .1.3.6.1.4.1.2011.6.47.47 |
| hwFirewallPacketFilterTable It is used to config the ACL rules of appointed interface. The number of ACL rule added or deleted is hwFirewallPacketFilterAclNumber.
There are two directions in one interface, a… | table | - | .1.3.6.1.4.1.2011.6.47.48 |
| hwFirewallPacketFilterStatisticsTable It is used to count the number of the packet which is permitted or denied by the ACL rules,
if there are not ACL rules in the interface,it will not be counted and displayed.
The i… | table | - | .1.3.6.1.4.1.2011.6.47.49 |
| hwIpDslamAntiDosStatus Indicates the global anti-DoS-attack status.
Options:
1. enabled(1) -indicates the global anti-DoS-attack status is enabled
2. disabled(2) -indicates the global anti-DoS-attack s… | scalar | EnabledStatus | .1.3.6.1.4.1.2011.6.47.5 |
| hwFirewallPacketFilterDefaultStatisticsTable It is used to count the number of the packet which is permitted or denied by default operation,
if there are not ACL rules in the interface,it will not be counted and displayed.
T… | table | - | .1.3.6.1.4.1.2011.6.47.50 |
| hwFirewallDefendTracert indicate the firewall tracert defense status.
Options:
1. enable(1) -indicates the firewall tracert defense is enable.
2. disable(2) -indicates the firewall tracert defense is di… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.47.51 |
| hwIpv6IfAccessTable It is used to set two access features about Ipv6 on vlanif interface.
The features are denying the packet which target ip is link local address
and limiting the nerghbor entry num… | table | - | .1.3.6.1.4.1.2011.6.47.52 |
| hwIpDslamSourceRouteStatus Indicates the source route filtering status.
Options:
1. enable(1) -indicates the source route filtering status is enable.
2. disable(2) -indicates the source route filtering sta… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.47.53 |
| hwIpDslamAntiMacIgnoreSwitch Used to specify the type of the packet that is ignored by anti-MAC-spoofing.
Options:
1. downstramPadt(0) -indicates that anti-MAC-spoofing is invalid for downstream PADT packe… | scalar | Bits | .1.3.6.1.4.1.2011.6.47.54 |
| hwIpDslamAntiBcAttackXponPortDefaultRate Indicates the default threshold of the xPon port anti-broadcast-attack rate.
0: The broadcast packet rate is not limited.
Range: 0, 2-25000
Default: 0
Unit: pps | scalar | Integer32 | .1.3.6.1.4.1.2011.6.47.55 |
| hwIpDslamAntiBcAttackXponOntDefaultRate Indicates the default threshold of the ONT anti-broadcast-attack rate.
0: The broadcast packet rate is not limited.
Range: 0, 2-25000
Default: 0
Unit: pps | scalar | Integer32 | .1.3.6.1.4.1.2011.6.47.56 |
| hwIpDslamAntiBcAttackOntResumeInterval Indicates the resume interval when the ONT was deactive because of anti-broadcast-attack.
In the set operation, if it is set to -1, it indicates an undo operation.
In the query op… | scalar | Integer32 | .1.3.6.1.4.1.2011.6.47.57 |
| hwIpDslamCmtsMacAddrDynamicBindingTable This table is used for querying dynamic bound MAC address entries of all service ports on a CM.
After MAC anti-spoofing is enabled, the user's MAC address is bound to a correspond… | table | - | .1.3.6.1.4.1.2011.6.47.59 |
| hwIpDslamSrcMacAddrFilteringTable Describes the MAC address filtering function. With this function, the system checks the source
MAC address of the user packet based on the configured MAC address entry.
If the sou… | table | - | .1.3.6.1.4.1.2011.6.47.6 |
| hwIpDslamAntiIllegalArpStatus Used for setting or querying the anti-illegal-arp status.
Options:
1. enabled(1) -indicates the anti-illegal-arp status is enabled
2. disabled(2) -indicates the anti-illegal-arp … | scalar | EnabledStatus | .1.3.6.1.4.1.2011.6.47.60 |
| hwIpDslamAntiIllegalNdStatus Used for setting or querying the anti-illegal-nd status.
