hwEntityVoltageFatalHighThreshold
HUAWEI-ENTITY-EXTENT-MIB ·
.1.3.6.1.4.1.2011.5.25.31.1.1.1.1.67
Object
The fatal high threshold of the voltage. Generally, the voltage should be greater than the fatal low threshold and lower than the fatal high threshold. If the voltage is greater than the fatal high threshold, a notification is sent.
Context
- MIB
- HUAWEI-ENTITY-EXTENT-MIB
- OID
.1.3.6.1.4.1.2011.5.25.31.1.1.1.1.67- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwEntityStateEntry
- Table
- hwEntityStateTable
- Siblings
- 73
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwEntityAdminStatus This object indicates the entity management status. | column | HwAdminState | .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.1 |
| hwEntityUpTime This object indicates the total duration when an entity is in the UP state. | column | seconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.10 |
| hwEntityTemperature This object indicates the entity temperature. Unit: centigrade | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.11 |
| hwEntityTemperatureThreshold This object indicates the upper threshold of the entity temperature. Unit: centigrade | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.12 |
| hwEntityVoltage This object indicates the entity voltage. Unit: mV | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.13 |
| hwEntityVoltageLowThreshold This object indicates the minimum entity voltage threshold. Unit: mV | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.14 |
| hwEntityVoltageHighThreshold This object indicates the maximum entity voltage threshold. Unit: mV | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.15 |
| hwEntityTemperatureLowThreshold This object indicates the lower entity temperature threshold. Unit: centigrade | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.16 |
| hwEntityOpticalPower This object indicates the optical module's optical power. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.17 |
| hwEntityCurrent This object indicates the entity current. | column | mA SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.18 |
| hwEntityMemSizeMega This object indicates the size of the entity SDRAM. | column | M bytes SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.19 |
| hwEntityOperStatus This object indicates the entity operation status. | column | HwOperState | .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.2 |
| hwEntityPortType This object indicates the port type. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.20 |
| hwEntityDuplex This object indicates the duplex mode of a port. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.21 |
| hwEntityOpticalPowerRx This object indicates the receive power of an optical module. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.22 |
| hwEntityCpuUsageLowThreshold This object indicates the CPU usage threshold of an entity. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.23 |
| hwEntityBoardPower This object indicates the board power. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.24 |
| hwEntityCpuFrequency The frequency of the entity. Unit: Hz | column | Hz SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.25 |
| hwEntitySupportFlexCard It describes whether the whole board supports flexible cards. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.26 |
| hwEntityBoardClass This object indicates the board type. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.27 |
| hwNseOpmStatus OPM status. 0: pass, 1: bypass, 2: invalid | column | Integer32 | .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.28 |
| hwEntityCpuMaxUsage This object indicates the maximum CPU usage. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.29 |
| hwEntityStandbyStatus This object indicates the entity backup status. | column | HwStandbyStatus | .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.3 |
| hwEntityCPUType This object indicates the CPU type. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.30 |
| hwEntityMemoryType This object indicates the memory type. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.31 |
| hwEntityFlashSize This object indicates the flash size of an entity. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.32 |
| hwEntityIfUpTimes Times that the interface goes Up. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.33 |
| hwEntityIfDownTimes Times that the interface goes Down. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.34 |
| hwEntityCPUAvgUsage This object indicates the average CPU usage. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.35 |
| hwEntityMemoryAvgUsage This object indicates the average memory usage. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.36 |
| hwEntityMemUsed This object indicates the used memory size. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.37 |
| hwEntityTotalFanNum The total numbers of the fans in the chassis . | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.38 |
| hwEntityNomalFanNum The Nomal numbers of the fans in the chassis . | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.39 |
| hwEntityAlarmLight This object indicates the entity alarm status, which is consistent with the entity alarm indicator status. | column | HwAlarmStatus | .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.4 |
| hwEntityTotalPwrNum The total numbers of the powers in the chassis . | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.40 |
| hwEntityNomalPwrNum The nomal numbers of the powers in the chassis . | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.41 |
| hwEntityFaultLight The repair status for this entity.
