hwAclAdvancedRowStatus
HUAWEI-DSLAM-ACL-MIB ·
.1.3.6.1.4.1.2011.5.1.1.5.1.27
Object
Indicates the row status.
Options:
1. active(1) -when this leaf is queried, the value is fixed to active(1).
2. createAndGo(4) -create an advanced ACL rule
3. destroy(6) -delete an advanced ACL rule and clear the packet statistics of an advanced ACL rule
It is used for creating or deleting an advanced ACL rule and clearing the packet statistics of an advanced ACL rule.
To create an advanced ACL rule, enter hwAclAdvancedAct and set hwAclAdvancedRowStatus to createAndGo(4).
Other parameters are optional. The operator of the source port and destination port and port 1 and port 2 take effect only
when the protocol type is specified as TCP or UDP.
Port 2 needs to be specified only when the port operator character is specified as a value range.
The IDs of the two ports are not differentiated, which are automatically adjusted after delivery.
hwAclAdvancedIcmpType and hwAclAdvancedIcmpCode are specified only when the protocol type is ICMP.
To delete an advanced ACL rule, set hwAclAdvancedRowStatus to destroy(6).
To clear the statistics of packets that match the advanced ACL rules,
set hwAclAdvancedCountClear to cleared(1) and hwAclAdvancedRowStatus to createAndGo(4).
When this leaf is queried, the value is fixed to active(1).
Context
- MIB
- HUAWEI-DSLAM-ACL-MIB
- OID
.1.3.6.1.4.1.2011.5.1.1.5.1.27- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwAclAdvancedRuleEntry
- Table
- hwAclAdvancedRuleTable
- Siblings
- 27
Values & Constraints
Type Values
1 | active |
2 | notInService |
3 | notReady |
4 | createAndGo |
5 | createAndWait |
6 | destroy |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwAclAdvancedAclNum Uniquely identifies an advanced ACL rule group.
Range: 3000-3999
Make sure that the ID of the ACL rule group is already created in hwAclNumGroupTable. | column | Integer32 | .1.3.6.1.4.1.2011.5.1.1.5.1.1 |
| hwAclAdvancedDestIp Describes the destination IP address or network segment of data frames that an advanced ACL rule needs to match.
You can set or not set it. If you do not set it, any destination … | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.5.1.1.5.1.10 |
| hwAclAdvancedDestWild Describes the mask of the destination IP address or network segment of data frames that an advanced ACL rule needs to match.
To match an advanced ACL rule with a s… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.5.1.1.5.1.11 |
| hwAclAdvancedDestOp Describes the operation type of comparing protocol destination ports when hwAclAdvancedProtocol is set to TCP or UDP.
Ranges: 0-5
Options:
1. invalid(0) -indicates an invalid fie… | column | Enumeration | .1.3.6.1.4.1.2011.5.1.1.5.1.12 |
| hwAclAdvancedDestPort1 Describes the operation value of port 1 in the comparison operation types of the destination port in hwAclAdvancedDestOp
when hwAclAdvancedProtocol is set to TCP or UDP.
Range: … | column | Integer32 | .1.3.6.1.4.1.2011.5.1.1.5.1.13 |
| hwAclAdvancedDestPort2 Describes the operation value of port 2 in the comparison operation types of the destination port in hwAclAdvancedDestOp
when hwAclAdvancedProtocol is set to TCP or UDP.
Range: … | column | Integer32 | .1.3.6.1.4.1.2011.5.1.1.5.1.14 |
| hwAclAdvancedPrecedence Describes the priority field of data frames that an advanced ACL rule needs to match.
If the value is not specified for an advanced ACL rule, the invalid value 255 is obtained in… | column | Enumeration | .1.3.6.1.4.1.2011.5.1.1.5.1.15 |
| hwAclAdvancedTos Describes the type of service (ToS) field of data frames that an advanced ACL rule needs to match.
Range: 0-15, 255
If the value is not specified for an advanced A… | column | Integer32 | .1.3.6.1.4.1.2011.5.1.1.5.1.16 |
| hwAclAdvancedDscp Describes the differentiated services code point (DSCP) value of data frames that an advanced ACL rule needs to match.
Range: 0-63, 255
If the value is not specif… | column | Integer32 | .1.3.6.1.4.1.2011.5.1.1.5.1.17 |
| hwAclAdvancedEstablish Describes whether to match the first SYN packet for TCP connection establishment when hwAclAdvancedProtocol is set to TCP.
When filter the packets for TCP connection establishmen… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.1.1.5.1.18 |
| hwAclAdvancedTimeRangeIndex Describes the time range index of an advanced ACL rule.
