hwIFExtFlushVlanId
HUAWEI-IF-EXT-MIB ·
.1.3.6.1.4.1.2011.5.25.41.1.1.1.1.6
Object
The ID of Vlan the port belongs to.When it is 0, it indicates the function of receiving FlushPDU is disabled.
Context
- MIB
- HUAWEI-IF-EXT-MIB
- OID
.1.3.6.1.4.1.2011.5.25.41.1.1.1.1.6- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwIFExtEntry
- Table
- hwIFExtTable
- Siblings
- 41
Syntax
Q-BRIDGE-MIBVlanIdOrNone
- Source
- Q-BRIDGE-MIBVlanIdOrNone
- Base type
Integer32
Values & Constraints
Type Constraints
range: 0..4094
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwIFExtIndex This object indicates the interface index. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.2011.5.25.41.1.1.1.1.1 |
| hwIFExtMacAddr This object indicates the MAC address of an interface. | column | SNMPv2-TCPhysAddress | .1.3.6.1.4.1.2011.5.25.41.1.1.1.1.10 |
| hwIFExtBlockPriority The blocked priority of the interface. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.41.1.1.1.1.11 |
| hwIFExtMacShift The mac-shift state of the interface.
1:normal
2:monitor mac-shift | column | Enumeration | .1.3.6.1.4.1.2011.5.25.41.1.1.1.1.12 |
| hwIFExtSuppressStatus This object indicates the suppression status of an interface.
0: The interface is not suppressed.
1: The interface is suppressed. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.41.1.1.1.1.13 |
| hwIFExtPoisonReverse Whether or not enable Split-horizon forwarding | column | EnabledStatus | .1.3.6.1.4.1.2011.5.25.41.1.1.1.1.14 |
| hwIFExtInputPktRate This object indicates the rate of the incoming packets on an interface.
The rate value is 64 bits. hwIFExtInputPktRate indicates the lower 32 bits,
while hwIFExtInputHighPktRate… | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.5.25.41.1.1.1.1.15 |
| hwIFExtInputHighPktRate This object indicates the rate of the incoming packets on an interface.
The rate value is 64 bits. hwIFExtInputPktRate indicates the lower 32 bits,
while hwIFExtInputHighPktRate… | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.5.25.41.1.1.1.1.16 |
| hwIFExtOutputPktRate This object indicates the rate of the outgoing packets on an interface.
The rate value is 64 bits. hwIFExtOutputPktRate indicates the lower 32 bits,
while hwIFExtOutputHighPktRa… | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.5.25.41.1.1.1.1.17 |
| hwIFExtOutputHighPktRate This object indicates the rate of the outgoing packets on an interface.
The rate value is 64 bits. hwIFExtOutputPktRate indicates the lower 32 bits,
while hwIFExtOutputHighPktRa… | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.5.25.41.1.1.1.1.18 |
| hwIFExtInputOctetRate This object indicates the octet rate of the incoming traffic on an interface.
The rate value is 64 bits. hwIFExtInputOctetRate indicates the lower 32 bits,
while hwIFExtInputHig… | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.5.25.41.1.1.1.1.19 |
| hwIFExtLayer This object indicates the Layer 2/Layer 3 switching flag of an interface.
According to the switching command, note the following:
When Layer2(1) is 1, the interface switches from … | column | Enumeration | .1.3.6.1.4.1.2011.5.25.41.1.1.1.1.2 |
| hwIFExtInputHighOctetRate This object indicates the octet rate of the incoming traffic on an interface.
The rate value is 64 bits. hwIFExtInputOctetRate indicates the lower 32 bits,
while hwIFExtInputHig… | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.5.25.41.1.1.1.1.20 |
| hwIFExtOutputOctetRate This object indicates the octet rate of the outgoing traffic on an interface.
The rate value is 64 bits. hwIFExtOutputOctetRate indicates the lower 32 bits,
while hwIFExtOutputH… | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.5.25.41.1.1.1.1.21 |
| hwIFExtOutputHighOctetRate This object indicates the octet rate of the outgoing traffic on an interface.
The rate value is 64 bits. hwIFExtOutputOctetRate indicates the lower 32 bits,
while hwIFExtOutputH… | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.5.25.41.1.1.1.1.22 |
| hwIFExtSwitchPortIndex Number of layer2 interface port, a unique value,
for each port.It is recommended that values are assigned
contiguously starting from 1. If the return value is -1, this interface … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.41.1.1.1.1.23 |
| hwIFExtSuppressStatusIPv6 The suppress state of the interface(IPv6).
0:unsuppress
1:suppress | column | Enumeration | .1.3.6.1.4.1.2011.5.25.41.1.1.1.1.24 |
| hwIFExtInputPkts The total number of packets received on the interface.
The counter value is 64 bits. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2011.5.25.41.1.1.1.1.25 |
| hwIFExtOutputPkts The total number of packets transmitted out of the interface.
The counter value is 64 bits. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2011.5.25.41.1.1.1.1.26 |
| hwIFExtInputUnicastBitRate This object indicates the bit rate of the incoming unicast traffic on an interface.
The rate value is 64 bits. | column | HCNUM-TCCounterBasedGauge64 | .1.3.6.1.4.1.2011.5.25.41.1.1.1.1.27 |
| hwIFExtOutputUnicastBitRate This object indicates the bit rate of the outgoing unicast traffic on an interface.
