hwEntPstnUserVQEAgcLevel
HUAWEI-ENT-VOICE-SIPAGUSER-MIB ·
.1.3.6.1.4.1.2011.5.25.251.1.1.15
Object
column
r/w
Integer32
Indicates set AGC target value. 0..15 corresponding to -9..-24dbm0. Default: 13(-22dbm0)
Context
- MIB
- HUAWEI-ENT-VOICE-SIPAGUSER-MIB
- OID
.1.3.6.1.4.1.2011.5.25.251.1.1.15- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwEntPstnUserConfigEntry
- Table
- hwEntPstnUserConfigTable
- Siblings
- 22
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-15
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwEntPstnUserName Indicates the user's name. | column | OctetString | .1.3.6.1.4.1.2011.5.25.251.1.1.1 |
| hwEntPstnUserFSKDelayInterval Indicates the FSK delay interval.
Default: 80
Unit: 10ms | column | Integer32 | .1.3.6.1.4.1.2011.5.25.251.1.1.10 |
| hwEntPstnUserCidTransSequence Indicates the time for delivering the caller ID.
Options:
afterRing(1) -transmit CID after ringing
beforeRing(2) -transmit CID before ringing
Default: afterRing(1) | column | Enumeration | .1.3.6.1.4.1.2011.5.25.251.1.1.11 |
| hwEntPstnUserCidFormat Indicates the format of the caller ID.
Options:
1. sdmfFsk(1) -SDMF FSK format
2. mdmfFsk(2) -MDMF FSK format
3. dtmf(3) -DTMF format
4. r15(4) -R15 format
5. etsi… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.251.1.1.12 |
| hwEntPstnUserVQEAgc Indicates enable AGC or not.
Options:
enable(1)
disable(2)
Default: disable(2) | column | Enumeration | .1.3.6.1.4.1.2011.5.25.251.1.1.13 |
| hwEntPstnUserVQESns Indicates enable SNS or not.
Options:
1. enable(1)
2. disable(2)
Default: disable(2) | column | Enumeration | .1.3.6.1.4.1.2011.5.25.251.1.1.14 |
| hwEntPstnUserVQESnsLevel Indicates set VQE noise suppression level.
Default: 12
Unit: db | column | Integer32 | .1.3.6.1.4.1.2011.5.25.251.1.1.16 |
| hwEntPstnUserDspInputGain Indicates Dsp input gain.
0..15 corresponding to -10..5db.
Default: 10(0db) | column | Integer32 | .1.3.6.1.4.1.2011.5.25.251.1.1.17 |
| hwEntPstnUserDspOutputGain Indicates Dsp output gain.
0..20 corresponding to -10..10db.
Default: 10(0db) | column | Integer32 | .1.3.6.1.4.1.2011.5.25.251.1.1.18 |
| hwEntPstnUserDetectANSbarBySingleTone Indicates the flag of ANSbar signal detected by SingleTone.
Options:
1. enable(1) -the ANSbar signal detected by SingleTone is supported
2. disable(2) -the ANSbar signal detec… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.251.1.1.19 |
| hwEntPstnUserPort Indicates the user's port.
Bits 31-30 (2 bits): reserved.
Bits 29-20 (10 bits): slot index.
Bits 19-10 (10 bits): subcard index.
Bits 9-0 (10 bits): port index. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.251.1.1.2 |
| hwEntPstnUserBellANS Indicates the flag of Bell ANS.
Options:
1. enable(1) -the Bell ANS is supported
2. disable(2) -the Bell ANS is not supported
Default: disable(2) | column | Enumeration | .1.3.6.1.4.1.2011.5.25.251.1.1.20 |
| hwEntPstnUserDspParaTemplate Indicates the index of dsp parameter template name. | column | OctetString | .1.3.6.1.4.1.2011.5.25.251.1.1.21 |
| hwEntPstnUserCidFskMode Indicates the mode of fsk.
Options:
bell202(1) -bell 202
ccittV23(2) -ccitt v23
ntt(3) -ntt
Default: bell202(1) | column | Enumeration | .1.3.6.1.4.1.2011.5.25.251.1.1.22 |
| hwEntPstnUserCidTasPattern Indicates the mode of tas.
Options:
1. noTas(1) -NO TAS
2. dtAs(2) -DT AS
Default: noTas(1) | column | Enumeration | .1.3.6.1.4.1.2011.5.25.251.1.1.23 |
| hwEntPstnUserMgId Indicates the sipag ID. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.251.1.1.3 |
| hwEntPstnUserTelNo Indicates the user's telephone number. | column | OctetString | .1.3.6.1.4.1.2011.5.25.251.1.1.4 |
| hwEntPstnUserUserGroupId Indicates the user's group id. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.251.1.1.5 |
| hwEntPstnUserRowStatus Indicates the row status.
Options:
active(1)
notInService(2)
notReady(3)
createAndGo(4) … | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.5.25.251.1.1.6 |
| hwEntPstnUserPriority Indicates the priority of the terminal.
Options:
cat1(1) -the highest priority
cat2(2) -the middle priority
cat3(3) -the lowest priority
Default: cat3(3) | column | Enumeration | .1.3.6.1.4.1.2011.5.25.251.1.1.7 |
| hwEntPstnUserPotsLineType Indicates the pots line type.
Options:
del(1) -DEL
lcPBX(2) -Loop Calling PBX
ecPBX(3) -Earth Calling PBX
payPhone(4) -PayPhone
Default: del(1) | column | Enumeration | .1.3.6.1.4.1.2011.5.25.251.1.1.8 |
| hwEntPstnUserDCTime Indicates the power-off interval.
Default: 10
Unit: 10ms | column | Integer32 | .1.3.6.1.4.1.2011.5.25.251.1.1.9 |