hwDslamNtvIgmpEncap
HUAWEI-DSLAM-NTV-MIB ·
.1.3.6.1.4.1.2011.6.28.67
Object
scalar
r/w
Enumeration
Indicates the permitted IGMP packet encapsulation format. Options: 1. all(0) -all encapsulation formats 2. ppp(1) -IGMP over PPP encapsulation format 3. ip(2) -IGMP over IP encapsulation format Default: all(0)
Context
- MIB
- HUAWEI-DSLAM-NTV-MIB
- OID
.1.3.6.1.4.1.2011.6.28.67- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- hwDslamNtv
- Siblings
- 139
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | all |
1 | ppp |
2 | ip |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwDslamNtvMode Indicates the IGMP mode. Currently, four modes in enumerated values are supported:
Options:
1. hmcp(1) -indicates the IGMP mode is hmcp
2. igmpSnooping(2) -indicates… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.28.1 |
| hwDslamNtvLastChange NTV feature configure state.
The value of sysUpTime at the time when the system entered its current operational state.
If the current state was entered prior to the last re-initi… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.28.10 |
| hwDslamNtvEnvironmentModeSwitch The switch is offered to select a BTV environment between R3&R5.
'R3' indicate BTV running under non-mvlan-mode mode,
Otherwise the BTV running under mvlan-mode mode. … | scalar | Enumeration | .1.3.6.1.4.1.2011.6.28.100 |
| hwDslamNtvIgmpGlobalLeaveSendSwitch The switch of Global-Leave sending.
Options:
1. enable(1) -indicates the switch of Global-leave sending is enabled
2. disable(2) -indicates the switch of Global-… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.28.101 |
| hwDslamNtvForwardMode Indicates the forwarding control mode.
Options:
1. mvlan(1) -indicates the forwarding control mode is mvlan
2. globalIp(2) -indicates the forwarding control mode is globalIp
D… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.28.102 |
| hwDslamNtvSendQueryToOfflineUserSwitch Indicates the switch of sending query packets to an offline user.
Options:
1. true(1) -indicates sending query packets to an offline user
2. false(2) -indicates not sending quer… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.6.28.103 |
| hwDslamNtvUserStaticJoinTable Indicates all parameters of BTV emulation.
The index of this table is hwDslamNtvUserStaticJoinIndex. | table | - | .1.3.6.1.4.1.2011.6.28.104 |
| hwDslamNtvMcastVlanTagMode Indicates the multicast VLAN tag mode.
Options:
1. single(1) -indicates the multicast VLAN tag mode is single and tag transform is transparent.
2. dual(2) -indicates the multic… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.28.105 |
| hwDslamNtvUserFlowTable Queries the index of a corresponding multicast user according to the stream ID.
The index of this table is hwDslamNtvUserFlowIndex. | table | - | .1.3.6.1.4.1.2011.6.28.106 |
| hwDslamNtvTrapsVbOids | node | - | .1.3.6.1.4.1.2011.6.28.107 |
| hwDslamNtvTraps | node | - | .1.3.6.1.4.1.2011.6.28.108 |
| hwDslamNtvIgmpAcceleratorMode The mode of multicast quickjoin. Options:
1. off(1) -disables the IGMP accelerator in the system.
2. svlan(2) -enables the IGMP accelerator in all service VLANs (SVLANs) in the … | scalar | Enumeration | .1.3.6.1.4.1.2011.6.28.109 |
| hwDslamNtvUpportInterface ifIndex of Main Up Port. | scalar | IF-MIBInterfaceIndex | .1.3.6.1.4.1.2011.6.28.11 |
| hwDslamNtvIgmpAcceleratorVlanPara The specified vlan value when hwDslamNtvIgmpAcceleratorMode is set to vlan(3).
Range: 1-4093,-1
This leaf is issued only when hwDslamNtvIgmpAcceleratorMode is set to vlan(3).
W… | scalar | Integer32 | .1.3.6.1.4.1.2011.6.28.110 |
| hwDslamNtvMVLANIPAddrRangeTable Indicates the range of IP address table.
The indexes of this table are hwDslamNtvVlanID and hwDslamNtvMVLANIPAddrRangeIndex. | table | - | .1.3.6.1.4.1.2011.6.28.111 |
| hwDslamNtvIgmpUserStatCurrTable Queries the igmp current 15 minutes statistic.