It is used when the effective time of an advanced ACL rule needs to be configured.
By default, the value i… | column | Integer32 | .1.3.6.1.4.1.2011.5.1.1.5.1.19 |
| hwAclAdvancedSubitem Describes the ID of an advanced ACL rule in an advanced ACL rule group, uniquely identifying an advanced ACL rule.
Range: 0-4294967295
In the create operation, if … | column | Unsigned32 | .1.3.6.1.4.1.2011.5.1.1.5.1.2 |
| hwAclAdvancedIcmpType Describes the ICMP type when packets are filtered by ICMP type and when hwAclAdvancedProtocol is set to ICMP.
Range: 0-255, 256
If the value is not specified for an… | column | Integer32 | .1.3.6.1.4.1.2011.5.1.1.5.1.20 |
| hwAclAdvancedIcmpCode Describes ICMP codes that the ICMP packets are filtered both by ICMP type and ICMP code when hwAclAdvancedProtocol is set to ICMP.
Range: 0-255, 256
If the value is not specified… | column | Integer32 | .1.3.6.1.4.1.2011.5.1.1.5.1.21 |
| hwAclAdvancedFragments Describes whether an advanced ACL rule is effective on only non-tail fragment packets.
Options:
1. true(1) -indicates that an advanced ACL rule is effective on only non-tail frag… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.1.1.5.1.22 |
| hwAclAdvancedLog Describes whether to record the log flag byte of an advanced ACL rule.
Options:
1. true(1) -records the log flag byte of an advanced ACL rule
2. false(2) -does not recording the… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.1.1.5.1.23 |
| hwAclAdvancedEnable Describes whether an advanced ACL rule is valid.
Options:
1. true(1) -indicates that an advanced ACL rule is valid
2. false(2) -indicates that an advanced ACL rule is invalid
… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.1.1.5.1.24 |
| hwAclAdvancedCount Describes the statistics of packets that match the advanced ACL rule. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.5.1.1.5.1.25 |
| hwAclAdvancedCountClear Clears the statistics of packets that match the advanced ACL rule.
Options:
1. cleared(1) -clear the statistics of packets that match the advanced ACL rule
2. nouse(2) -indicate… | column | Enumeration | .1.3.6.1.4.1.2011.5.1.1.5.1.26 |
| hwAclAdvancedPriority Describes the priority of advanced ACL rules.
Range: 0-9
Default: 0
The priority ascends with the value.
When multiple rules are matched at the same time, the ru… | column | Integer32 | .1.3.6.1.4.1.2011.5.1.1.5.1.28 |
| hwAclAdvancedAct Describes the action of an advanced ACL rule.
Options:
1. permit(1) -indicates that the data packets that meet the conditions can pass
2. deny(2) -indicates that the data packe… | column | Enumeration | .1.3.6.1.4.1.2011.5.1.1.5.1.3 |
| hwAclAdvancedProtocol Describes the protocol of IP packets that matches an advanced ACL rule.
Range: 0-255
Default: 0
If the value is not specified for an advanced ACL rule, the invalid … | column | Integer32 | .1.3.6.1.4.1.2011.5.1.1.5.1.4 |
| hwAclAdvancedSrcIp Describes the source IP address or network segment of data frames that needs to match an advanced ACL rule.
You can set or not set it. If you do not set it, any source IP address… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.5.1.1.5.1.5 |
| hwAclAdvancedSrcWild Describes the mask of the source IP address or network segment of data frames that needs to match an advanced ACL rule.
To match an advanced ACL rule with a subnet… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.5.1.1.5.1.6 |
| hwAclAdvancedSrcOp Describes the operation types of comparing packet source ports when the type of hwAclAdvancedProtocol is set to TCP or UDP.
Range: 0-5
Options:
1. invalid(0) -indicates an invali… | column | Enumeration | .1.3.6.1.4.1.2011.5.1.1.5.1.7 |
| hwAclAdvancedSrcPort1 Describes the operation value of port 1 in the comparison operation types of the source port in hwAclAdvancedSrcOp
when hwAclAdvancedProtocol is set to TCP or UDP.
Range: 0-6553… | column | Integer32 | .1.3.6.1.4.1.2011.5.1.1.5.1.8 |
| hwAclAdvancedSrcPort2 Describes the operation value of port 2 in the comparison operation types of the source port in hwAclAdvancedSrcOp
when hwAclAdvancedProtocol is set to TCP or UDP.
Range: 0-6553… | column | Integer32 | .1.3.6.1.4.1.2011.5.1.1.5.1.9 |