The rate value is 64 bits. | column | HCNUM-TCCounterBasedGauge64 | .1.3.6.1.4.1.2011.5.25.41.1.1.1.1.28 |
| hwIFExtInputMulticastBitRate This object indicates the bit rate of the incoming multicast traffic on an interface.
The rate value is 64 bits. | column | HCNUM-TCCounterBasedGauge64 | .1.3.6.1.4.1.2011.5.25.41.1.1.1.1.29 |
| hwIFExtFrameType This object indicates the type of frames that a VLAN virtual interface receives.
Frame formats include ethernetII(1), ethernetII(2), ethernet8022(3), and ethernet8023.
The value… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.41.1.1.1.1.3 |
| hwIFExtOutputMulticastBitRate This object indicates the bit rate of the outgoing multicast traffic on an interface.
The rate value is 64 bits. | column | HCNUM-TCCounterBasedGauge64 | .1.3.6.1.4.1.2011.5.25.41.1.1.1.1.30 |
| hwIFExtInputBroadcastBitRate This object indicates the bit rate of the incoming broadcast traffic on an interface.
The rate value is 64 bits. | column | HCNUM-TCCounterBasedGauge64 | .1.3.6.1.4.1.2011.5.25.41.1.1.1.1.31 |
| hwIFExtOutputBroadcastBitRate This object indicates the bit rate of the outgoing broadcast traffic on an interface.
The rate value is 64 bits. | column | HCNUM-TCCounterBasedGauge64 | .1.3.6.1.4.1.2011.5.25.41.1.1.1.1.32 |
| hwIFExtInputUnicastPktRate This object indicates the rate of the incoming unicast packets on an interface.
The rate value is 64 bits. | column | HCNUM-TCCounterBasedGauge64 | .1.3.6.1.4.1.2011.5.25.41.1.1.1.1.33 |
| hwIFExtOutputUnicastPktRate This object indicates the rate of the outgoing unicast packets on an interface.
The rate value is 64 bits. | column | HCNUM-TCCounterBasedGauge64 | .1.3.6.1.4.1.2011.5.25.41.1.1.1.1.34 |
| hwIFExtInputMulticastPktRate This object indicates the rate of the incoming multicast packets on an interface.
The rate value is 64 bits. | column | HCNUM-TCCounterBasedGauge64 | .1.3.6.1.4.1.2011.5.25.41.1.1.1.1.35 |
| hwIFExtOutputMulticastPktRate This object indicates the rate of the outgoing multicast packets on an interface.
The rate value is 64 bits. | column | HCNUM-TCCounterBasedGauge64 | .1.3.6.1.4.1.2011.5.25.41.1.1.1.1.36 |
| hwIFExtInputBroadcastPktRate This object indicates the rate of the incoming broadcast packets on an interface.
The rate value is 64 bits. | column | HCNUM-TCCounterBasedGauge64 | .1.3.6.1.4.1.2011.5.25.41.1.1.1.1.37 |
| hwIFExtOutputBroadcastPktRate This object indicates the rate of the outgoing broadcast packets on an interface.
The rate value is 64 bits. | column | HCNUM-TCCounterBasedGauge64 | .1.3.6.1.4.1.2011.5.25.41.1.1.1.1.38 |
| hwIFExtInputBitRate This object indicates the bit rate of the incoming traffic on an interface.
The rate value is 64 bits. | column | HCNUM-TCCounterBasedGauge64 | .1.3.6.1.4.1.2011.5.25.41.1.1.1.1.39 |
| hwIFExtFlowStatInterval This object indicates the interval for collecting traffic statistics for an interface. The value ranges from 0 to 600, in seconds. The default value is 300. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.41.1.1.1.1.4 |
| hwIFExtOutputBitRate This object indicates the bit rate of the outgoing traffic on an interface.
The rate value is 64 bits. | column | HCNUM-TCCounterBasedGauge64 | .1.3.6.1.4.1.2011.5.25.41.1.1.1.1.40 |
| hwIFExtDampStatus This object indicates the physical suppression status of an interface.
0: The interface is not suppressed.
1: The interface is suppressed. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.41.1.1.1.1.41 |
| hwIFExtPhyStatusUpTime This object indicates the accumulated time in seconds during which the physical status of the interface remains up after its creation. | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.41.1.1.1.1.42 |
| hwIFExtFlushReceiveEnable Whether or not permit the port to take over FLUSHDUs. Once it is enabled,
the port will take over SmartLink FlushDUs from related vlans so as to delete
the MAC forwarding table in… | column | EnabledStatus | .1.3.6.1.4.1.2011.5.25.41.1.1.1.1.5 |
| hwIFExtFlushPasswd A 16-octet read-write value used to define the password for negotiation. | column | SnmpPasswdString | .1.3.6.1.4.1.2011.5.25.41.1.1.1.1.7 |
| hwIFExtFlowStatus This object indicates the traffic status of an interface. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.41.1.1.1.1.8 |
| hwIFExtMtu This object indicates the MTU of an interface.
The MTU value varies according to interface types. The default MTU value also varies.
The MTU value can be modified. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.41.1.1.1.1.9 |