hwDocsIf3CmtsCmRegStatusCurrentPriority
HUAWEI-CMTS-MIB ·
.1.3.6.1.4.1.2011.6.180.1.1.20.3.1.89
Object
column
r/w
Unsigned32
This attribute references the load balancing priority associated to the cable modem either from the configuration file or from the general or restricted load balancing groups CMTS configuration. 4294967295(0xFFFFFFFF) represents invalid value.
Context
- MIB
- HUAWEI-CMTS-MIB
- OID
.1.3.6.1.4.1.2011.6.180.1.1.20.3.1.89- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwDocsIf3CmtsCmRegStatusEntry
- Table
- hwDocsIf3CmtsCmRegStatusTable
- Siblings
- 91
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 0-4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwDocsIf3CmtsCmRegStatusPrimSid The ID of the primary service flow which the cable modem using. | column | Integer32 | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.1 |
| hwDocsIf3CmtsCmRegStatusEnableDocsisTwo The status of the DOCSIS2.0 Mode.
Options:
1. enable(1) - enable the DOCSIS2.0 Mode
2. disable(2) - disable the DOCSIS2.0 Mode
3. invalidValue(-1) -invalid value | column | Enumeration | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.10 |
| hwDocsIf3CmtsCmRegStatusFragmentation The fragmentation capabilities.
Options:
1. enable(1) - enable the fragmentation capabilities
2. disable(2) - disable the fragmentation capabilities | column | Enumeration | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.11 |
| hwDocsIf3CmtsCmRegStatusConcatenation The concatenation capabilities.
Options:
1. enable(1) - enable the concatenation capabilities
2. disable(2) - disable the concatenation capabilities | column | Enumeration | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.12 |
| hwDocsIf3CmtsCmRegStatusPhs The packet header suppression capabilities.
Options:
1. enable(1) - enable the packet header suppression capabilities
2. disable(2) - disable the packet header suppression capabil… | column | Enumeration | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.13 |
| hwDocsIf3CmtsCmRegStatusBpi The status of Baseline Privacy Interface.
Options:
1. disable(1) - disable the Baseline Privacy Interface
2. bpi(2) - enable the Baseline Privacy Interface
3. bpiPlus(3) - enable … | column | Enumeration | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.14 |
| hwDocsIf3CmtsCmRegStatusL2VPNCapabilities The Layer 2 Virtual Private Network capabilities.
Options:
1. enable(1) - enable the Layer 2 Virtual Private Network capabilities
2. disable(2) - disable the Layer 2 Virtual Priva… | column | Enumeration | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.15 |
| hwDocsIf3CmtsCmRegStatusSidLimit The limit of the Service Identifier when cable modem register. | column | Integer32 | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.16 |
| hwDocsIf3CmtsCmRegStatusSaidLimit The limit of Security Association Identifiers when cable modem register. | column | Integer32 | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.17 |
| hwDocsIf3CmtsCmRegStatusOptionalFilteringSupport Optional Filtering Support.
Bit0 represent 802.1P, bit1 represent 802.1Q, bit2 represent DUT. | column | Integer32 | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.18 |
| hwDocsIf3CmtsCmRegStatusTxEqTapsPerSymbol Transmit Equalizer Support. | column | Integer32 | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.19 |
| hwDocsIf3CmtsCmRegStatusHostInterface The Host Interface when a cable modem arrival. | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.2 |
| hwDocsIf3CmtsCmRegStatusCpeNum The number of CPEs. | column | Integer32 | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.20 |
| hwDocsIf3CmtsCmRegStatusMaxCpe Configuration the max CPE number. | column | Integer32 | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.21 |
| hwDocsIf3CmtsCmRegStatusUsSFIDCnt The number of upstream service flow IDs setup for cable modem. | column | Integer32 | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.22 |
| hwDocsIf3CmtsCmRegStatusDsSFIDCnt The number of downstream service flow IDs setup for cable modem. | column | Integer32 | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.23 |
| hwDocsIf3CmtsCmRegStatusTotalUsPkt Total upstream data. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.24 |
| hwDocsIf3CmtsCmRegStatusTotalUsBytes Total upstream throughput. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.25 |
| hwDocsIf3CmtsCmRegStatusTotalDsPkt Total downstream Data. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.26 |
| hwDocsIf3CmtsCmRegStatusTotalDsBytes Total downstream throughput. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.27 |
| hwDocsIf3CmtsCmRegStatusLbGroupId The load balance group ID assigned. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.28 |
| hwDocsIf3CmtsCmRegStatusLbGroupIdinCfgFile The load balance group ID in the configuration file.
0 represents invalid value. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.29 |
| hwDocsIf3CmtsCmRegStatusMacDomainDsSvcGroup The MAC domain downstream service group.
