hwDslamAccessNodeId
HUAWEI-DSLAM-PITP-MIB ·
.1.3.6.1.4.1.2011.6.42.16
Object
scalar
r/w
OctetString
Indicates the ANID. Range: a string of 0-50 characters Restrictions: This leaf does not support the create operation, and supports only the modify and query operations. To cancel the settings of the ANID, you can directly perform the set operation without inputting a leaf value.
Context
- MIB
- HUAWEI-DSLAM-PITP-MIB
- OID
.1.3.6.1.4.1.2011.6.42.16- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- hwPITP
- Siblings
- 36
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-50
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwDslamPITPStatus Indicates the status of the global PITP switch.
Options:
1. disable(1) -indicates the global PITP switch is off
2. enableVmode(2) -indicates the global PITP switch is V mode… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.42.1 |
| hwDslamRAIOFormatTable Used for querying the RAIO format; supports the setting of only the user-defined mode.
The indexes of this table are hwDslamRAIOObject, hwDslamRAIOIdPara, hwDslamRAIOMode and hwDs… | table | - | .1.3.6.1.4.1.2011.6.42.10 |
| hwDslamPITPPmodePortTable PITP pmode of port management table.
The index of this table is ifIndex. | table | - | .1.3.6.1.4.1.2011.6.42.12 |
| hwDslamPITPPmodeSuboption90Status Indicates PPPoE plus Suboption90.
Options:
1. true(1) -indicates PPPoE plus Suboption90 is enable
2. false(2) -indicates PPPoE plus Suboption90 is disable
Default: false(2)
Restr… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.6.42.13 |
| hwDslamPITPPmodeSuboptionTable PITP pmode suboption table.
The index of this table is hwDslamPITPPmodeSuboptionIndex. | table | - | .1.3.6.1.4.1.2011.6.42.14 |
| hwDslamRaioSuboptionTable Used for setting and querying RAIO suboptions.
The indexes of this table are hwDslamRaioProtocolTypeIndex and hwDslamRaioSuboptionIndex. | table | - | .1.3.6.1.4.1.2011.6.42.15 |
| hwDslamAccessNodeIp Indicates the L3 interface in the ANIP field. Currently, the device management IP address is used as the device identifier.
The value of the device management IP address is obtain… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.42.17 |
| hwDslamAncpRAIOMode RAIO(Relay agent info Option) mode of ANCP.
Options:
1. common(1) -indicates the RAIO mode of ANCP is common
2. xdslPortRate(2) -indicates the RAIO mode of A… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.42.18 |
| hwDslamDHCPv6OPTIONRAIOMode Indicates the RAIO mode of DHCPv6 Option.
Options:
1. common(1) -indicates the RAIO mode of DHCPv6 option is common
2. xdslPortRate(2) -indicates the RAIO mo… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.42.19 |
| hwDslamPITPVmodeEtherType Indicates the Ethernet protocol type of the PITP VBAS.
Range: 1536-65535, that is, 0x600-0xFFFF
Default: 33280(0x8200)
Restrictions: If the value set to a protocol type is the sam… | scalar | Unsigned32 | .1.3.6.1.4.1.2011.6.42.2 |
| hwDslamRAIODhcpv6Option37EnterpriseNumber Indicates the enterprise number which is used in DHCPv6 option 37.
Range: 0-4294967295
DEFVAL {2011} | scalar | Unsigned32 | .1.3.6.1.4.1.2011.6.42.20 |
| hwDslamRaioProfileTable Used for creating, setting and querying RAIO profiles.
The index of this table is hwDslamRaioProfileName. | table | - | .1.3.6.1.4.1.2011.6.42.21 |
| hwDslamRaioProfileSuboptionTable Used for setting and querying the RAIO suboption state of the RAIO profile.
The indexes of this table are hwDslamRaioProfileName, hwDslamRaioProtocolTypeIndex
and hwDslamRaioSubop… | table | - | .1.3.6.1.4.1.2011.6.42.22 |
| hwDslamRaioProfileFormatTable Used for querying the RAIO format of the RAIO profile; supports the setting of only the user-defined mode.
The indexes of this table are hwDslamRaioProfileName, hwDslamRAIOObject,… | table | - | .1.3.6.1.4.1.2011.6.42.23 |
| hwDslamPppoeFlowStatisticsTable Used for querying and resetting the pppoeplus statistics on flow.
The index of this table is hwDslamPppoeFlowStatisticsIndex.
Statistics for a maximum of 64 service ports are supp… | table | - | .1.3.6.1.4.1.2011.6.42.24 |
| hwDslamPppoeReverse Indicates the status of the global reverse PPPoE packets switch.
Options:
1. enable(1) -indicates the reverse PPPoE packets are forwarded
2. disable(2) -indicates the reverse P… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.42.25 |
| hwDslamRaioCableLabsSuboptionTable Used for setting and querying the RAIO CableLabs suboption.