The index of this table is hwDslamNtvUserIndex. | table | - | .1.3.6.1.4.1.2011.6.28.112 |
| hwDslamNtvIgmpUserStatHistTable Queries the igmp history 15 minutes statistic.
The index of this table is hwDslamNtvUserIndex. | table | - | .1.3.6.1.4.1.2011.6.28.113 |
| hwDslamNtvSourceIpAndGroupIpMode Indicates the Source IP and Group IP forward mode.
Options:
1. enable(1) -indicates the Source IP and Group IP forward mode is enable
2. disable(2) -indicates the Source IP and … | scalar | Enumeration | .1.3.6.1.4.1.2011.6.28.114 |
| hwDslamNtvMldStatisticTable Indicates the various operations on MLD packet statistics.
The index of this table is hwDslamNtvMldStatisticTypeIndex. | table | - | .1.3.6.1.4.1.2011.6.28.115 |
| hwDslamNtvUserMldStatTable Indicates the statistics of MLD packets sent and received by a multicast user.
The index of this table is hwDslamNtvUserMldStatUserIndex. | table | - | .1.3.6.1.4.1.2011.6.28.116 |
| hwDslamNtvMVlanMldStatTable Indicates the statistics of MLD packets sent and received in a multicast VLAN.
The index of this table is hwDslamNtvMVlanMldStatMVlanIndex. | table | - | .1.3.6.1.4.1.2011.6.28.117 |
| hwDslamNtvMVLANIPv6AddrRangeTable Indicates the range of IPv6 address table.
The indexes of this table are hwDslamNtvVlanID and hwDslamNtvMVLANIPv6AddrRangeIndex. | table | - | .1.3.6.1.4.1.2011.6.28.118 |
| hwDslamNtvIgmpProcessPreferred Indicates the policy for processing the IGMP packets of the traffic stream.
Options:
1. igmpPolicy(1) -indicates that IGMP packets are processed based on IGMP policy configuratio… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.28.119 |
| hwDslamNtvUpportVlanId VlanId of Main Up Port. | scalar | Integer32 | .1.3.6.1.4.1.2011.6.28.12 |
| hwDslamNtvBandwidthCalcMode Indicates multicast bandwidth calculation mode for BTV user CAC.
Options:
1. userDefinedBase(1) -indicates multicast bandwidth calculation is according to user-defined configulat… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.28.120 |
| hwDslamNtvGlobalCfg | node | - | .1.3.6.1.4.1.2011.6.28.121 |
| hwDslamNtvMFSExtTable Indicates the multicast flow staticstics table.
The indexes of this table are hwDslamNtvMFSExtMVlanId, hwDslamNtvMFSExtAddrType,
hwDslamNtvMFSExtProgramIp and hwDslamNtvMFSExtSour… | table | - | .1.3.6.1.4.1.2011.6.28.122 |
| hwDslamNtvMVlanMembershipTable Indicates the member relationship between the multicast VLAN and the multicast user.
The indexes of this table are hwDslamNtvVlanID and hwDslamNtvUserIndex. | table | - | .1.3.6.1.4.1.2011.6.28.124 |
| hwDslamNtvBoardStatisticTable Indicates the IPTV performance statistics of the specific board.
The indexes of this table are hwDslamNtvBoardStatisticFrameID and hwDslamNtvBoardStatisticSlotID. | table | - | .1.3.6.1.4.1.2011.6.28.125 |
| hwMulticastPortStatisticTable Indicates traffic statistics based on the port and the multicast group.
The index of this table is ifIndex. | table | - | .1.3.6.1.4.1.2011.6.28.126 |
| hwDslamNtvChannelBandwidthCACTable Sets the channel bandwidth; queries the allocated and used bandwidth of a channel.
The indexes of this table are ifIndex and hwDslamNtvChannelBandwidthCACChannelID. | table | - | .1.3.6.1.4.1.2011.6.28.127 |
| hwDocsNtvMcastDsidFwdEnabled Indicates the multicast DSID forwarding.
Options:
1. enable(1) -enables the multicast DSID forwarding
2. disable(2) -disables the multicast DSID forwarding
De… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.28.128 |
| hwDocsNtvMcastVlanID Indicates the multicast VLAN ID.
