hwMstpiPortState
HUAWEI-IPDSLAM-MSTP-MIB ·
.1.3.6.1.4.1.2011.5.25.42.4.1.20.1.2
Object
column
Enumeration
Indicates the port status.
Options:
1. disabled(1) -indicates the port is disabled
2. discarding(2) -indicates the port is discarding. During this phase,
port can only receive and process BPDU data packet,
not forward traffic, root bridge, root port, and specified
port will be voted
3. learning(4) -indicates the port is learning. During this phase,
bridge will create MAC address table according the
received traffic, but not forward traffic
4. forwarding(5) -indicates traffic forward
Context
- MIB
- HUAWEI-IPDSLAM-MSTP-MIB
- OID
.1.3.6.1.4.1.2011.5.25.42.4.1.20.1.2- Type
- column
- Access
- readonly
- Status
- current
- Parent
- hwMstpPortEntry
- Table
- hwMstpPortTable
- Siblings
- 25
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | disabled |
2 | discarding |
4 | learning |
5 | forwarding |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwMstpiPortIndex It is an index and indicates a bridge port. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.42.4.1.20.1.1 |
| hwMstpiStpPortPointToPoint Indicates whether the current port is a point-to-point port.
Options:
1. forceTrue(1) -indicates the current port is a point-to-point port
2. forceFalse(2) -indicates the curren… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.42.4.1.20.1.10 |
| hwMstpiStpMcheck Indicates the mcheck parameter of the bridge port.
Options:
1. enable(1) -indicates the mcheck parameter of the bridge port is enabled
2. unused(65535) -indicates the mcheck … | column | Enumeration | .1.3.6.1.4.1.2011.5.25.42.4.1.20.1.11 |
| hwMstpiStpTransLimit Indicates the maximum number of BPDUs that can be transmitted within the hello time.
Range: 1-255
Default: 3 | column | Integer32 | .1.3.6.1.4.1.2011.5.25.42.4.1.20.1.12 |
| hwMstpiStpRXStpBPDU Indicates the number of BPDUs received by the port. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.5.25.42.4.1.20.1.13 |
| hwMstpiStpTXStpBPDU Indicates the number of BPDUs transmitted by the port. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.5.25.42.4.1.20.1.14 |
| hwMstpiStpRXTCNBPDU Indicates the number of TCN BPDUs received by the port. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.5.25.42.4.1.20.1.15 |
| hwMstpiStpTXTCNBPDU Indicates the number of TCN BPDUs transmitted by the port. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.5.25.42.4.1.20.1.16 |
| hwMstpiStpRXRSTPBPDU Indicates the number of RST BPDUs received by the port. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.5.25.42.4.1.20.1.17 |
| hwMstpiStpTXRSTPBPDU Indicates the number of RST BPDUs transmitted by the port. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.5.25.42.4.1.20.1.18 |
| hwMstpiStpRXMSTPBPDU Indicates the number of MST BPDUs received by the port. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.5.25.42.4.1.20.1.19 |
| hwMstpiStpTXMSTPBPDU Indicates the number of MST BPDUs transmitted by the port. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.5.25.42.4.1.20.1.20 |
| hwMstpiStpClearStatistics Indicates whether to clear the statistics.
Options:
1. clear(1) -indicates the statistics is cleared
2. unused(65535) -indicates the statistics is not cleared | column | Enumeration | .1.3.6.1.4.1.2011.5.25.42.4.1.20.1.21 |
| hwMstpiStpDefaultPortCost Indicates whether to restore the default port cost.
Options:
1. reset(1) -indicates the default port cost is restored
2. unused(65535) -indicates the default port cost is no… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.42.4.1.20.1.22 |
| hwMstpiStpStatus Indicates whether STP is enabled on the port.
Options:
1. enabled(1) -indicates STP is enabled on the port
2. disabled(2) -indicates STP is not enabled on the port
Default: enab… | column | HwMSTPEnabledStatus | .1.3.6.1.4.1.2011.5.25.42.4.1.20.1.23 |
| hwMstpiPortRootGuard Indicates whether root protection is enabled on the port.
Options:
1. enabled(1) -indicates root protection is enabled on the port
2. disabled(2) -indicates root protection is d… | column | HwMSTPEnabledStatus | .1.3.6.1.4.1.2011.5.25.42.4.1.20.1.24 |
| hwMstpiPortLoopGuard Indicates whether loop protection is enabled on the port.
Options:
1. enabled(1) -indicates loop protection is enabled on the port
2. disabled(2) -indicates loop protection is d… | column | HwMSTPEnabledStatus | .1.3.6.1.4.1.2011.5.25.42.4.1.20.1.25 |
| hwMstpiPortCompliance Indicates the MSTP compliance type of the current port.
Options:
1. auto(1) -indicates the MSTP compliance type of the current port is auto
2. dot1w(2) -indicates the MSTP compl… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.42.4.1.20.1.26 |
| hwMstpiPortPriority Indicates the port priority.
Range: 0-240
Default: 128
Step: 16 | column | Integer32 | .1.3.6.1.4.1.2011.5.25.42.4.1.20.1.3 |
| hwMstpiPortPathCost Indicates the path cost of the port.
The value range of this leaf is relevant to hwMstpPathCostStandard.
Range: 1-65535 (The 802.1d-1998 protocol is used as the computing standard… | column | Integer32 | .1.3.6.1.4.1.2011.5.25.42.4.1.20.1.4 |
| hwMstpiDesignatedRoot The Bridge Identifier of the Root Bridge for the port of the Spanning Tree instance identified by the MSTID.
The format of the bridge ID is bridge priority (2B) + bridge MAC addre… | column | OctetString | .1.3.6.1.4.1.2011.5.25.42.4.1.20.1.5 |
| hwMstpiDesignatedCost Indicates the cost of the path from the port to the root bridge. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.42.4.1.20.1.6 |
| hwMstpiDesignatedBridge Indicates the designated bridge.
The format of the bridge ID is bridge priority (2B) + bridge MAC address (6B).
For example, if the bridge priority is 32768, and the bridge MAC ad… | column | OctetString | .1.3.6.1.4.1.2011.5.25.42.4.1.20.1.7 |
| hwMstpiDesignatedPort Indicates the designated port.
The format of the port ID is port priority (1B) + port number (1B).
For example, if the port priority is 128, and the port number is 1, then the por… | column | OctetString | .1.3.6.1.4.1.2011.5.25.42.4.1.20.1.8 |
| hwMstpiStpPortEdgeport Indicates whether the current port is an edge port.
Options:
1. enabled(1) -indicates the current port is an edge port
2. disabled(2) -indicates the current port is not an edge … | column | HwMSTPEnabledStatus | .1.3.6.1.4.1.2011.5.25.42.4.1.20.1.9 |