hwDocsIf3CmtsCmUsStatusEqdData
HUAWEI-CMTS-MIB ·
.1.3.6.1.4.1.2011.6.180.1.1.20.4.1.13
Object
column
DOCS-IF-MIBDocsEqualizerData
This attribute indicates the pre-equalization data for the specified upstream Channel on this CM after convolution with data indicated in the RNG-RSP. This data is valid when hwdocsIf3MdCfgUsPreEqEnable RFC 4546 is set to true.
Context
- MIB
- HUAWEI-CMTS-MIB
- OID
.1.3.6.1.4.1.2011.6.180.1.1.20.4.1.13- Type
- column
- Access
- readonly
- Status
- current
- Parent
- hwDocsIf3CmtsCmUsStatusEntry
- Table
- hwDocsIf3CmtsCmUsStatusTable
- Siblings
- 16
Syntax
DOCS-IF-MIBDocsEqualizerData
- Source
- DOCS-IF-MIBDocsEqualizerData
- Base type
OctetString
Values & Constraints
Type Constraints
range: 0
range: 36..260
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwDocsIf3CmtsCmUsStatusTxPower Upstream Transmit Power.
0 represent NULL. | column | 0.1 dBmV SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.180.1.1.20.4.1.1 |
| hwDocsIf3CmtsCmUsStatusPeriodT3Timeouts Number of times counter T3 expired in the CM.
T3 represents waiting for ranging response.
-1 represents invalid value. | column | timeouts SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.180.1.1.20.4.1.10 |
| hwDocsIf3CmtsCmUsStatusPeriodT4Timeouts Number of times counter T4 expired in the CM.
T4 represents waiting for unicast ranging opportunity.
-1 represents invalid value. | column | timeouts SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.180.1.1.20.4.1.11 |
| hwDocsIf3CmtsCmUsStatusUtilization CM traffic ratio on the upstream channel. | column | % SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.180.1.1.20.4.1.12 |
| hwdocsIf3CmtsCmUsStatusFrequency The current used center frequency of the primary upstream interface.
This object returns 0 if the frequency is undefined or unknown.
Range: 5000000-85000000 for AnnexA
5000… | column | Hz SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.180.1.1.20.4.1.14 |
| hwdocsIf3CmtsCmUsStatusChannelWidth The width of the Primary upstream channel.
Range:0..6400000 | column | Hz Integer32 | .1.3.6.1.4.1.2011.6.180.1.1.20.4.1.15 |
| hwDocsIf3CmtsCmUsStatusMinSignalNoise This attribute represents minimum Signal/Noise ratio as
perceived for upstream data from the CM on this upstream
channel. 0 represents invalid value. | column | TenthdB SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.180.1.1.20.4.1.16 |
| hwDocsIf3CmtsCmUsStatusMaxSignalNoise This attribute represents maximum Signal/Noise ratio as
perceived for upstream data from the CM on this upstream
channel. 0 represents invalid value. | column | TenthdB SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.180.1.1.20.4.1.17 |
| hwDocsIf3CmtsCmUsStatusInitialTimingOffset Initial Timing Offset.
4294967295 represent NULL | column | Unsigned32 | .1.3.6.1.4.1.2011.6.180.1.1.20.4.1.2 |
| hwDocsIf3CmtsCmUsStatusPhyOperatingMode Phy Operating Mode.
Options:
1. tdma(1) - Time Division Multiple Access
2. atdma(2) - Advanced Time Division Multiple Access
3. scdma(3) - Synchronous Code Division Multiple Acces… | column | Enumeration | .1.3.6.1.4.1.2011.6.180.1.1.20.4.1.3 |
| hwDocsIf3CmtsCmUsStatusTxTimingOffset Indicates the send time offset of up channel of CM.
-1 represent NULL. | column | 97.6ns(6.25/64 microseconds) SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.180.1.1.20.4.1.4 |
| hwDocsIf3CmtsCmUsGoodCodewords This attribute represents the codewords received
without error from the CM on this channel. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2011.6.180.1.1.20.4.1.5 |
| hwDocsIf3CmtsCmUsCorrectedErrorCodewords This attribute represents the codewords received
with correctable errors from the CM on this channel. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2011.6.180.1.1.20.4.1.6 |
| hwDocsIf3CmtsCmUsUncorrectedErrorCodewords This attribute represents the codewords received
with uncorrectable errors from the CM on this channel. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2011.6.180.1.1.20.4.1.7 |
| hwDocsIf3CmtsCmUsStatusMaxTxPower This attribute represents the maximum transmit power of the upstream channel.
0 represents invalid value. | column | 0.1dBmV SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.180.1.1.20.4.1.8 |
| hwDocsIf3CmtsCmUsStatusMinTxPower This attribute represents the minimum transmit power of the upstream channel.
0 represents invalid value. | column | 0.1dBmV SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.180.1.1.20.4.1.9 |