hwDhcpRelayServerMode
HUAWEI-DHCP-PROXY-MIB ·
.1.3.6.1.4.1.2011.5.18.1.23
Object
scalar
r/w
Enumeration
Configures the working mode of the DHCP server.
Options:
1. shareload(1) -indicates the load balancing mode.
In this mode, the system forwards
all DHCP packets from the user to
all servers in the DHCP server group.
2. backup(2) -indicates the backup mode.
In this mode, the system forwards packets
from the user to only the primary server
in the DHCP server group. When the primary
server is disconnected, the packets are
forwarded to the secondary server.
Default: shareload(1)
Context
- MIB
- HUAWEI-DHCP-PROXY-MIB
- OID
.1.3.6.1.4.1.2011.5.18.1.23- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- hwDhcpMibObject
- Siblings
- 45
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | shareload |
2 | backup |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwDhcpGroupTable Describes the DHCP server group, including IP addresses of the primary DHCP server and secondary
server in each group. It supports the create, modify, delete, and query operation… | table | - | .1.3.6.1.4.1.2011.5.18.1.1 |
| hwDhcpOption82StatisticsTable Describes the statistics of various DHCP packets received on the DHCP L2 relay. It supports the query and set operations.
The index of this table is ifIndex. | table | - | .1.3.6.1.4.1.2011.5.18.1.10 |
| hwDhcpOption82Status Indicates the status of the global DHCP Option82 switch.
Options:
1. enable(1) -indicates adding a vendor tag to or deleting it from the DHCP packet on the device.
2. disable(2) … | scalar | Enumeration | .1.3.6.1.4.1.2011.5.18.1.16 |
| hwDhcpRelayMode Describes the current DHCP forwarding mode of the system.
Options:
1. layer2(3) -indicates L2 mode
2. layer3(1) -indicates L3 mode
Default: layer2(3) | scalar | Enumeration | .1.3.6.1.4.1.2011.5.18.1.17 |
| hwDhcpServerSelectMode Describes the global DHCP server selection mode.
Currently, there are three modes in DHCP L3 relay mode: standard mode, option 60 mode, and MAC-range mode.
the value invalid(-1) i… | scalar | Enumeration | .1.3.6.1.4.1.2011.5.18.1.18 |
| hwDhcpMaxLenAppendOp82 Indicates the allowable maximum length of a DHCP packet.
Range: 500-1500
Unit: byte
Default: 1500 bytes | scalar | Integer32 | .1.3.6.1.4.1.2011.5.18.1.19 |
| hwDhcpSecurityTable A table containing the information of dhcp security.
If security feature is supported by DHCP, add/delete table item of the user address,
whose IP is the index.
dhcp relay record… | table | - | .1.3.6.1.4.1.2011.5.18.1.2 |
| hwDhcpCIDState Circuit-id writing state,true(writing to DHCP packet)/false(not writing to DHCP packet).
Default: true(1) | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.18.1.20 |
| hwDhcpRIDState Remote-id writing state,true(writing to DHCP packet)/false(not writing to DHCP packet).
Default: true(1) | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.18.1.21 |
| hwDhcpSuboption90Status Indicates the status of Suboption90 of DHCP Option82.
Options:
1. enable(1) -enable Suboption90 of DHCP Option82
2. disable(2) -disable Suboption90 of DHCP Option82
Default: disa… | scalar | Enumeration | .1.3.6.1.4.1.2011.5.18.1.22 |
| hwDhcpServerReplyMaxTime Configures or queries the response timeout time of packets of the DHCP server when the server works in the backup mode.
Range: 1-60
Unit: second
Default: 1 | scalar | Integer32 | .1.3.6.1.4.1.2011.5.18.1.24 |
| hwDhcpServerReplyOvertimeMaxTimes Configures or queries the response timeout times of packets of the DHCP server when the server works in the backup mode.
Range: 1-255
Default: 1 | scalar | Integer32 | .1.3.6.1.4.1.2011.5.18.1.25 |
| hwDhcpSuboptionTable Indicates DHCP suboption feature.
The index of this table is hwDhcpSuboptionIndex. | table | - | .1.3.6.1.4.1.2011.5.18.1.26 |
| hwDhcpSuboption7Status Indicates the status of Suboption7 of DHCP Option82.
