hwOntCfmMepIsIphost
HUAWEI-ETHERNET-OAM-MIB ·
.1.3.6.1.4.1.2011.5.101.1.22.1.4
Object
Indicates the port type of the MEP. Options: 1. true(1) -indicates the IPHOST port 2. false(2) -indicates the ETH port
Context
- MIB
- HUAWEI-ETHERNET-OAM-MIB
- OID
.1.3.6.1.4.1.2011.5.101.1.22.1.4- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwOntCfmMepEntry
- Table
- hwOntCfmMepTable
- Siblings
- 37
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwOntCfmMepId Indicates the MEP index.
Range: 1-8191 | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.101.1.22.1.1 |
| hwOntCfmMepCcmLtmPriority Indicates the level of CCMs/LTMs sent by the MEP.
Range: 0-7
Default: 7 | column | Unsigned32 | .1.3.6.1.4.1.2011.5.101.1.22.1.10 |
| hwOntCfmMepCcmRemoteMepid Indicates the Remote MEP index of the MEP.
Range: 1-8191 | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.101.1.22.1.11 |
| hwOntCfmMepMacAddress Indicates the MAC address of the MEP. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.2011.5.101.1.22.1.12 |
| hwOntCfmMepRowStatus Indicates the row status of the MEP.
Options:
1. active(1) -indicates the query operation
2. createAndGo(4) -indicates the creating operation
3. destroy(6) -indicates the… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.5.101.1.22.1.13 |
| hwOntCfmMepRunStatus Indicates the run status of the MEP.
1. true(1) -indicates the MEP run status is up
2. false(2) -indicates the MEP run status is down | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.101.1.22.1.14 |
| hwOntCfmMepHighestPrDefect Indicates the highest defect priority of the MEP.
Options:
1.none(0) -indicates no defects
2.defRDICCM(1) -indicates the RDI defect
3.defMACstatus(2… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.101.1.22.1.15 |
| hwOntCfmMepDefects Indicates the defect status of the MEP.
Options:
1. bDefRDICCM(0) -indicates the RDI defect
2. bDefMACStatus(1) -indicates the port status defect
3. bDefRemoteC… | column | Bits | .1.3.6.1.4.1.2011.5.101.1.22.1.16 |
| hwOntCfmMepLowPrDef Indicates the lowest defect priority of the MEP.
Range: 1-6
Default: 2 | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.101.1.22.1.17 |
| hwOntCfmMepIfTriggerType Indicates the trigger function type of the MEP port.
Options:
1. down(1) -indicates that the port will be deactivated when trigger-if-down is enabled
2. disable(255) -indic… | column | Enumeration | .1.3.6.1.4.1.2011.5.101.1.22.1.18 |
| hwOntCfmMepTriggerPriority Indicates the lowest alarm priority to enable trigger-if-down.
Range: -1,1-5
Default: 2
-1 indicates an invalid value for trigger-if-down priority. | column | Integer32 | .1.3.6.1.4.1.2011.5.101.1.22.1.19 |
| hwOntCfmMepIfIndex Indicates the flag of port bound to the MEP, and the value is obtained through
the ifIndex algorithm according to the shelf ID, slot ID, and port ID.
-1 indicates an invalid value… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.101.1.22.1.2 |
| hwOntCfmMepFngAlarmTime Indicates the alarm waiting time of the MEP, in the unit of millisecond.
Range: 2500-10000
Unit: millisecond
Default: 2500 | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.101.1.22.1.20 |
| hwOntCfmMepFngResetTime Indicates the recovery alarm waiting time of the MEP, in the unit of millisecond.
Range: 2500-10000
Unit: millisecond
Default: 10000 | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.101.1.22.1.21 |
| hwOntCfmMepAISStatus Indicates whether the AIS packet sending function is enabled.
Options:
1. enable(1) -Indicates that the AIS packet sending function is enabled
2. disable(2) -Indicates that the A… | column | Enumeration | .1.3.6.1.4.1.2011.5.101.1.22.1.22 |
| hwOntCfmMepRdiLowestAlarmPri Indicates the lowest alarm priority of generating the RDI.
Range: 2-6
Default: 2 | column | Integer32 | .1.3.6.1.4.1.2011.5.101.1.22.1.23 |
| hwOntCfmMepIgnoreTLV Indicates the TLV that MEP ignores when receiving CCM packets.