In the set operation, if it is set to -1, it indicates an undo operation.
In the get operation, if it is not set, the value obtained is -1.
Defau… | scalar | Integer32 | .1.3.6.1.4.1.2011.6.28.129 |
| hwDslamNtvRobustness Indicates the system robustness variable.
Range: 1-10
Default: 2 | scalar | Integer32 | .1.3.6.1.4.1.2011.6.28.13 |
| hwDocsNtvIGMPVersion Indicates the querier IGMP version of cable multicast user .
Options:
1. v2(1) -indicates the querier IGMP version of cable multicast user is v2.
2. v3(2) -indi… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.28.130 |
| hwDslamNtvBandwidthOverheadAtm Indicates the ratio of ATM bandwidth overhead(%).
Unit: percent
Default: 0
Range: 0-100 | scalar | Integer32 | .1.3.6.1.4.1.2011.6.28.131 |
| hwDslamNtvBandwidthOverheadPtm Indicates the ratio of PTM bandwidth overhead(%).
Unit: percent
Default: 0
Range: 0-100 | scalar | Integer32 | .1.3.6.1.4.1.2011.6.28.132 |
| hwDslamNtvVideoQualityMonitorCfg | node | - | .1.3.6.1.4.1.2011.6.28.133 |
| hwDslamNtvVideoQualityMonitorInstanceTable Indicates the video quality monitor instance table.
The index of this table is hwDslamNtvVideoQualityMonitorInstanceId. | table | - | .1.3.6.1.4.1.2011.6.28.134 |
| hwDslamNtvVideoQualityMonitorResultTable Indicates the video quality monitor results table.
The indexes of this table are hwDslamNtvVideoQualityMonitorResultInstanceId and hwDslamNtvVideoQualityMonitorResultSN. | table | - | .1.3.6.1.4.1.2011.6.28.135 |
| hwOntMulticastSimulateTable This table is mainly used to configure the ONT Multicast simulation.
You can use the set operation to set a leaf in the table to start an ONT Multicast simulation instance and sim… | table | - | .1.3.6.1.4.1.2011.6.28.136 |
| hwCableMulticastUserTable Indicates the cable multicast user table.
The index of this table is docsIf3CmtsCmRegStatusId. | table | - | .1.3.6.1.4.1.2011.6.28.137 |
| hwDslamNtvOntPortStatisticTable Indicates the multicast statistics of specified ONT port.
The index of this table is hwDslamNtvIOntfIndex, hwDslamNtvOntIndex, hwDslamNtvOntifType, hwDslamNtvOntifPort. | table | - | .1.3.6.1.4.1.2011.6.28.138 |
| hwDslamNtvOntMulticastProfileTable Indicates the ont multicast profile table.
The index of this table is hwDslamNtvOntMulticastProfileNameIndex. | table | - | .1.3.6.1.4.1.2011.6.28.139 |
| hwDslamNtvRevertiveTime Indicates the interval for program switchback.
Range: 1-600 (unit: s).
Default value: -1.
Options:
-1 -indicates the non-revertive mode. | scalar | seconds Integer32 | .1.3.6.1.4.1.2011.6.28.140 |
| hwDslamNtvTtlCheckSwitch Indicates packet TTL checking.
Options:
1. enable(1) -indicates that the IGMP or MLD packets will be discarded if their TTL is not 1.
2. disable(2) -indicates that the value … | scalar | Enumeration | .1.3.6.1.4.1.2011.6.28.141 |
| hwDslamNtvUserPortMulticastFlowStatisticsTable Measures the known multicast traffic on a specified user port.
The index of this table is hwDslamNtvUserPortIfIndex. | table | - | .1.3.6.1.4.1.2011.6.28.142 |
| hwDslamNtvTraffic | node | - | .1.3.6.1.4.1.2011.6.28.143 |
| hwDslamNtvUpportMonitor | node | - | .1.3.6.1.4.1.2011.6.28.144 |
| hwDslamNtvRtpMulticastStatisticInstanceTable Monitor the multicast traffic on a specified object.
The index of this table is hwDslamNtvRtpMulticastStatisticInstanceId. | table | - | .1.3.6.1.4.1.2011.6.28.145 |
| hwDslamNtvRtpMulticastStatisticResultTable Display the statistic result of the RTP multicast statistic instance.