0 represents invalid value. | column | Integer32 | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.3 |
| hwDocsIf3CmtsCmRegStatusValue Indicates current register status of the CM.
Options:
1. other(1) - other
2. initialRanging(2) - initialRanging
3. rangingAutoAdjComplete(4) - rangingAutoAdjComplete
4. dhcpv4Comp… | column | Enumeration | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.30 |
| hwDocsIf3CmtsCmCtrlOperStatus Indicates the operating mode.
Options:
1. reset(1) - Reset the operating mode
2. delete(2) - Delete the operating mode
3. clearStat(3) - Clear CM statistics
4. invalidValue(-1)… | column | Enumeration | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.31 |
| hwDocsIf3CmtsCmRegStatusRemoteQuery Indicates querying the information about a remote CM.
Options:
1. start(1) - Start querying the information about a remote CM
2. stop(2) - Stop querying the information about a r… | column | Enumeration | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.32 |
| hwDocsIf3CmtsCmRegStatusPrimaryDsRxPower Indicates the downstream receive power of cable modem.
-2147483647 represent NULL. | column | 0.1dBmV SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.33 |
| hwDocsIf3CmtsCmRegStatusPrimaryDsSnr The primary downstream snr of cable modem.
0 represent NULL. | column | 0.1dB SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.34 |
| hwDocsIf3CmtsCmRegStatusSysDesc The system description information of CM.
Return a zero-length OCTET STRING to indicate that the description is not achieved. | column | OctetString | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.35 |
| hwDocsIf3CmtsCmRegStatusPortIfIndex The port ifindex of CM. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.36 |
| hwDocsIf3CmtsCmRegStatusPrimaryUsTxTimingOffset The send time offset of the main up channel of CM.
-1 represent NULL. | column | 97.6ns(6.25/64 microseconds) SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.37 |
| hwDocsIf3CmtsCmRegStatusOfflineTime The value of this node is DateAndTime. | column | OctetString | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.38 |
| hwDocsIf3CmtsCmRegStatusPreviousStatusValue Indicates previous register status of the offline CM.
Options:
1. other(1) - other
2. initialRanging(2) - initialRanging
3. rangingAutoAdjComplete(4) - rangingAutoAdjComplete
4. d… | column | Enumeration | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.39 |
| hwDocsIf3CmtsCmRegStatusMacDomainUsSvcGroup The MAC domain upstream service group.
0 represents invalid value. | column | Integer32 | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.4 |
| hwDocsIf3CmtsCmRegStatusGoodCodeWords This attribute represents the good codewords received
from the CM on this interface. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.40 |
| hwDocsIf3CmtsCmRegStatusCorrectedErrorCodeWords This attribute represents the codewords received
with correctable errors from the CM on this interface. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.41 |
| hwDocsIf3CmtsCmRegStatusUncorrectedErrorCodeWords This attribute represents the codewords received
with uncorrectable errors from the CM on this interface. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.42 |
| hwDocsIf3CmtsCmRegStatusConfigFilename This attribute represents the CM config-file Name for IPv4. | column | OctetString | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.43 |
| hwDocsIf3CmtsCmRegStatusPrimaryUs This object indicates the ID of the CM's active upstream channel.
If -1 is returned, the index is undefined or cannot be identified.
Value range: -1|1..20. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.44 |
| hwDocsIf3CmtsCmRegStatusPrimaryUsRxPower This object indicates the receive power of the CM's primary upstream channel.
-2147483647 represent NULL. | column | 0.1dBmV SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.45 |
| hwDocsIf3CmtsCmRegStatusPrimaryUsTxPower This object indicates the transmit power of the CM's primary upstream channel.
0 represent NULL. | column | 0.1dBmV SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.46 |
| hwDocsIf3CmtsCmRegStatusPrimaryDsTxPower This object indicates the transmit power of the CM's primary downstream channel.
0 represent NULL. | column | 0.1dBmV SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.47 |
| hwDocsIf3CmtsCmRegStatusPrimaryUsSnr This object indicates the signal-to-noise ratio (SNR) of the CM's primary upstream channel.
0 represent NULL. | column | 0.1dB SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.48 |
| hwDocsIf3CmtsCmRegStatusVoiceEnabled This object indicates whether use voice or not.
Options:
1. enable(1) - Voice is enable
2. disable(2) - Voice is disable | column | Enumeration | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.49 |
| hwDocsIf3CmtsCmRegStatusMacDomainCmSvcGroup The mac domain cm service group.
0 represents invalid value. | column | Integer32 | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.5 |
| hwDocsIf3CmtsCmRegStatusDsChangeTimes This object indicates the times that the CM
changes to use different downstream channels.