Options:
1. enabled(1) -indicates the anti-illegal-nd status is enabled
2. disabled(2) -indicates the anti-illegal-nd sta… | scalar | EnabledStatus | .1.3.6.1.4.1.2011.6.47.61 |
| hwIpDslamAntiBcAttackTrafficLimitSwitch Indicates whether the broadcast packet rate limitation function is enabled for the ONT.
Options:
1. enable(1) -indicates that the broadcast packet rate limitation function is ena… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.47.62 |
| hwIpDslamAntiBcAttackPortRateTable Indicates the broadcast packet rate threshold of the port.
The index of this table is hwIpDslamAntiBcAttackPortRateIfIndex. | table | - | .1.3.6.1.4.1.2011.6.47.63 |
| hwIpDslamAntiBcAttackOntRateTable Indicates the broadcast packet rate threshold of the ONT.
The indexes of this table are hwIpDslamAntiBcAttackOntRateIfIndex and hwIpDslamAntiBcAttackOntRateOntId. | table | - | .1.3.6.1.4.1.2011.6.47.64 |
| hwIpDslamSecurityUserAutoBackupSwitch Indicates whether the security user auto-backup function is enabled.
Options:
1. enable(1) -indicates that the security user auto-backup function is enabled.
2. disable(2) -indic… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.47.65 |
| hwIpDslamSecurityUserAutoBackupPeriod Indicates the security user auto-backup period.
Range: 5-60
Unit: minute
Default: 30 | scalar | minute Integer32 | .1.3.6.1.4.1.2011.6.47.66 |
| hwIpDslamSecurityUserAutoLoadAttemptTimeout Indicates the security user auto-load attempt overall time.
Range: 1-60
Unit: minute
Default: 15 | scalar | minute Integer32 | .1.3.6.1.4.1.2011.6.47.67 |
| hwIpDslamSecurityUserAutoLoadAttemptPeriod Indicates the security user auto-load attempt interval time.
Range: 1-30
Unit: minute
Default: 5 | scalar | minute Integer32 | .1.3.6.1.4.1.2011.6.47.68 |
| hwIpDslamAntiMacServicePortTable Used for enabling or disabling anti-MAC-spoofing of the service port. Anti-MAC-spoofing
on a service port takes effect only when it is enabled globally and is enabled on the
VLAN… | table | - | .1.3.6.1.4.1.2011.6.47.69 |
| hwIpDslamMacAddrDynamicBindingTable It is the table for the dynamic binding between the MAC address and the service port and is used
for querying the entry of the dynamic binding between the MAC address and the serv… | table | - | .1.3.6.1.4.1.2011.6.47.7 |
| hwCableSystemIPv6SourceVerify Indicates IPv6 Source Address Verification (SAV) function for CM configured policies.
Options:
1. enable(1) -indicates that the IPv6 Source Address Verification for CM configured… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.47.70 |
| hwIpDslamUserDeleteDelay Indicates the security user delete delay time.
Range: 0-120
Unit: second
Default: 0 | scalar | second Integer32 | .1.3.6.1.4.1.2011.6.47.71 |
| hwIpDslamAntiMacDuplicateAlarmStatus Used for setting or querying the anti-MAC-duplicate alarm status.
Options:
1. enabled(1) -indicates the anti-MAC-duplicate alarm status is enabled
2. disabled(2) -indicates the a… | scalar | EnabledStatus | .1.3.6.1.4.1.2011.6.47.72 |
| hwIpDslamAntiIpv6Status Used for setting or querying the anti-IPv6-attack status.
Options:
1. enabled(1) -indicates the anti-IPv6-attack status is enabled
2. disabled(2) -indicates the anti-IPv6-attack … | scalar | EnabledStatus | .1.3.6.1.4.1.2011.6.47.73 |
| hwIpDslamAntiIcmpv6Status Used for setting or querying the anti-ICMPv6-attack status.
Options:
1. enabled(1) -indicates the anti-ICMPv6-attack status is enabled
2. disabled(2) -indicates the anti-ICMPv6-a… | scalar | EnabledStatus | .1.3.6.1.4.1.2011.6.47.74 |
| hwCableSystemIPv4SourceVerify Indicates IPv4 Source Address Verification (SAV) function for CM configured policies.
Options:
1. enable(1) -indicates that the IPv4 Source Address Verification for CM configured… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.47.75 |
| hwIpDslamAntiIllegalHopLimitNDStatus Used for setting or querying the anti-illegal-hoplimit-nd status.