Options:
1.bDefInterfaceStatusTLV(0) -indicates the Interface Status TLV
Other bits are reserved. For each bit, 1 i… | column | Bits | .1.3.6.1.4.1.2011.5.101.1.22.1.24 |
| hwOntCfmMepTransmitLbmDestMepId Indicates the ID of the destination MEP that performs LB. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.101.1.22.1.25 |
| hwOntCfmMepTransmitLbmDestMacAddress Indicates the destination MAC address of LB performed by the MEP. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.2011.5.101.1.22.1.26 |
| hwOntCfmMepTransmitLbmDestIsMepId Indicates whether LB is performed by an MEP ID.
Options:
1. invalid(0) -indicates invalide value
2. true(1) -indicates LB is performed by an MEP ID
3. false(2) -indicates LB … | column | Enumeration | .1.3.6.1.4.1.2011.5.101.1.22.1.27 |
| hwOntCfmMepTransmitLbmDataLength Indicates the length (length of tlv value) for datatlv of the LBM sent by a MEP.
Unit: byte
Range: 0-1500 | column | Integer32 | .1.3.6.1.4.1.2011.5.101.1.22.1.28 |
| hwOntCfmMepTransmitLbmPriority Indicates the priority of the LBM sent by the MEP in the LB diagnostic test.
Range: 0-7
The default value is the Tx priority of the CCM. | column | Integer32 | .1.3.6.1.4.1.2011.5.101.1.22.1.29 |
| hwOntCfmMepOntid Indicates the ONT ID of the XPON port. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.101.1.22.1.3 |
| hwOntCfmMepTransmitLbmMessages Indicates the number of LBMs sent by the MEP in LB. | column | Integer32 | .1.3.6.1.4.1.2011.5.101.1.22.1.30 |
| hwOntCfmMepTransmitLbmInterval Indicates the interval of the LBMs are sent by a MEP.
Unit: second
Range: 0-60
Default: 0 | column | second Integer32 | .1.3.6.1.4.1.2011.5.101.1.22.1.31 |
| hwOntCfmMepTransmitLbmTerminate Means to stop sending LBMs.
Options:
1. invalid(-1) -indicates invalide value
2. terminate(1) -indicates stop sending LBMs | column | Enumeration | .1.3.6.1.4.1.2011.5.101.1.22.1.32 |
| hwOntCfmMepLbrIn Indicates the number of correct LBRs received by the MEP. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.5.101.1.22.1.33 |
| hwOntCfmMepLbrInOutOfOrder Indicates the number of LBRs with incorrect SNs received by the MEP. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.5.101.1.22.1.34 |
| hwOntCfmMepTransmitLtmTargetIsMepId Indicates whether LT is performed by an MEP ID.
Options:
1. invalid(0) -indicates invalid value
2. true(1) -indicates LT is performed by an MEP ID
3. false(2) -indicates LT i… | column | Enumeration | .1.3.6.1.4.1.2011.5.101.1.22.1.35 |
| hwOntCfmMepTransmitLtmTargetMacAddress Indicates the MAC address of the LTM sent by the MEP. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.2011.5.101.1.22.1.36 |
| hwOntCfmMepTransmitLtmTargetMepId Indicates the target MEP ID in the LTM sent by the MEP. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.101.1.22.1.37 |
| hwOntCfmMepTransmitLtmTtl Indicates the TTL in the transmitted TLM for LT that is performed by the MEP.
Range: 0-255
Default: 64 | column | Unsigned32 | .1.3.6.1.4.1.2011.5.101.1.22.1.38 |
| hwOntCfmMepEthPortId Indicates the ETH port ID of the MEP.
-1 indicates an invalid value for ETH port ID. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.101.1.22.1.5 |
| hwOntCfmMepDirection Indicates the MEP direction.
Options:
1. down(1) -indicates the MEP direction is down
2. up(2) -indicates the MEP direction is up | column | IEEE8021-CFM-MIBDot1agCfmMpDirection | .1.3.6.1.4.1.2011.5.101.1.22.1.6 |
| hwOntCfmMepVlanid Indicates the VLAN ID of the MEP.
65534 indicates that the MEP is not associated with any VLAN.
65535 indicates that the MEP is unaware of VLAN. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.101.1.22.1.7 |
| hwOntCfmMepActive Indicates the enable status of the MEP.
Options:
1. true(1) -indicates the MEP is enabled
2. false(2) -indicates the MEP is disabled
Default: true(1) | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.101.1.22.1.8 |
| hwOntCfmMepCciEnabled Indicates the CC message sending function status of the MEP.
Options:
1. true(1) -indicates the CC message sending function of the MEP is enabled
2. false(2) -indicates the CC me… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.101.1.22.1.9 |