The index of this table is hwDslamNtvRtpMulticastStatisticResultInstanceId. | table | - | .1.3.6.1.4.1.2011.6.28.146 |
| hwDslamNtvRtpMulticastStatisticRecordTable Display the statistic record of the RTP multicast statistic instance.
The index of this table is hwDslamNtvRtpMulticastStatisticRecordInstanceId and hwDslamNtvRtpMulticastStatisti… | table | - | .1.3.6.1.4.1.2011.6.28.147 |
| hwDslamNtvEmdiCfg | node | - | .1.3.6.1.4.1.2011.6.28.148 |
| hwDslamNtvEmdiMonitorUdpTable Indicates the eMDI monitoring of specified object.
The index of this table is hwDslamNtvEmdiMonitorUdpInstance. | table | - | .1.3.6.1.4.1.2011.6.28.149 |
| hwDslamNtvEmdiMonitorUdpConfigCapabilitiesTable Indicates the eMDI video diagnosis capability of the OLT and ONT.
The indexes of this table are hwDslamNtvEmdiMonitorUdpConfigFrameId,hwDslamNtvEmdiMonitorUdpConfigSlotId,
hwDsla… | table | - | .1.3.6.1.4.1.2011.6.28.150 |
| hwDslamNtvUserTable Indicates the multicast user table.
The index of this table is hwDslamNtvUserIndex. | table | - | .1.3.6.1.4.1.2011.6.28.16 |
| hwDslamNtvChannelTable Channel management table.
The index of this table is hwDslamNtvChannelIndex. | table | - | .1.3.6.1.4.1.2011.6.28.17 |
| hwDslamNtvProgramTable Indicates the multicast program table.
The index of this table is hwDslamNtvProgramIndex. | table | - | .1.3.6.1.4.1.2011.6.28.18 |
| hwDslamNtvRightProfileTable Indicates the multicast authority profile table.
The index of this table is hwDslamNtvRightProfileIndex. | table | - | .1.3.6.1.4.1.2011.6.28.19 |
| hwDslamNtvVpi Multicast vpi.
System multicast vpi. Value ranges from 0 to 255.If it is changed,
all the vpi of multicast pvcs are changed.
Default: 0 | scalar | Integer32 | .1.3.6.1.4.1.2011.6.28.2 |
| hwDslamNtvChannelTrafficTable Traffic statistics table.
The index of this table is hwDslamNtvChannelIndex. | table | - | .1.3.6.1.4.1.2011.6.28.20 |
| hwDslamNtvIgmpConfigTable Port IGMP Parameter config table.
The index of this table is hwDslamNtvUserIndex. | table | - | .1.3.6.1.4.1.2011.6.28.21 |
| hwDslamNtvProgramLogTable Program Log statistics table.
The indexes of this table are hwDslamNtvProgramLogStartTime, hwDslamNtvProgramLogEndTime and hwDslamNtvProgramLogIP. | table | - | .1.3.6.1.4.1.2011.6.28.22 |
| hwDslamNtvUpportTable Upport management table.
The index of this table is hwDslamNtvUpportTblIndex. | table | - | .1.3.6.1.4.1.2011.6.28.23 |
| hwDslamNtvIpCascadeTable Indicates the multicast subtending port table.
The index of this table is hwDslamntvIpCascadePortIndex. | table | - | .1.3.6.1.4.1.2011.6.28.24 |
| hwDslamNtvUserRunStateTable Indicates the online status of a multicast user.
The indexes of this table are hwDslamNtvUserIndex and hwDslamNtvUserRunStateProgramIndex. | table | - | .1.3.6.1.4.1.2011.6.28.25 |
| hwDslamNtvUserProfileTable Indicates the binding relationship between a user and a profile in the profile mode.
The indexes of this table are hwDslamNtvUserIndex and hwDslamNtvUserProfileIndex. | table | - | .1.3.6.1.4.1.2011.6.28.26 |
| hwDslamNtvAttrProfileTable User Attribute profile management table.
The index of this table is hwDslamNtvAttrProfileIndex. | table | - | .1.3.6.1.4.1.2011.6.28.27 |
| hwDslamNtvVci Multicast vci.
System multicast vci. Value from 0 to 65535.If it is changed,all the vci of multicast pvc are changed.