Options:
1. enable(1) -indicates the Suboption7 of DHCP Option82 is enabled
2. disable(2) -indicates the Suboption7 of DHCP O… | scalar | Enumeration | .1.3.6.1.4.1.2011.5.18.1.27 |
| hwDhcpProxyStatus Describes the current status of the DHCP proxy switch.
Options:
1. enable(1) -enable DHCP proxy
2. disable(2) -disable DHCP proxy
Default: disable(2)
Perform the query and modi… | scalar | Enumeration | .1.3.6.1.4.1.2011.5.18.1.28 |
| hwDhcpLeaseTime Describes the DHCP proxy lease time of the system.
Range: 0, 5-10080
Unit: minute
Default: 0 indicates that the lease time is not set.
Perform the query and modify operations t… | scalar | Integer32 | .1.3.6.1.4.1.2011.5.18.1.29 |
| hwDhcpToL3IfTable Describes the binding between the VLAN interface and the DHCP server group.
It supports the create, query, and modify operations.
The index of this table is hwDhcpToL3VlanIfIndex. | table | - | .1.3.6.1.4.1.2011.5.18.1.3 |
| hwDhcpServerSelectModeByVlanTable Describes the DHCP server selection mode of the VLAN and supports the query and modify operations.
The index of this table is hwVlanIndex. | table | - | .1.3.6.1.4.1.2011.5.18.1.30 |
| hwDhcpUserTable Provides the function of DHCP proxy user management, including querying the user information and forcing a user to go offline.
The index of this table is hwDhcpUserIndex. | table | - | .1.3.6.1.4.1.2011.5.18.1.31 |
| hwDhcpDomainServerInVlanTable Describes the binding between the VLAN interface and the DHCP server group in the domain mode.
It supports the query, create, modify, and delete operations.
The indexes of this t… | table | - | .1.3.6.1.4.1.2011.5.18.1.32 |
| hwDhcpMacServerInVlanTable Describes the binding between the VLAN interface and the DHCP server group in the MAC-range mode.
It supports the create, modify, delete, and query operations.
The indexes of thi… | table | - | .1.3.6.1.4.1.2011.5.18.1.33 |
| hwDhcpRelayInterfaceSrcip Configures or queries the filling mode of the source IP address of the current DHCP-relay upstream packet.
Options:
1. receive(1) -indicates that in the DHCP packet sent from the… | scalar | Enumeration | .1.3.6.1.4.1.2011.5.18.1.34 |
| hwDhcpRelayInterfaceRelayAgent Configures or queries the filling mode of the GIADDR field of the current DHCP-relay upstream packet.
Options:
1. receive(1) -indicates that in the DHCP packet sent from the DHCP… | scalar | Enumeration | .1.3.6.1.4.1.2011.5.18.1.35 |
| hwDhcpSmltTable Used to start and stop the DHCP emulation test and query the DHCP emulation test result.
The index of this table is hwDhcpSmltIndex. | table | - | .1.3.6.1.4.1.2011.5.18.1.36 |
| hwDhcpClientSystemAutoConfigStatus Set the system auto-config status
Options:
1. enable(1) -indicates the system auto-config is enabled
2. disable(2) -indicates the system auto-config is disabled | scalar | Enumeration | .1.3.6.1.4.1.2011.5.18.1.37 |
| hwDhcpMessagesStatisticsTable Queries and resets the statistics of transmitted and received DHCP L3 relay packets.
The index of this table is ifIndex, and the value of the index must be 0. | table | - | .1.3.6.1.4.1.2011.5.18.1.38 |
| hwDhcpProxyVbOids | node | - | .1.3.6.1.4.1.2011.5.18.1.39 |
| hwDhcpFlowStatisticsTable Queries and resets the statistics of dhcp packets on flow.
The index of this table is hwDhcpFlowStatisticsIndex.
Statistics for a maximum of 64 service ports are supported at the … | table | - | .1.3.6.1.4.1.2011.5.18.1.40 |
| hwDhcpReverse Indicates the status of the global reverse DHCP packets switch.
Options:
1. enable(1) -indicates the reverse DHCP packets are forwarded.
2. disable(2) -indicat… | scalar | Enumeration | .1.3.6.1.4.1.2011.5.18.1.41 |
| hwDhcpPriorityDscp The priority value of DSCP.
The range of priority value is 0 to 63.
-1 Indicates no config on the priority value.
The default value is -1. | scalar | Integer32 | .1.3.6.1.4.1.2011.5.18.1.42 |
| hwDhcpPriorityTos The priority value of TOS.
