hwDslamNtvUserVideoFlowPara
HUAWEI-DSLAM-NTV-MIB ·
.1.3.6.1.4.1.2011.6.28.16.1.34
Object
Specifies the parameter value of the flow carrying the multicast video service. The parameter value varies with the flow type. In detail: 1. If the flow type is byUserVlan (1), the range of this parameter is 1-4095. If the flow type is untagged, this parameter is -1. 2. If the flow type is byEncap (2), the options of this parameter are ipv4oe(0), ipoe(1), pppoe(2) and ipv6oe(3). 3. If the flow type is by8021p (3), the range of this parameter is 0-7. 4. If the flow type is byUserVlanEtherType(4), the flow parameter is a combination of the EtherType and the user VLAN. The EtherType can be ipoe(1) or pppoe(2), and the user VLAN is in the range of 1-4095, 0 (priority-tagged), and untagged(-1). For the service flow of the byUserVlanEtherType(4) type, this leaf supports only reading, and does not support creation. 5. If the flow type is by8021pList(6), the flow parameter is a combination of the 802.1p list bitmap and C-VLAN (outer VLAN, 1-4095 or 0xFFFE). The C-VLAN value 0xFFFE indicates any VLAN. In priorityMask, the most significant bit(23) represents the highest priority 7, and the least significant bit(16) represents the lowest priority 0. For example, if the PriorityMask is 0x05, the priority list is 0 and 2. ------------------------------------------------ | bit31-bit24 | bit23-bit16 | bit15-bit0 | ---------------------------------------------- | Reserved | PriorityMask | VLAN ID | -----------------------------------------------
Context
- MIB
- HUAWEI-DSLAM-NTV-MIB
- OID
.1.3.6.1.4.1.2011.6.28.16.1.34- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwDslamNtvUserEntry
- Table
- hwDslamNtvUserTable
- Siblings
- 45
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwDslamNtvUserAuthority Indicates the user authentication attribute.
Options:
1. auth(1) -indicates the user authentication attribute is auth
2. noauth(2) -indicates the user authentication attri… | column | Enumeration | .1.3.6.1.4.1.2011.6.28.16.1.1 |
| hwDslamNtvUserVpi Indicates the VPI of the PVC carrying IGMP packets. This leaf
and the VCI leaf together identify an xDSL user. The value range
is determined by the xDSL line specifications. In … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.28.16.1.10 |
| hwDslamNtvUserVci Indicates the VCI of the PVC carrying IGMP packets. This leaf and
the VPI leaf together identify an xDSL user. The value range is
determined by the xDSL line specifications. In … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.28.16.1.11 |
| hwDslamNtvUserVlan The VLAN which carries IGMP messages. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.28.16.1.12 |
| hwDslamNtvUserFlowType Indicates the traffic stream type. If this leaf is not issued, it indicates the single-service traffic.
Options:
1. byUserVlan(1) -indicates the traffic stream type is by… | column | Enumeration | .1.3.6.1.4.1.2011.6.28.16.1.17 |
| hwDslamNtvUserFlowPara Specifies the parameter value of the flow type. The parameter value varies with the flow type. In detail:
1. If the flow type is byUserVlan (1), the range of this parameter is 1-4… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.28.16.1.18 |
| hwDslamNtvUserMode The status of the user port mode.
Options:
1. snooping(0) -indicates the user port mode is snooping
2. discard(1) -indicates the user port mode is discard
3. forwarding(2) … | column | Enumeration | .1.3.6.1.4.1.2011.6.28.16.1.19 |
| hwDslamNtvUserRightProfile Right profile.
The index of user right profile.When user select the right profile,
it can watch the program in the right profile only. | column | Integer32 | .1.3.6.1.4.1.2011.6.28.16.1.2 |
| hwDslamNtvUserAuthFailProcess The process mode for the user when his authorization failed.
Options:
1. discard(0) -indicates process mode is discard
2. forward(1) -indicates process mode is forward | column | Enumeration | .1.3.6.1.4.1.2011.6.28.16.1.20 |
| hwDslamNtvUserUsedBandwidth Indicates the used bandwidth of a user. When bandwidth management is disabled,
the returned value for hwDslamNtvUserUsedBandwidth is -1.
