hwEntDspOperEC
HUAWEI-ENT-VOICE-COMMON-MIB ·
.1.3.6.1.4.1.2011.5.25.253.8.1.12
Object
column
Enumeration
Indicates the switch state of echo cancellation. Options: enable(1) disable(2) null(255)
Context
- MIB
- HUAWEI-ENT-VOICE-COMMON-MIB
- OID
.1.3.6.1.4.1.2011.5.25.253.8.1.12- Type
- column
- Access
- readonly
- Status
- current
- Parent
- hwEntDspOperEntry
- Table
- hwEntDspOperTable
- Siblings
- 16
Syntax
Enumeration
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwEntDspDimmIndex Indicates the slotid/dsp index.
bits 16-31 (16 bits): reserved
bits 8-15 (8 bits): slotid index
bits 0-7 (8 bits): dsp index | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.253.8.1.1 |
| hwEntDspOperInitJitterBuffer Indicates the initial jitterbuffer of DSP. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.253.8.1.10 |
| hwEntDspOperVAD Indicates the switch state of VAD.
Options:
enable(1)
disable(2)
null(255) | column | Enumeration | .1.3.6.1.4.1.2011.5.25.253.8.1.11 |
| hwEntDspOperGainOut Indicates the output gain of DSP. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.253.8.1.13 |
| hwEntDspOperGainIn Indicates the input gain of DSP. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.253.8.1.14 |
| hwEntDspOprJBInPercent Indicates the current fill level of the jitterbuffer in percent. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.253.8.1.15 |
| hwEntDspOprIpSideMix Indicates the IP side mix state of DSP.
Options:
noState(1)
yesState(2) | column | Enumeration | .1.3.6.1.4.1.2011.5.25.253.8.1.16 |
| hwEntDspOprPcmSideMix Indicates the PCM side mix state of DSP.
Options:
noState(1)
yesState(2) | column | Enumeration | .1.3.6.1.4.1.2011.5.25.253.8.1.17 |
| hwEntDspChannelIndex Indicates the DSP channel index.
bits 8-31 (24 bits): reserved
bits 0-7 (8 bits): channel index | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.253.8.1.2 |
| hwEntDspOperChannelState Indicates the channel state.
Options:
idle(1)
busy(2)
wastage(3)
fault(4)
prohibit(5)
pcmLoopback(6)
ipLoopback(7) | column | Enumeration | .1.3.6.1.4.1.2011.5.25.253.8.1.3 |
| hwEntDspOperAdminStatus Indicates the operation type.
Options:
prohibit(1) -prohibit
unprohibit(2) -unprohibit
pcmLoopback(3) -PCM loopback
ipLoopback(4) -IP loopback
noLoopback(5) -cancel lo… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.253.8.1.4 |
| hwEntDspOperCodec Indicates the codec of DSP.
Options:
g711a(1)
g711u(2)
g723(3)
g729(4)
g726by16k(5)
g726by24k(6)
g726by32k(7)
g726by40k(8)
g722(9)
… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.253.8.1.5 |
| hwEntDspOperPacketInterval Indicates the packet interval of DSP. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.253.8.1.6 |
| hwEntDspOperJitterBufferMode Indicates the jitter buffer mode of DSP.
Options:
dynamic(1)
static(2)
null(255) | column | Enumeration | .1.3.6.1.4.1.2011.5.25.253.8.1.7 |
| hwEntDspOperMinJitterBuffer Indicates the minimum jitterbuffer of DSP. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.253.8.1.8 |
| hwEntDspOperMaxJitterBuffer Indicates the maximum jitterbuffer of DSP. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.253.8.1.9 |