The index of this table is hwDslamRaioCableLabsSuboptionIndex. | table | - | .1.3.6.1.4.1.2011.6.42.26 |
| hwDslamRAIOAncpAggCidFormatString Indicates the character string of the Access-Aggregation-Circuit-ID-ASCII format
and Access-Aggregation-Circuit-ID-Binary format.
Range: a string of 0-127 characters. | scalar | OctetString | .1.3.6.1.4.1.2011.6.42.27 |
| hwDslamRaioDHCPv6Option17CableLabsSubSuboptionTable Used for setting and querying the RAIO DHCPv6 Option17 CableLabs sub-suboption.
The index of this table is hwDslamRaioDHCPv6Option17CableLabsSuboptionIndex and
hwDslamRaioDHCPv6Op… | table | - | .1.3.6.1.4.1.2011.6.42.28 |
| hwDslamPITPTransparentUserVlanType Indicates the user VLAN based on which PITP pmode is transparently transmitted.
Options:
1. untag(0) -indicates that the user packet does not contain VLANs
2. singleTag… | scalar | Bits | .1.3.6.1.4.1.2011.6.42.29 |
| hwDslamPITPXdslPortRateInfoSwitch Xdsl port rate information switch, current support Adsl only.
Options:
1. disable(1) -indicates the Xdsl port rate information switch is off
2. enable(2) -indicates Xdsl port rat… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.42.3 |
| hwDslamPITPTransparentSingleUserVlanList Indicates the list of user single VLANs contained in the packets whose PITP pmode is transparently transmitted.
VLAN ranges from 0 to 4095. The VLAN list is a character string con… | scalar | OctetString | .1.3.6.1.4.1.2011.6.42.30 |
| hwDslamRaioSuboptionActualDataRateType Indicates the actual data rate type of RAIO suboption.
Options:
1. actualDataRate(1) -indicates the RAIO suboption is actual data rate. The meaning of actualDataRate is defined… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.42.31 |
| hwDslamRadiusNasPortIdRAIOMode Indicates the RAIO mode of RADIUS NAS-Port-Id.
Options:
1. common(1) -indicates the RAIO mode of RADIUS NAS-Port-Id is common
2. xdslPortRate(2) -indicates t… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.42.32 |
| hwDslamRaioSuboptionFastReport Indicates that fast sub-option report by DHCP/DHCPv6/PPPoE+ sub-option 0x81/0x82/0x8C/0x8E is enabled or disabled globally.
Options:
1. disable(1) - Indicates that fas… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.42.33 |
| hwDslamRaioSuboptionValueTable Used to set and query suboption of DHCP, PPPoE+, and ANCP.
If suboption is set by using this table, the set value is used.
If it is not set, the value automatically generated acc… | table | - | .1.3.6.1.4.1.2011.6.42.34 |
| hwDslamPppoeEchoUpportMonitor | node | - | .1.3.6.1.4.1.2011.6.42.35 |
| hwPITPTraps | node | - | .1.3.6.1.4.1.2011.6.42.36 |
| hwDslamAccessUserAbnormalMonitor | node | - | .1.3.6.1.4.1.2011.6.42.37 |
| hwDslamRaioAncpAggCidFormatTable Used for setting and querying the RAIO ANCP aggcid string.
The index of this table is hwDslamRaioAncpAggCidFormatType and hwDslamRaioAncpAggCidFormatIfType. | table | - | .1.3.6.1.4.1.2011.6.42.38 |
| hwDslamPITPCNTelSwitch Xdsl add BRAS information switch.
Options:
1. disable(1) -indicates the Xdsl add BRAS information switch is off
2. enable(2) -indicates Xdsl add BRAS information switch is on
Def… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.42.4 |
| hwDslamPITPTITagSwitch TI Add Dhcp && PITP Tag information switch
Options:
1. disable(1) -indicates the TI Add Dhcp && PITP Tag information switch is off
2. enable(2) -indicates the TI Add Dhcp && PITP… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.42.5 |
| hwDslamPITPRAIOMode Indicates the RAIO mode of PPPoE plus/VBAS.
Options:
1. common(1) -indicates the RAIO mode of PPPoE plus/VBAS is common
2. xdslPortRate(2) -indicates the RAI… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.42.6 |
| hwDslamPITPPMODERAIOMode RAIO(Relay agent info Option) mode of PITP pmode.
Options:
1. common(1) -indicates the RAIO mode of PPPoE plus/VBAS is common
2. xdslPortRate(2) -indicates t… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.42.7 |
| hwDslamPITPVMODERAIOMode RAIO(Relay agent info Option) mode of PITP vmode.
Options:
1. common(1) -indicates the RAIO mode of PPPoE plus/VBAS is common
2. cntel(3) -indicates t… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.42.8 |
| hwDslamDHCPOPTION82RAIOMode Indicates the RAIO mode of DHCP Option82.
Options:
1. common(1) -indicates the RAIO mode of DHCP Option82 is common
2. xdslPortRate(2) -indicates the RAIO mo… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.42.9 |