hwEntVe1PortErrAlarmSwitch
HUAWEI-ENT-VOICE-PORT-MIB ·
.1.3.6.1.4.1.2011.5.25.252.5.1.7
Object
column
r/w
Bits
Indicates ve1 error alarm switches, from left to right, each bit respresent a switch.
0 means disable, 1 means enable.
bit0: report pcm line fault alarm.
bit1: when error rate reached ULF(Unconditional Line Failure) threshold, report pcm line fault alarm.
bit2: when error rate reached OLF(Optional Line Failure) threshold, report pcm line fault alarm.
bit3: when error rate reached LDT(Line Disturbance Transient Event) threshold, report ve1 digital line transient event alarm.
bit4: when E1 frame slip frequency exceeded in observation interval reached degraded threshold, report event alarm.
bit5: when any line temporary event occurs, report event alarm.
Default: 111000
Context
- MIB
- HUAWEI-ENT-VOICE-PORT-MIB
- OID
.1.3.6.1.4.1.2011.5.25.252.5.1.7- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwEntVe1PortConfigEntry
- Table
- hwEntVe1PortConfigTable
- Siblings
- 6
Syntax
Bits
Values & Constraints
Enumerated Values
0 | bit0 |
1 | bit1 |
2 | bit2 |
3 | bit3 |
4 | bit4 |
5 | bit5 |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwEntVe1PortIndex Indicates the slot/subcard/port index.
bits 31-24 (8 bits): reserved
bits 23-16 (8 bits): slot index
bits 15-8 (8 bits): subcard index
bits 7-0 (8 bits): port index | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.252.5.1.1 |
| hwEntVe1PortFrameCheckMode Indicates the CRC4 frame check mode of the ve1 port.
Options:
enable(1)
disable(2)
Default: disable(2) | column | Enumeration | .1.3.6.1.4.1.2011.5.25.252.5.1.2 |
| hwEntVe1PortImpedance Indicates impedance of the ve1 port.
Options:
ohm75(1)
ohm120(2)
Default: ohm75(1) | column | Enumeration | .1.3.6.1.4.1.2011.5.25.252.5.1.3 |
| hwEntVe1PortSignalType Indicates signal type of the ve1 port.
Options:
ccs(1)
cas(2)
Default: ccs(1) | column | Enumeration | .1.3.6.1.4.1.2011.5.25.252.5.1.4 |
| hwEntVe1PortAccessMode Indicates physical layer digital section access mode of the ve1 port.
Options:
digitalAccess(1)
directAccess(2)
Default:digitalAccess(1) | column | Enumeration | .1.3.6.1.4.1.2011.5.25.252.5.1.5 |
| hwEntVe1PortL2Monitor Indicates whether to support layer 2 error statistic of the ve1 port.
enable(1)
disable(2)
Default: enable(1). | column | Enumeration | .1.3.6.1.4.1.2011.5.25.252.5.1.6 |