On the underrepair condition, there is a blue light on the entity. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.42 |
| hwEntityBoardName The board name for this entity. | column | OctetString | .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.43 |
| hwEntityBoardDescription The board description for this entity. | column | OctetString | .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.44 |
| hwEntity5MinCpuUsage Average CPU usage of the last five minutes for this entity. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.45 |
| hwEntityStartMode This object indicates the board startup mode. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.46 |
| hwEntitySplitAttribute Number of the split port. | column | OctetString | .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.47 |
| hwEntityFaultLightKeepTime Fault light twinkle keep time,the default is 45 seconds. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.48 |
| hwEntityPbufUsage The Pbuf usage for this entity. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.49 |
| hwEntityCpuUsage This object indicates the CPU usage of an entity. Generally, the overall CPU usage of the entity is calculated, without considering the number of CPUs on the entity. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.5 |
| hwEntityTMUsage The TM usage for this entity. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.50 |
| hwEntityHda1Usage The Hda1 usage for this entity. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.51 |
| hwEntityHda1UsageThreshold The hda1 usage Threshold for this entity. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.52 |
| hwEntityHda1UsageResumeThreshold The hda1 usage resume threshold for this entity. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.53 |
| hwEntitySlotID The identification of slot. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.54 |
| hwEntityCpuID The identification of cpu. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.55 |
| hwEntityPreviousValue The previous value of the sudden change. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.56 |
| hwEntityCurrentValue The current value of the sudden change. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.57 |
| hwEntityChangeValue The change of the sudden change. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.58 |
| hwEntityChangeValueThreshold The change threshold. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.59 |
| hwEntityCpuUsageThreshold This object indicates the CPU usage threshold. When the CPU usage exceeds the threshold, a notification is sent. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.6 |
| hwEntityModelName The model for this entity. If there is no model string in elable of this entity or this entity does not support elabel, the invalid value(zero-string) will be returned. | column | OctetString | .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.60 |
| hwEntityIssueNumber The IssueNumber for this entity. If there is no IssueNumber string in elable of this entity or this entity does not support elabel, the invalid value(zero-string) will be returned. | column | OctetString | .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.61 |
| hwEntityDeviceStatus This object indicates the state of the device. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.62 |
| hwEntityPicStatus This object indicates the state of the pic. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.63 |
| hwEntityMPUType This object indicates the MPU type. | column | OctetString | .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.64 |
| hwEntityMemSizeExt This object indicates the memory size. | column | KByte SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.65 |
| hwEntityTemperatureMinorThreshold The minor threshold of the temperature. If the device temperature is
higher than the threshold, a notification is sent. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.66 |
| hwEntityVoltageFatalLowThreshold The fatal low threshold of the voltage. Generally, the voltage should
be greater than the fatal low threshold and lower than the fatal high threshold.
If the voltage is lower th… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.68 |
| hwEntityMemCacheUsage This object indicates the memory cache usage of an entity, that is, the percentage of the memory cache that has been used. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.69 |
| hwEntityMemUsage This object indicates the memory usage of an entity, that is, the percentage of the memory that has been used. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.7 |
| hwCpuUsageTrapType This object indicates the forwarding type of an entity. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.70 |
| hwCpuUsageTrapSlot This object indicates the slot id of an entity. | column | OctetString | .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.71 |
| hwCpuUsageTrapCpu This object indicates the CPU id of an entity. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.72 |
| hwCpuUsageCurrentUsage This object indicates the cpu usage of an entity, that is, the percentage of the cpu resource that has been used. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.73 |
| hwCpuUsageThreashold This object indicates the cpu usage threshold of an entity. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.74 |
| hwEntityMemUsageThreshold This object indicates the memory usage threshold. When the memory usage exceeds the threshold, a notification is sent. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.8 |
| hwEntityMemSize This object indicates the memory size. | column | bytes SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.9 |