Options:
1. enabled(1) -indicates the anti-illegal-hoplimit-nd status is enabled
2. disabled(2) -indicates the a… | scalar | EnabledStatus | .1.3.6.1.4.1.2011.6.47.76 |
| hwIpDslamArpUnicastTable This table is used to create static entries for network-side ARP broadcast-to-unicast conversion.
To transmit an ARP request packet with a specified target IP address received on… | table | - | .1.3.6.1.4.1.2011.6.47.77 |
| hwIpDslamIpOptionPacketPolicy Used for setting or querying the ip option packet-policy.
Options:
1. tocpu(1) -indicates the ip option packet-policy is to cpu
2. forward(2) -indicates the ip option packet-pol… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.47.78 |
| hwIpDslamAntiDosTtlExceedPacketRate Used for setting or querying the threshold for the rate of sending ttl-exceeded packets to the CPU.
The value -1 indicates that the threshold for the rate of sending ttl-exceeded … | scalar | Integer32 | .1.3.6.1.4.1.2011.6.47.79 |
| hwIpDslamIpAddrDynamicBindingTable It is the table for the dynamic binding between the IP address and the service port
and is used for querying the entry of the dynamic binding between the IP address and
the servic… | table | - | .1.3.6.1.4.1.2011.6.47.8 |
| hwIpDslamAntiDosOversizePacketRate Used for setting or querying the threshold for the rate of sending oversize packets to the CPU.
The value -1 indicates that the threshold for the rate of sending oversize packets … | scalar | Integer32 | .1.3.6.1.4.1.2011.6.47.80 |
| hwIpDslamAntiIpv6ExcludeSwitch Used to specify the type of the packet that is not affected by anti-IPv6-spoofing.
Options:
1. mld(0) -indicates that anti-IPv6-spoofing is invalid for MLD packets
Default: 0x00 | scalar | Bits | .1.3.6.1.4.1.2011.6.47.81 |
| hwIpDslamSecurityUserAutoBackupFileName Used for setting or querying the security user auto-backup filename.
The value STRING(0) indicates that the configured security user auto-backup filename is cleared.
Range: 1-64 c… | scalar | OctetString | .1.3.6.1.4.1.2011.6.47.82 |
| hwIpDslamSecurityUserDynamicIpv6 Indicates whether the security user dynamic-ipv6 function is enabled.
Options:
1. enable(1) -indicates that the security user dynamic-ipv6 function is enabled.
2. disable(2) -ind… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.47.83 |
| hwIpDslamAntiDosDhcpPacketLimitPeriod Indicates the detection period of anti-DoS-attack for DHCP packet to cpu.
Range: 1-1800
Unit: second
Default: 1 | scalar | second Integer32 | .1.3.6.1.4.1.2011.6.47.84 |
| hwIpDslamArpDetectMaxUserCountSwitch Indicates whether the arp-detect max-user-count function is enabled.
Options:
1. enable(1) -indicates that the arp-detect max-user-count function is enabled.
2. disable(2) -indic… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.47.85 |
| hwIpDslamSecurityUserInfoSwitch Indicates whether the security user info function is enabled.
Options:
1. enable(1) -indicates that the security user info function is enabled.
2. disable(2) -indicates that the … | scalar | Enumeration | .1.3.6.1.4.1.2011.6.47.86 |
| hwIpDslamSecurityFlowBundleOutboundPolicy Indicates the outbound policy of service port bundle.
Options:
1. record(1) -indicates that the outbound policy is record.
2. priority(2) -indicates that the outbound policy is p… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.47.87 |
| hwIpDslamDosBlackListTable Used for querying or deleting the entry of the current blacklist in the system.
The index of this table is hwIpDslamDosBlackListIndex, which uniquely identifies
an entry of the bl… | table | - | .1.3.6.1.4.1.2011.6.47.9 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwIpDslamAntiBcAttackOntQueryEntry Indicates the information of the ONT, which occurred the broadcast-attack.
The indexes of this entry are hwIpDslamAntiBcAttackOntQueryIfIndex and hwIpDslamAntiBcAttackOntQueryOntI… | row | - | .1.3.6.1.4.1.2011.6.47.58.1 |