Default: 35 | scalar | Integer32 | .1.3.6.1.4.1.2011.6.28.3 |
| hwDslamNtvSourceCheck Source-IP-check administer state.
The true(enable)/ false(disable) state for Source-IP-check.
Used to enable/disable Source-IP-check to control whether source-IP
must be match wh… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.6.28.31 |
| hwDslamNtvDefaultSource Default multicast-source for program.
The program which is not bind to multicast-source when added to
program room will be bind to this default source. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.6.28.32 |
| hwDslamNtvReportInterval Unsolicited report interval.
The frequency at which Unsolicited IGMP Host-Report packets
are transmitted to up-device.
Default: 10
Unit: second | scalar | seconds Integer32 | .1.3.6.1.4.1.2011.6.28.33 |
| hwDslamNtvUpportWorkMode Sets/Queries the working mode of an upstream port. When the upstream port works in
the pim-ssm mode, this leaf does not support the modify operation.
Options:
1. program(1) … | scalar | Enumeration | .1.3.6.1.4.1.2011.6.28.34 |
| hwDslamNtvV1RouterTimerout The Version 1 Router Present Timeout is how long a host must wait
after hearing a Version 1 Query before it may send any IGMPv2
messages.
Default: 400
Unit: second | scalar | seconds Integer32 | .1.3.6.1.4.1.2011.6.28.35 |
| hwDslamNtvLastMemberQueryCount Sets/Queries the number of IGMPv2 group-specific queries.
Range: 1-10
The default value is equal to hwDslamNtvRobustness. | scalar | Integer32 | .1.3.6.1.4.1.2011.6.28.36 |
| hwDslamNtvLastMemberQueryInterval Sets/Queries the interval of IGMPv2 group-specific queries.
Range: 1-50000.
Unit: 0.1s, that is, 0.1-5000s. By default, it is 10 (that is, 1 second).
The group-specific query int… | scalar | 0.1s Integer32 | .1.3.6.1.4.1.2011.6.28.37 |
| hwDslamNtvLastMemberQueryResponse Sets/Queries the maximum response time for an IGMPV2 group-specific query.
Range: 1-255.
Unit: 0.1s, that is, 0.1-25.5s. By default, it is 8 (namely 0.8s).
The group-specific que… | scalar | 0.1s Integer32 | .1.3.6.1.4.1.2011.6.28.38 |
| hwDslamNtvAuthorizeSwitch Indicates the authentication switch.
Options:
1. true(1) -indicates the autentication switch is on
2. false(2) -indicates the autentication switch is off
Default: true(1) | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.6.28.39 |
| hwDslamNtvQueryInterval Sets/Queries the interval of an IGMP general group.
Range: 30-5000
Unit: second
Default: 125 | scalar | seconds Unsigned32 | .1.3.6.1.4.1.2011.6.28.4 |
| hwDslamNtvPreviewSwitch Indicates the system preview switch.
Options:
1. true(1) -indicates the system preview switch is on
2. false(2) -indicates the system preview switch is off
Default: true(1) | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.6.28.40 |
| hwDslamNtvRecognitionTime Indicates the system recognition time.
Range: 1-120s
Default: 30s
Unit: second | scalar | second Integer32 | .1.3.6.1.4.1.2011.6.28.41 |
| hwDslamNtvClearPreviewCount Clears the preview count of all users.
Options:
1. active(1) -clear the preview count of all users | scalar | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.6.28.42 |
| hwDslamNtvTimeClearPreviewCount Clears the preview count of all users regularly. By default,
the system clears the preview count of all users at 4:00 a.m. | scalar | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.2011.6.28.43 |
| hwDslamNtvRightAssignMode Right assigned mode.
Options:
1. userBased(1) -indicates the right assigned mode is userBased
2. profileBased(2) -indicates the right assigned mode is profileBased | scalar | Enumeration | .1.3.6.1.4.1.2011.6.28.44 |
| hwDslamNtvLogReportInterval Indicates the interval for active report of user demand log.
Range: 0-12
Default: 2
Unit: hour
0 indicates disabling the active report of user demand log. | scalar | hour Integer32 | .1.3.6.1.4.1.2011.6.28.45 |
| hwDslamNtvLogOperation Sets the multicast log report function.
