hwDhcpSnpBindTblAutosaveFilename

HUAWEI-DHCP-SNOOPING-MIB · .1.3.6.1.4.1.2011.5.25.112.1.8
MIB view Table view

Object

scalar r/w OctetString 
Auto save file name. Make sure the disk name have been given, and the file
must be named with '.tbl' postfixally.

Context

MIB
HUAWEI-DHCP-SNOOPING-MIB
OID
.1.3.6.1.4.1.2011.5.25.112.1.8
Type
scalar
Access
readwrite
Status
current
Parent
hwDhcpSnpObjects
Siblings
30

Syntax

OctetString

Values & Constraints

Object Constraints
range: 1-51

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hwDhcpSnpGlobal
The Global Snooping. Enable this before you want to enable the port,vlan,other interfaces snooping,default is disable.
scalarEnumeration.1.3.6.1.4.1.2011.5.25.112.1.1
hwDhcpSnpGlobalThreshold
DHCP snooping global threshold,default is disabling.
scalarInteger32.1.3.6.1.4.1.2011.5.25.112.1.10
hwDhcpPktRateDiscardNum
DHCP packets that discarded for the rate limit.
scalarSNMPv2-SMICounter32.1.3.6.1.4.1.2011.5.25.112.1.11
hwDhcpSnpCfgTable
The DHCP snooping configuration table.
table-.1.3.6.1.4.1.2011.5.25.112.1.13
hwDhcpSnpBindTable
The snooping bind table.You must give out (1)one of the interface index, VLANID and VSIID at least (2)the Mac-address,ip-address,static type if you want to create a static bind …
table-.1.3.6.1.4.1.2011.5.25.112.1.14
hwDhcpSnpFalsePktStatisticTable
The false packets statistic information table.
table-.1.3.6.1.4.1.2011.5.25.112.1.15
hwDhcpSnpCarCfgTable
The DHCP Snooping CAR table for control of the traffic. The CAR is based on IP and Mac, but configured with interface and VLAN.
table-.1.3.6.1.4.1.2011.5.25.112.1.16
hwDhcpSnpGlobalOption82Format
The format type of Option82,default is hex.
scalarEnumeration.1.3.6.1.4.1.2011.5.25.112.1.17
hwDhcpSnpGlobalOption82PacketFormat
The format mode of Option82,default is extended.
scalarEnumeration.1.3.6.1.4.1.2011.5.25.112.1.18
hwDhcpSnpGlobalOption82RemoteId
Option82 global remote ID.
scalarOctetString.1.3.6.1.4.1.2011.5.25.112.1.19
hwDhcpPktRateCheck
Whether to check the rate of DHCP packets received,default is disabling.
scalarEnumeration.1.3.6.1.4.1.2011.5.25.112.1.2
hwDhcpSnpGlobalOption82RemoteIdSysName
Config Option82 global remote ID as system name,default is disabled.
scalarP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.2011.5.25.112.1.20
hwDhcpSnpGlobalOption82CircuitId
Option82 global circuit ID.
scalarOctetString.1.3.6.1.4.1.2011.5.25.112.1.21
hwDhcpSnpGlobalOption82PktFormatTable
A table about the packet format of option82.
table-.1.3.6.1.4.1.2011.5.25.112.1.22
hwDhcpSnpStaticBindTable
The snooping static bind table.
table-.1.3.6.1.4.1.2011.5.25.112.1.23
hwDhcpSnpServerDetectStatus
This object indicates whether detection against the pseudo DHCP server is enabled. The default value is disabled(2).
scalarP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.2011.5.25.112.1.24
hwDhcpSnpBdFalsePktTable
The false packets statistic information table.
table-.1.3.6.1.4.1.2011.5.25.112.1.25
hwDhcpDegradeReason
DHCP degrade reason.
scalarOctetString.1.3.6.1.4.1.2011.5.25.112.1.26
hwDhcpDegradeLevel
DHCP degrade level.
scalarOctetString.1.3.6.1.4.1.2011.5.25.112.1.27
hwDhcpDegradeRate
DHCP degrade rate.
scalarOctetString.1.3.6.1.4.1.2011.5.25.112.1.28
hwDhcpPktRate
The area of Dhcp packets received rate,default is 100.
scalarInteger32.1.3.6.1.4.1.2011.5.25.112.1.3
hwSnpBindingItemGlobalNum
The number of binding items on the device.
scalarSNMPv2-SMICounter32.1.3.6.1.4.1.2011.5.25.112.1.31
hwSnpBindingItemResourceSize
The resource size of binding items on the device.
scalarSNMPv2-SMICounter32.1.3.6.1.4.1.2011.5.25.112.1.32
hwDhcpSnpTrapRemoteBackupType
The tranfer protocol for DHCP snooping user-bind table remote backup.
scalarOctetString.1.3.6.1.4.1.2011.5.25.112.1.33
hwDhcpSnpTrapObjectsnode-.1.3.6.1.4.1.2011.5.25.112.1.34
hwDhcpPktRateAlarmThreshold
The threshold of the DHCP packets rate Alarm. When the actual rate beyond the maximum rate configured and reach this threshold once, there will be a notification can be sent at t…
scalarInteger32.1.3.6.1.4.1.2011.5.25.112.1.4
hwDhcpPktRateAlarmEnable
Whether to send the DHCP packets rate alarm when the actual rate beyond the maximum rate configured and reach the rate threshold,default is disabling.
scalarEnumeration.1.3.6.1.4.1.2011.5.25.112.1.5
hwDhcpSnpBindTblNomatchedArpGlobalAction
How to deal with the ARP packets that do not match the DHCP snooping bind table in global view,default is forward.
scalarEnumeration.1.3.6.1.4.1.2011.5.25.112.1.6
hwDhcpSnpBindTblNomatchedIpGlobalAction
How to deal with the Ip packets that do not match the DHCP snooping bind table in global view,default is forward.
scalarEnumeration.1.3.6.1.4.1.2011.5.25.112.1.7
hwDhcpSnpBindTblAutosave
Whether to save snooping bind table,default is disabling .
scalarEnumeration.1.3.6.1.4.1.2011.5.25.112.1.9