The range of priority value is 0 to 7.
-1 Indicates no config on the priority value.
The default value is -1. | scalar | Integer32 | .1.3.6.1.4.1.2011.5.18.1.43 |
| hwDhcpGatewayGroupTable Indicates the configuration of the gateway group.
The index of this table is hwDhcpGatewayGroupName. | table | - | .1.3.6.1.4.1.2011.5.18.1.44 |
| hwDhcpGatewayGroupGatewayTable Indicates the gateway configration of gateway group.
The indexes of this table are hwDhcpGatewayGroupName, hwDhcpGatewayGroupGatewayType,
hwDhcpGatewayGroupGatewayAddressInetType,… | table | - | .1.3.6.1.4.1.2011.5.18.1.45 |
| hwDhcpGatewayGroupDomainServerTable Indicates the DHCP server configration of gateway group.
The indexes of this table are hwDhcpGatewayGroupName, hwDhcpGatewayGroupServerDomainName, hwDhcpGatewayGroupDomainServer. | table | - | .1.3.6.1.4.1.2011.5.18.1.46 |
| hwDhcpGatewayGroupDomainGatewayTable Indicates the domain gateway configration of gateway group.
The indexes of this table are hwDhcpGatewayGroupName, hwDhcpGatewayGroupGatewayDomainName,
hwDhcpGatewayGroupGatewayAdd… | table | - | .1.3.6.1.4.1.2011.5.18.1.47 |
| hwDhcpDomainGatewayGroupTable Indicates the gateway group configration of DHCP domain.
The indexes of this table are hwDhcpDomainGatewayVlanIfIndex, hwDhcpDomainGatewayDmName, hwDhcpDomainGatewayGroupName. | table | - | .1.3.6.1.4.1.2011.5.18.1.48 |
| hwDhcpOption82TransparentUserVlanType Indicates the user VLAN based on which DHCP option82 is transparently transmitted.
Options:
1. untag(0) -indicates that the user packet does not contain VLANs
2. single… | scalar | Bits | .1.3.6.1.4.1.2011.5.18.1.49 |
| hwDhcpPortTable Indicates DHCP port management feature.
The index of this table is ifIndex. | table | - | .1.3.6.1.4.1.2011.5.18.1.5 |
| hwDhcpOption82TransparentSingleUserVlanList Indicates the list of user single VLANs contained in the packets whose DHCP option82 is transparently transmitted.
VLAN ranges from 0 to 4095. The VLAN list is a character string … | scalar | OctetString | .1.3.6.1.4.1.2011.5.18.1.50 |
| hwDhcpL3CasCapStatus Indicates the capture status of dhcp layer-3 cascade-port.
Options:
1. enable(1) -enable capture of dhcp layer-3 cascade-port
2. disable(2) -disable capture of dhcp layer-3 casca… | scalar | Enumeration | .1.3.6.1.4.1.2011.5.18.1.51 |
| hwDhcpSuboption4Status Indicates the status of Suboption4 of DHCP Option82.
Options:
1. enable(1) -indicates the Suboption4 of DHCP Option82 is enabled
2. disable(2) -indicates the Suboption4 of DHCP O… | scalar | Enumeration | .1.3.6.1.4.1.2011.5.18.1.52 |
| hwDhcpDomainTable Describes the DHCP domain information in the DHCP option 60 mode.
It supports the query, create, modify, and delete operations.
The index of this table is hwDhcpDomainName. | table | - | .1.3.6.1.4.1.2011.5.18.1.6 |
| hwDhcpMacRangeTable Describes the DHCP MAC-range information in the DHCP MAC-range mode.
It supports the query, create, modify, and delete operations.
The index of this table is hwDhcpMacRang… | table | - | .1.3.6.1.4.1.2011.5.18.1.7 |
| hwDhcpDomainGatewayTable Describes the binding between the DHCP domain and gateway corresponding to the VLAN interface in the DHCP option 60 mode.
It supports the modify and query operations.
The indexes… | table | - | .1.3.6.1.4.1.2011.5.18.1.8 |
| hwDhcpMacGatewayTable Describes the binding between the VLAN interface and the gateway in the DHCP MAC-range mode.
It supports the query and modify operations.
The indexes of this table are hwDhcpMacG… | table | - | .1.3.6.1.4.1.2011.5.18.1.9 |