Unit: kbit/s. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.28.16.1.21 |
| hwDslamNtvUserUsdBwthPcntToPortRate Indicates the percentage of the used bandwidth to the bandwidth allocated to the igmp user.
When bandwidth management is disabled or the bandwidth is not limited, the returned val… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.28.16.1.22 |
| hwDslamNtvUserIfIndex Indicates the port index, corresponding to the shelf ID and slot ID of the port.
Its value and algorithm are the same as those of ifIndex. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.28.16.1.23 |
| hwDslamNtvUserIndex Indicates the unique index of a multicast user.
You can also fill -1 and the system will automatically allocate an index. | column | Integer32 | .1.3.6.1.4.1.2011.6.28.16.1.24 |
| hwDslamNtvUserMatchPara Supported by only GPON and EPON. For an EPON port or a GPON port in the profile mode,
it indicates ontid; for a GPON port in the non-profile mode, it indicates gemportid.
The ra… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.28.16.1.25 |
| hwDslamNtvUserMaxBandWidth Indicates the maximum multicast bandwidth.
Range: 0-4294967295
Unit: kbit/s
Default: noLimit(4294967295) | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.6.28.16.1.26 |
| hwDslamNtvUserRowStatus Row status, used to query, create, modify, and delete a multicast user.
It supports the active(1), createAndGo(4), and destroy(6) operations.
During query, the value of this leaf… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.6.28.16.1.3 |
| hwDslamNtvUserQuickLeaveTime The aging time of user in quick leave.
UNIT: 0.1s | column | 0.1s Integer32 | .1.3.6.1.4.1.2011.6.28.16.1.30 |
| hwDslamNtvUserVideoVpi Indicates the VPI of the traffic stream carrying the multicast video service.
The range is determined by the xDSL line specifications. In a none-ATM type,
the returned value for… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.28.16.1.31 |
| hwDslamNtvUserVideoVci Indicates the VCI of the traffic stream carrying the multicast video service.
The range is determined by the xDSL line specifications. In a none-ATM type,
the returned value for… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.28.16.1.32 |
| hwDslamNtvUserVideoFlowType Indicates the flow type of the multicast video stream.
If this leaf is not issued, it indicates the single-service traffic.
Options:
1. byUserVlan(1) -indicates the flo… | column | Enumeration | .1.3.6.1.4.1.2011.6.28.16.1.33 |
| hwDslamNtvUserQuickLeaveMode Indicates the quick leave attribute of a user. Options:
1. immediate(1) -indicates the quick leave attribute of a user is immediate
2. macBased(2) -indicates the quick leave attr… | column | Enumeration | .1.3.6.1.4.1.2011.6.28.16.1.35 |
| hwDslamNtvReceiveGlobalLeave Indicates the switch of whether to receive the global leave packet sent from the user side.
Options:
1. enable(1) -indicates receive the global leave packet sent from the user si… | column | Enumeration | .1.3.6.1.4.1.2011.6.28.16.1.36 |
| hwDslamNtvUserFlowMode Indicates the xDSL mode. The traffic stream on a non-xDSL board need not be issued with this leaf.
Options:
1. ptm(1) -indicates the xDSL mode is ptm
2. atm(2) -indicates the xDS… | column | Enumeration | .1.3.6.1.4.1.2011.6.28.16.1.37 |
| hwDslamNtvUserFlowID Indicates the ID of the flow carrying the user IGMP protocol. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.28.16.1.38 |
| hwDslamNtvUserVideoFlowID Indicates the ID of the flow carrying the multicast video service. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.28.16.1.39 |
| hwDslamNtvUserOperStatus Indicates the current running status of a multicast user. This leaf supports only the query operation.
When hwDslamNtvUserAdminStatus is block(1), this leaf must be block(3); whe… | column | Enumeration | .1.3.6.1.4.1.2011.6.28.16.1.4 |
| hwDslamNtvUserVideoTagMode Indicates the video tag mode.
Options:
1. untagged(1) -indicates the video tag mode is untagged
2. mvlan(2) -indicates the video tag mode is mvlan
3. vlan(3) … | column | Enumeration | .1.3.6.1.4.1.2011.6.28.16.1.40 |
| hwDslamNtvUserVideoTagPara Indicates video tag parameter. -1 indicates invalid. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.28.16.1.41 |
| hwDslamNtvUserAncpVideoBandwidth Indicates the total video bandwidth allocated by the ANCP server.