Options:
1. logReportStart(1) -immediately report all current logs.
2. logReportStop(2) -stop reporting logs.
3. invalid(-1) -indica… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.28.46 |
| hwDslamNtvBandwidthManagementSwitch Indicates the bandwidth management and CAC switch.
Options:
1. true(1) -indicates the bandwidth management and CAC switch is on
2. false(2) -indicates the bandwidth management a… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.6.28.47 |
| hwDslamNtvLogSwitch Indicates the global log switch.
Options:
1. true(1) -indicates the global log switch is on
2. false(2) -indicates the global log switch is off
Default: true(1) | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.6.28.48 |
| hwDslamNtvQuerier Indicates the source IP address of IGMP packets sent to the user side.
Default: 192.168.1.1 | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.6.28.5 |
| hwDslamNtvFlow8021p priority of 802.1p
Default: 6 | scalar | Integer32 | .1.3.6.1.4.1.2011.6.28.52 |
| hwDslamNtvFlowVlanid Vlan id.
Default:1 | scalar | Integer32 | .1.3.6.1.4.1.2011.6.28.53 |
| hwDslamNtvFlowEncap encapsulation type
Options:
1. ipoe(1) -indicates the encapsulation type is ipoe
2. pppoe(2) -indicates the encapsulation type is pppoe
Default: ipoe | scalar | Enumeration | .1.3.6.1.4.1.2011.6.28.54 |
| hwDslamNtvQuerySwitch IGMP user querier switch.When enable, device may send igmp query to
user sequentially, else, just forward query from upper router to user. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.6.28.55 |
| hwDslamNtvReportProxySwitch Indicates the proxy switch for the report packets in the IGMP snooping mode.
Options:
1. true(1) -indicates the proxy switch for the report packets in the
IGMP sno… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.6.28.56 |
| hwDslamNtvLeaveProxySwitch Indicates the proxy switch for the leave packets in the IGMP snooping mode.
Options:
1. true(1) -indicates the proxy switch for the leave packets in the
IGMP snoop… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.6.28.57 |
| hwDslamNtvSnoopingUserAgingTime The aging time configuration for IGMP over PPPoE user under the IGMP
Snooping mode.
Unit: 1s | scalar | 1s Integer32 | .1.3.6.1.4.1.2011.6.28.58 |
| hwDslamUnkownMulticastTunnelSwitch Unknown multicast tunneling switch.
Options:
1. true(1) -indicates the unknown multicast tunneling switch is on
2. false(2) -indicates the unknown multicast tunneling switch is o… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.6.28.59 |
| hwDslamNtvQueryMaxResponseTime Indicates the maximum response time for an IGMPV2 general query.
Range: 1-255
Unit: 0.1s, that is, 0.1-25.5s.
Default: 10s (100) | scalar | 0.1s Integer32 | .1.3.6.1.4.1.2011.6.28.6 |
| hwDslamNtvUserAllocBwthPercent The bandwidth percentage assigned for user. Default:100% | scalar | Integer32 | .1.3.6.1.4.1.2011.6.28.60 |
| hwDslamNtvMFSTable Indicates the multicast traffic statistic table.
The index of this table is hwDslamNtvMFSProgramIndex. | table | - | .1.3.6.1.4.1.2011.6.28.61 |
| hwDslamNtvUserActionReport Indicates the user action report switch.
Options:
1. true(1) -indicates the user action report switch is on
2. false(2) -indicates the user action report switch is off
Default:… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.6.28.62 |
| hwDslamNtvCDRReportInterval Indicates the interval of reporting the CDRs automatically.
Range: 60-43200
Unit: second
Default: 600 | scalar | second Integer32 | .1.3.6.1.4.1.2011.6.28.63 |
| hwDslamNtvCDRReportNumber Indicates the number of active CDR reports.
Range: 100-200
Default: 200 | scalar | Integer32 | .1.3.6.1.4.1.2011.6.28.64 |
| hwDslamNtvRightPrioMode Indicates the multicast user authority priority mode.
Options:
1. rightWPFI(1) -watch_preview_forbid_idle
2. rightWFPI(2) -watch_preview_forbid_idle
3. rightPWFI(3) -preview_watc… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.28.65 |
| hwDslamNtvIgmpStatisticTable Indicates the various operations on IGMP packet statistics.
