hwAclv6BasicSrcIpAddressPrefixLength
HUAWEI-IPDSLAM-ACLV6-MIB ·
.1.3.6.1.4.1.2011.5.112.1.2.1.6
Object
Describes source IP address prefix length of the rule.
Denotes the length of a generic Internet network address prefix.
A value of n corresponds to an IP address mask
that has n contiguous 1-bits from the most significant
bit (MSB), with all other bits set to 0.
An InetAddressPrefixLength value is always interpreted within
the context of an InetAddressType value. Every usage of the
InetAddressPrefixLength textual convention is required to
specify the InetAddressType object that provides the
context. It is suggested that the InetAddressType object be
logically registered before the object(s) that use the
InetAddressPrefixLength textual convention, if they appear
in the same logical row.
InetAddressPrefixLength values larger than
the maximum length of an IP address for a specific
InetAddressType are treated as the maximum significant
value applicable for the InetAddressType. The maximum
significant value is 32 for the InetAddressType
'ipv4(1)' and 'ipv4z(3)' and 128 for the InetAddressType
'ipv6(2)' and 'ipv6z(4)'. The maximum significant value
for the InetAddressType 'dns(16)' is 0.
The value zero is object-specific and must be defined as
part of the description of any object that uses this
syntax. Examples of the usage of zero might include
situations where the Internet network address prefix
is unknown or does not apply.
The upper bound of the prefix length has been chosen to
be consistent with the maximum size of an InetAddress.
Context
- MIB
- HUAWEI-IPDSLAM-ACLV6-MIB
- OID
.1.3.6.1.4.1.2011.5.112.1.2.1.6- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwAclv6BasicRuleEntry
- Table
- hwAclv6BasicRuleTable
- Siblings
- 11
Syntax
INET-ADDRESS-MIBInetAddressPrefixLength
- Source
- INET-ADDRESS-MIBInetAddressPrefixLength
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..2040
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwAclv6BasicAclNum Uniquely identifies a basic ACLv6 group.
Range: 2000-2999
Make sure that the ID of the ACLv6 group is already created in hwAclv6NumGroupTable. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.112.1.2.1.1 |
| hwAclv6BasicCountClear Clears the statistics of packets that match the rule.
Options:
1. cleared(1) -clear the statistics of packets that match the basic ACL rules
2. nouse(2) -indicates no operation
… | column | Enumeration | .1.3.6.1.4.1.2011.5.112.1.2.1.10 |
| hwAclv6BasicPriority Describes the priority of a rule.
Range: 0-9
Default: 0
The priority ascends with the value.
When multiple rules are matched at the same time, the rule with the hi… | column | Integer32 | .1.3.6.1.4.1.2011.5.112.1.2.1.11 |
| hwAclv6BasicRowStatus Indicates the row status.
Options:
1. active(1) -when this leaf is queried, the value is fixed to active(1).
2. createAndGo(4) -create a basic ACLv6 rule
3. destroy(6) -d… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.5.112.1.2.1.12 |
| hwAclv6BasicSubitem Describes the ID of a basic ACLv6 rule in the basic ACLv6 group, uniquely identifying a basic ACLv6 rule.
Range: 0-4294967295
In the create operation, if the value… | column | Unsigned32 | .1.3.6.1.4.1.2011.5.112.1.2.1.2 |
| hwAclv6BasicAct Describes the action of a rule.
Options:
1. permit(1) -indicates that the data packets that meet the conditions can pass
2. deny(2) -indicates that the data packets that meet … | column | Enumeration | .1.3.6.1.4.1.2011.5.112.1.2.1.3 |
| hwAclv6BasicSrcIpAddressType Describes the ip-address type of the rule.
The value represents a type of Internet address.
Options:
1. unknown(0) -An unknown address type. This value must be use… | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.2011.5.112.1.2.1.4 |
| hwAclv6BasicSrcIpAddress Describes source IP address of the rule.
Denotes a generic Internet address.
An InetAddress value is always interpreted within the context
of an InetAddressType val… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.2011.5.112.1.2.1.5 |
| hwAclv6BasicTimeRangeName Describes the time range name of a rule.
It is used when the effective time of a rule needs to be configured.
If hwAclv6BasicTimeRangeName is not set, the rule is valid all the … | column | OctetString | .1.3.6.1.4.1.2011.5.112.1.2.1.7 |
| hwAclv6BasicEnable Describes whether the rule is valid.
Options:
1. true(1) -the rule is valid
2. false(2) -the rule is invalid
If the rule is associated with a time range parameter through hwAclv… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.112.1.2.1.8 |
| hwAclv6BasicCount Describes the statistics of packets that match the rule. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.5.112.1.2.1.9 |