4294967295 represents invalid value. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.50 |
| hwDocsIf3CmtsCmRegStatusSnmpProxyUpdateTime This object indicates time of the latest update of remote cycle query result. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.51 |
| hwDocsIf3CmtsCmRegStatusIPv6Prefix This attribute indicates the IPv6 prefix of the CM.
If the CM has no IPv6 prefix, or the IPv6 prefix is
unknown, the value of this attribute is the all zeros prefix. | column | INET-ADDRESS-MIBInetAddressIPv6 | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.52 |
| hwDocsIf3CmtsCmRegStatusIPv6PrefixLength This attribute indicates the length of the IPv6 prefix. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.53 |
| hwDocsIf3CmtsCmRegStatusPeriodT1Timeouts The number of T1 timeouts.
T1 represents waiting for UCD.
-1 represents invalid value. | column | timeouts SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.54 |
| hwDocsIf3CmtsCmRegStatusPeriodT2Timeouts The number of T2 timeouts.
T2 represents waiting for broadcast ranging.
-1 represents invalid value. | column | timeouts SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.55 |
| hwDocsIf3CmtsCmRegStatusDsPer The rate of package error received on the downstream channels.
-1 represent NULL. | column | 0.00001 SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.56 |
| hwDocsIf3CmtsCmRegStatusConfigFilenameIPv6 This attribute represents the CM config-file Name for IPv6. | column | OctetString | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.57 |
| hwDocsIf3CmtsCmRegStatusUsPartialChannelMask Indicates whether the upstream channels is at partial status.
Indicates the upstream channels from left to right.
The first character represents upstream channel 1.
The bit value … | column | OctetString | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.58 |
| hwDocsIf3CmtsCmRegStatusDsPartialChannelMask Indicates whether the downstream channels is at partial status.
Indicates the downstream channels from left to right.
The first character represents downstream channel 1.
The bit … | column | OctetString | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.59 |
| hwDocsIf3CmtsCmRegStatusPrimaryDs The primary downstream channel which is a cable modem using.
Value range: -1|1..104. -1 represents invalid value. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.6 |
| hwDocsIf3CmtsCmRegStatusRangingClassIDValidFlag This object indicates the effective identification of the ranging Class ID.
Options:
1. invalid(1) - the invalid ranging Class ID
2. valid(2) - the valid ranging Class ID
Defa… | column | Enumeration | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.60 |
| hwDocsIf3CmtsCmRegStatusRangingClassID This object indicates the ranging Class ID.
The CM indicates support for the Ranging Hold-Off Feature by reporting its Ranging Class ID in the value field.
The low order 16 bits … | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.61 |
| hwDocsIf3CmtsCmRegStatusPrimaryUsGoodCodewords This attribute represents the codewords received without error from the CM on the primary channel. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.62 |
| hwDocsIf3CmtsCmRegStatusPrimaryUsCorrectedErrorCodewords This attribute represents the codewords received with correctable errors from the CM on the primary channel. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.63 |
| hwDocsIf3CmtsCmRegStatusPrimaryUsUncorrectedErrorCodewords This attribute represents the codewords received with uncorrectable errors from the CM on the primary channel. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.64 |
| hwDocsIf3CmtsCmRegStatusPrimaryUsFrequency The current used center frequency of the primary upstream interface.
This object returns 0 if the frequency is undefined or unknown.
Range: 5000000-85000000 for AnnexA
5000… | column | Hz SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.65 |
| hwDocsIf3CmtsCmRegStatusPrimaryUsChannelWidth The width of the Primary upstream channel.
Range:0..6400000 | column | Hz Integer32 | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.66 |
| hwDocsIf3CmtsCmRegStatusPrimaryDsGoodCodewords This attribute represents the codewords received without error from the CM on the primary downstream channel. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.67 |
| hwDocsIf3CmtsCmRegStatusPrimaryDsCorrectedErrorCodewords This attribute represents the codewords received with correctable errors from the CM on the primary downstream channel. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.68 |
| hwDocsIf3CmtsCmRegStatusPrimaryDsUncorrectedErrorCodewords This attribute represents the codewords received with uncorrectable errors from the CM on the primary downstream channel. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.69 |
| hwDocsIf3CmtsCmRegStatusMTC The status of the multi transmit channel.
Options:
1. enable(1) - enable the multi transmit channel
2. disable(2) - disable the multi transmit channel
3. invalidValue(-1) - invali… | column | Enumeration | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.7 |
| hwDocsIf3CmtsCmRegStatusPrimaryDsFrequency The frequency of the primary downstream channel.
0 represents invalid value. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.70 |
| hwDocsIf3CmtsCmRegStatusServiceTypeID Indicates the service type identifier in the configuration file.
Return a zero-length OCTET STRING to indicate that the service type identifier does not exist. | column | OctetString | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.71 |
| hwDocsIf3CmtsCmRegStatusUsTxPowerReachMaxFlag This object indicates the maximum identification of the uptream channel transmission power.