When ANCP CAC is disabled or the board does not support ANCP CAC,
the returned value for hwDslamNtvUserAncpVideo… | column | kbps SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.28.16.1.42 |
| hwDslamNtvUserAncpMcastBandwidth Indicates the multicast bandwidth allocated by the ANCP server.
When ANCP CAC is disabled or the board does not support ANCP CAC,
the returned value for hwDslamNtvUserAncpMcastBa… | column | kbps SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.28.16.1.43 |
| hwDslamNtvUserMatchPara2 Indicates the gemindex of a GPON port in the profile mode of a GPON board.
This leaf need not be issued for a non-GPON board or in the GPON non-profile mode.
When the GPON mode i… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.28.16.1.44 |
| hwDslamNtvUserIgmpVersion Indicates the querier IGMP version of user .
Options:
1. v2(1) -indicates the querier IGMP version of user is v2.
2. v3(2) -indicates the querier IGMP version o… | column | Enumeration | .1.3.6.1.4.1.2011.6.28.16.1.45 |
| hwDslamNtvUserCurrentMldVersion Indicates the querier MLD version of user .
Options:
1. v1(1) -indicates the current MLD version of user is v1.
2. v2(2) -indicates the current MLD version of user is… | column | Enumeration | .1.3.6.1.4.1.2011.6.28.16.1.46 |
| hwDslamNtvUserMldQueryVersion Indicates the querier MLD version of user .
Options:
1. v2(1) -indicates the querier MLD version of user is v2.
2. v2Special(2) -indicates a version of query p… | column | Enumeration | .1.3.6.1.4.1.2011.6.28.16.1.47 |
| hwDslamNtvUserUnicastReservedBandwidth Indicates the unicast reserved bandwidth.
Range: 0-4294967294
Unit: kbit/s
Default: 0 | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.6.28.16.1.48 |
| hwDslamNtvUserWatchedVedioTime Indicates the time of Latest watched video.
1970-1-1,0:0:0.0: indicates no record of Latest watched video. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.2011.6.28.16.1.49 |
| hwDslamNtvUserAdminStatus Indicates the management status of a multicast user. It is used to set whether allow a user to watch programs.
Options:
1. block(1) -indicates a user cannot watch program
2. u… | column | Enumeration | .1.3.6.1.4.1.2011.6.28.16.1.5 |
| hwDslamNtvUserWatchedVedioAddressType Indicates the address type of Latest watched video.
Options:
1. unknown(0) -indicates the address type is unknown
2. IPv4(1) -indicates the address type is IPv4
3. IPv6(2) -indic… | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.2011.6.28.16.1.50 |
| hwDslamNtvUserWatchedVedioGrpAddress Indicates the multicast address of Latest watched video.
255.255.255.255: indicates no record of Latest watched video. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.6.28.16.1.51 |
| hwDslamNtvUserWatchedVedioSrcAddress Indicates the source IP address of Latest watched video.
255.255.255.255: indicates does not has source IP Address or no record of Latest watched video. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.6.28.16.1.52 |
| hwDslamNtvUserWatchedVedioVlanID Indicates the VLAN of Latest watched video.
Range: -1|1-4093
-1: indicates no record of Latest watched video. | column | Integer32 | .1.3.6.1.4.1.2011.6.28.16.1.53 |
| hwDslamNtvUserMaxChannel Indicates the maximum number of concurrent channels that can be watched by a user.
Range: 1-255
Default: 8 | column | Integer32 | .1.3.6.1.4.1.2011.6.28.16.1.6 |
| hwDslamNtvUserWatchingChannel1 User watching channel.
The channels that a user is watching. | column | Bits | .1.3.6.1.4.1.2011.6.28.16.1.7 |
| hwDslamNtvUserWatchingChannel2 User watching channel.
The channels that a user is watching. | column | Bits | .1.3.6.1.4.1.2011.6.28.16.1.8 |
| hwDslamNtvUserEnableLog Indicates the log switch. Options:
Options:
1. true(1) -indicates the log switch is on
2. false(2) -indicates the log switch is off
Default: true(1) | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.6.28.16.1.9 |