The index of this table is hwDslamNtvIgmpStatisticTypeIndex. | table | - | .1.3.6.1.4.1.2011.6.28.66 |
| hwDslamNtvIgmpEcho Indicates the IGMP echo switch.
Options:
1. true(1) -indicates the IGMP echo switch is on
2. false(2) -indicates the IGMP echo switch is off
Default: false(2) | scalar | Enumeration | .1.3.6.1.4.1.2011.6.28.68 |
| hwDslamNtvUpPortMFSTable Measures the multicast traffic on a specified upstream port.
The index of this table is hwDslamNtvUpPortMFSIndex. | table | - | .1.3.6.1.4.1.2011.6.28.69 |
| hwDslamNtvLeaveDelay Leave delay.
UNIT: 0.1s | scalar | 0.1s Integer32 | .1.3.6.1.4.1.2011.6.28.7 |
| hwDslamNtvDefaultUpport Default upport. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.28.70 |
| hwDslamNtvCDRReport Re-transmit the multicast CDR log.
if the value of the ACCESS clause is 'write-only',
then the value of the MAX-ACCESS clause MUST be 'read-write',
and the DESCRIPTION clause SH… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.28.71 |
| hwDslamNtvV3QueryMaxResponseTime Indicates the maximum response time for an IGMPV3 general query.
It is in the range of 1-31744 in the unit of 0.1s, that is, 0.1-3174.4s.
By default, it is 10 (namely 100s). The… | scalar | 0.1s Integer32 | .1.3.6.1.4.1.2011.6.28.72 |
| hwDslamNtvLastMemberV3QueryResponse Sets/queries the maximum response time for IGMPV3 group-specific query.
It is in the range of 1-31744 (in 0.1s), namely 0.1-3174.4s. By default,
it is 8 (namely 0.8s). The group… | scalar | 0.1s Integer32 | .1.3.6.1.4.1.2011.6.28.73 |
| hwDslamNtvSnoopingProcess The process of different (S, G) matching different multicast snooping vlan in IGMPv3 Report.
Options:
1. firstmatch(1) -indicates the process of different (S, G) matching differen… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.28.74 |
| hwDslamNtvPreviewProfileTable Indicates various parameters of a preview profile in the system.
The index of this table is hwDslamNtvPreviewProfileIndex. | table | - | .1.3.6.1.4.1.2011.6.28.75 |
| hwDslamNtvMVLANTable Indicates a multicast VLAN in the system, which records the VLAN attributes.
The index of this table is hwDslamNtvMVLANIndex. | table | - | .1.3.6.1.4.1.2011.6.28.76 |
| hwDslamNtvFlowBasedMulticastPolicyTable Indicates the flow-based suppression policy of unknown multicast streams and processing mode of IGMP packets.
The index of this table is hwDslamNtvFlowID. | table | - | .1.3.6.1.4.1.2011.6.28.77 |
| hwDslamNtvV2RouterTimerout Sets/Queries the timeout time of router V2.
Range: 1-5000
Unit: second
Default: 400 | scalar | seconds Integer32 | .1.3.6.1.4.1.2011.6.28.78 |
| hwDslamNtvMaxChannelNum Indicates the maximum number of programs supported by the system. | scalar | Integer32 | .1.3.6.1.4.1.2011.6.28.8 |
| hwDslamNtvMVlanMemberStatusTable Indicates the member relationship between the multicast VLAN and the multicast user.
The indexes of this table are hwDslamNtvMVLANIndex and hwDslamNtvUserIndex. | table | - | .1.3.6.1.4.1.2011.6.28.80 |
| hwDslamNtvRouterInterAgingTime The aging time of router interface.
Default: 260s | scalar | Integer32 | .1.3.6.1.4.1.2011.6.28.81 |
| hwDslamNtvAllowToBeRouterInterTable Port table which allows to be router interface.
The index of this table is hwDslamNtvAllowToBeRouterInterIndex. | table | - | .1.3.6.1.4.1.2011.6.28.82 |
| hwDslamNtvRouterInterTable The table included the router interface learned currently.
The index of this table is hwDslamNtvRouterInterIndex. | table | - | .1.3.6.1.4.1.2011.6.28.83 |
| hwDslamNtvVUpportTable Indicates the feature parameters of an upstream service port.