Options:
1. no(1) - CM has not reached the maximum transmit power
2. yes(2) - CM has re… | column | Enumeration | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.72 |
| hwDocsIf3CmtsCmRegStatusTotalUsPktErrorNum This object indicates the error packets received from the CM on the upstream channel.
18446744073709551615(0xFFFFFFFFFFFFFFFF) represents invalid value. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.73 |
| hwDocsIf3CmtsCmRegStatusUsPer The rate of error packets received on the upstream channels.
-1 represent NULL. | column | 0.00001 SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.74 |
| hwDocsIf3CmtsCmRegStatusCrc This object indicates the CRC failures of the upstream channel for the CM.
18446744073709551615(0xFFFFFFFFFFFFFFFF) represents invalid value. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.75 |
| hwDocsIf3CmtsCmRegStatusHcs This object indicates the HCS failures of the upstream channel for the CM.
18446744073709551615(0xFFFFFFFFFFFFFFFF) represents invalid value. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.76 |
| hwDocsIf3CmtsCmRegStatusOfdmMTC The status of the multi transmit OFDM channel.
Options:
1. enable(1) - enable the multi transmit channel
2. disable(2) - disable the multi transmit channel
3. invalidValue(-1) - i… | column | Enumeration | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.77 |
| hwDocsIf3CmtsCmRegStatusOfdmProfileCapability Indicates the number of the OFAM downstream channel profile support.
0 represents invalid value. | column | Integer32 | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.78 |
| hwDocsIf3CmtsCmRegStatusUsBondingGroupId Indicates the upstream bonding group ID. 4294967295(0xFFFFFFFF) represents invalid value. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.79 |
| hwDocsIf3CmtsCmRegStatusUpChannelNum The number of the CMC upstream bonding channels. | column | Integer32 | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.8 |
| hwDocsIf3CmtsCmRegStatusDsBondingGroupId Indicates the downstream bonding group ID. 4294967295(0xFFFFFFFF) represents invalid value. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.80 |
| hwDocsIf3CmtsCmRegStatusRccCfgId Indicates the MAC RCC template ID. 4294967295(0xFFFFFFFF) represents invalid value. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.81 |
| hwDocsIf3CmtsCmRegStatusDsRequiredMask Indicates the downstream required mask of CM register status. | column | DOCS-IF3-MIBAttributeMask | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.82 |
| hwDocsIf3CmtsCmRegStatusDsForbiddenMask Indicates the downstream forbidden mask of CM register status. | column | DOCS-IF3-MIBAttributeMask | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.83 |
| hwDocsIf3CmtsCmRegStatusUsRequiredMask Indicates the upstream required mask of CM register status. | column | DOCS-IF3-MIBAttributeMask | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.84 |
| hwDocsIf3CmtsCmRegStatusUsForbiddenMask Indicates the upstream forbidden mask of CM register status. | column | DOCS-IF3-MIBAttributeMask | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.85 |
| hwDocsIf3CmtsCmRegStatusCurrentServiceTypeID This attribute represents the service type ID the
CMTS picked from the restricted group of restricted
CM list, or the service type ID TLV the CM signaled
to the CMTS during regis… | column | OctetString | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.86 |
| hwDocsIf3CmtsCmRegStatusCurrentPolicyID This attribute references the load balancing policy ID
associated to the cable modem either from the configuration
file or from the general or restrictedload balancing groups
CMT… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.87 |
| hwDocsIf3CmtsCmRegStatusPolicyIDinCfgFile Indicates the policy ID in the configuration file.
4294967295(0xFFFFFFFF) represents invalid value. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.88 |
| hwDocsIf3CmtsCmRegStatusDOCSISVersion The MAC version of the cable modem.
Options:
1. doc10(1) - docsis 1.0 version
2. doc11(2) - docsis 1.1 version
3. doc20(3) - docsis 2.0 version
4. doc30(4) - docsis 3.0 version
5.… | column | Enumeration | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.9 |
| hwDocsIf3CmtsCmRegStatusPriorityinCfgFile Indicates the priority in the configuration file.
4294967295(0xFFFFFFFF) represents invalid value. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.90 |
| hwDocsIf3CmtsCmRegStatusOfdmaPartialChannelMask Indicates whether the ofdma upstream channels is at partial status.
Indicates the upstream channels from left to right.
The first character represents upstream channel 17.
The bit… | column | OctetString | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.91 |
| hwDocsIf3CmtsCmRegStatusOfdmPartialChannelMask Indicates whether the ofdm downstream channels is at partial status.
Indicates the downstream channels from left to right.
The first character represents downstream channel 97.
Th… | column | OctetString | .1.3.6.1.4.1.2011.6.180.1.1.20.3.1.92 |