hwDocsIf3CmtsCmDepartureReasonCode

Indicates the cable modem departure reason code.
1. POWER-ON(1)
2. T17_LOST-SYNC(2)
3. ALL_US_FAILED(3)
4. BAD_DHCP_ACK(4)
5. LINK_LOCAL_ADDRESS_IN_USE(5)
6. T6_EXPIRED(6)
7. REG_RSP_NOT_OK(7)
8. BAD_RCC_TCC(8)
9. FAILED_PRIM_DS(9)
10. TCS_FAILED_ON_ALL_US(10)
11. MTCM_CHANGE(15)
12. T4_EXPIRED(16)
13. NO_PRIM_SF_USCHAN(17)
14. CM_CTRL_INIT(18)
15. DYNAMIC-RANGE-WINDOW-VIOLATION(19)
16. IP_PROV_MODE_OVERRIDE(20)
17. SW_UPGRADE_REBOOT(21)
18. SNMP_RESET(22)
19. REG_RSP_MISSING_RCC(23)
20. REG_RSP_MISSING_TCC(24)
21. REG_RSP_MTC_NOT_ENABLED(25)
22. DHCPv6_BAD_REPLY(26)
23. Other reasons of NE rejection(1000)
24. EAE authentication fail(1001)
25. MIC authentication fail(1002)
26. BPI authentication fail(1003)
27. MAC address clone(1004)
28. Exceed system spec(1005)
29. CM MAC address not in whitelist(1006)
30. DHCP fail(1007)
31. System overload(1008)
32. System resource not enough(1009)
33. Service type override(1010)
34. Reset CM(1011)
35. Reset CM by status check(1012)
36. Exceed service flow spec(1013)
37. Service flow fail(1014)
38. Tftp download fail(1015)
39. CM MAC address in blacklist(1016)
40. CM ip conflict(1017)
41. CM service data check fail(1018)
42. Board notify CM departure(1019)
43. Unknown reasons of Service check(1020)
44. Slave status check fail(1021)
45. Reset CM by unknown reason(1022)
46. Other reasons of board rejection(2000)
47. Register ack message return fail(2001)
48. Register ack message timeout(2002)
49. Admission control reject(2003)
50. Channel config modify(2004)
51. Station maintenance range missing(2005)
52. Reg-REQ message timeout(2006)
53. Actively delete the CM(2007)
54. Admission control fail(2008)
55. Reg-REQ message decode fail(2009)
56. Recived Init-Rng after Reg success(2010)
57. Reg-REQ failed to install Serv-Flow(2011)
58. Recived Init-Rng before Reg success(2012)
59. invalid value(-1)
Note:If the departure reason is CM registration, the Error ID range is 1-999. 
If the departure reason is that the NE does not allow the CM to go online, the Error ID range is 1000-1999. 
If the departure reason is that the board does not allow the CM to go online, the Error ID range is 2000-2999.

MIB

HUAWEI-CMTS-MIB

OID

.1.3.6.1.4.1.2011.6.180.1.1.20.78.1.3

Type

column

Access

readonly

Status

current

Parent

hwDocsIf3CmtsCmDepartureReasonEntry

Table

hwDocsIf3CmtsCmDepartureReasonTable

Siblings

2