The index of this table is hwDslamNtvVUpportTblIndex. | table | - | .1.3.6.1.4.1.2011.6.28.84 |
| hwDslamNtvUserQueryTable Queries the index of a multicast user according to the stream parameters of the multicast user.
The indexes of this table are hwDslamNtvUserQueryIfIndex, hwDslamNtvUserQueryVpi, h… | table | - | .1.3.6.1.4.1.2011.6.28.85 |
| hwDslamNtvUpstreamMode Sets/Queries the interaction mode of the upstream port.
Options:
1. igmp(1) -indicates the interaction mode of the upstream port is igmp
2. pimSsm(2) -indicates the interaction… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.28.86 |
| hwDslamNtvUserExtendedAttributesTable Indicates the maximum count for a user to watch programs at various grades.
The index of this table is hwDslamNtvUserInnerIndex. | table | - | .1.3.6.1.4.1.2011.6.28.87 |
| hwDslamNtvVersionForceSwitch Force switch upplink-port version to IGMP V2.
TRUE(enable) means that upport-port version is force to V2,
FALSE(disable) means that upport-port version is auto-selected.
The defau… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.6.28.88 |
| hwDslamNtvBandwidthCACTable Sets the port bandwidth; queries the allocated and used bandwidth of a port.
The index of this table is hwDslamNtvBandwidthCACifIndex. | table | - | .1.3.6.1.4.1.2011.6.28.89 |
| hwDslamNtvSnoopingAdminStatus Snooping administer state.
The administrative true(enable)/ false(disable) state for IGMP Snooping.
used to enable/disable IGMP Snooping to control whether MAC multicast
forwardi… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.6.28.9 |
| hwDslamNtvMVlanIgmpStatTable Indicates the statistics of IGMP packets transmitted and received in a multicast VLAN.
The index of this table is hwDslamNtvMVlanIgmpStatMVlanIndex. | table | - | .1.3.6.1.4.1.2011.6.28.90 |
| hwDslamNtvUserIgmpStatTable Indicates the statistics of IGMP packets transmitted and received by a multicast user.
The index of this table is hwDslamNtvUserIgmpStatUserIndex. | table | - | .1.3.6.1.4.1.2011.6.28.91 |
| hwDslamNtvIncrementalModifyRightProfileTable Modifies the authority to programs in an authority profile incrementally or in batches;
queries the authority to programs in an authority profile.
The index of this table is hwDs… | table | - | .1.3.6.1.4.1.2011.6.28.92 |
| hwDslamNtvIgmpVersion Indicates the IGMP version.
Options:
1. igmpV2(1) -indicates the IGMP version is V2
2. igmpV3(2) -indicates the IGMP version is V3
Default: igmpV2(1) | scalar | Enumeration | .1.3.6.1.4.1.2011.6.28.93 |
| hwDslamNtvIgmpPriority Indicates the IGMP priority.
Range: 0-7
Default: 0 | scalar | Integer32 | .1.3.6.1.4.1.2011.6.28.94 |
| hwDslamNtvCdrSwitch Indicates the CDR global switch.
Options:
1. true(1) -indicates the CDR global switch is on
2. false(2) -indicates the CDR global switch is off
Default: false(2) | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.6.28.95 |
| hwDslamNtvInitialUnsolicitedReportInterval Indicates the interval for actively reporting initial IGMP join packets.
Range: 1-10
Default: 1
Unit: second | scalar | Integer32 | .1.3.6.1.4.1.2011.6.28.96 |
| hwDslamNtvQueryMode The mode to send query package to EPON user.
Options:
1. withCvlan(1) -indicates the mode to send query package to EPON user is withCvlan
2. withMvlan(2) -indicat… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.28.97 |
| hwDslamNtvIgmpUpstreamVlanMode Indicates the VLAN mode carried in an IGMP upstream packet. Options:
1. mvlan(1) -indicates the VLAN mode that carried in an IGMP upstream packet is mvlan
2. svlan(2) -indicates t… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.28.98 |
| hwDslamNtvIgmpUpstreamVlanPara Indicates the VLAN mode parameter VLAN ID carried in an IGMP upstream packet.
Range: 1-4093
This leaf is issued only when hwDslamNtvIgmpUpstreamVlanMode is set to vlan(3).
When… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.28.99 |