hwCmtsUsSpectrumMonitorUsSgId
HUAWEI-CMTS-MIB ·
.1.3.6.1.4.1.2011.6.180.1.1.20.56.1.8
Object
column
r/w
Integer32
Indicates the US-SG-ID for the upstream spectrum scanning. Default: 1
Context
- MIB
- HUAWEI-CMTS-MIB
- OID
.1.3.6.1.4.1.2011.6.180.1.1.20.56.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwCmtsUsSpectrumMonitorCfgEntry
- Table
- hwCmtsUsSpectrumMonitorCfgTable
- Siblings
- 10
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-2
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwCmtsUsSpectrumMonitorSwitch Indicates the upstream frequency spectrum scanning function.
Default:disable(2)
Options:
1. enable(1) - enable the upstream frequency spectrum scanning function
2. disable(2) - di… | column | Enumeration | .1.3.6.1.4.1.2011.6.180.1.1.20.56.1.1 |
| hwCmtsUsSpectrumMonitorFrequencyList The frequency list for the upstream spectrum scanning.
It can contain as most as 50 frequencies.
Every 10 octets represent a frequency,
(,) used to indicate a separation of the di… | column | Hz OctetString | .1.3.6.1.4.1.2011.6.180.1.1.20.56.1.10 |
| hwCmtsUsSpectrumMonitorReportPeriod Indicates the upstream frequency spectrum report period mode.
Default:ms5000(1)
Options:
1. ms5000(1) -Upload data in 5000ms
2. ms500(2) -Upload data in 500ms
3. invalid(-1) -Inva… | column | Enumeration | .1.3.6.1.4.1.2011.6.180.1.1.20.56.1.11 |
| hwCmtsUsSpectrumMonitorMode Indicates the upstream frequency spectrum scanning mode.
Default:noise(1)
Options:
1. noise(1) -Scanning noise frequency spectrum
2. carrier(2) -Scanning carrier frequency spectru… | column | Enumeration | .1.3.6.1.4.1.2011.6.180.1.1.20.56.1.2 |
| hwCmtsUsSpectrumMonitorResolution Indicates the upstream frequency spectrum scanning resolution.
Default: hz300K(6)
Options:
1. hz50K(1) - Sets the upstream frequency spectrum scanning resolution to 50Khz
2.… | column | Enumeration | .1.3.6.1.4.1.2011.6.180.1.1.20.56.1.3 |
| hwCmtsUsSpectrumMonitorSampleTime Indicates the upstream frequency spectrum scanning period.
Default: ms100(1).
Options:
1. ms100(1) - Sets the upstream frequency spectrum scanning period to 100ms
2. ms200(2) … | column | Enumeration | .1.3.6.1.4.1.2011.6.180.1.1.20.56.1.4 |
| hwCmtsUsSpectrumMonitorFrequencyStart Indicates the start frequency for upstream spectrum scanning.
-1 represent that the upstream spectrum configuration of start frequency has invalid configuration data.
Default: 0 | column | Hz Integer32 | .1.3.6.1.4.1.2011.6.180.1.1.20.56.1.5 |
| hwCmtsUsSpectrumMonitorFrequencyEnd Indicates the end frequency for upstream spectrum scanning.
Requirement: The difference between the end frequency and the start frequency must be greater than the upstream frequen… | column | Hz Integer32 | .1.3.6.1.4.1.2011.6.180.1.1.20.56.1.6 |
| hwCmtsUsSpectrumMonitorSampleStart Indicates the start frequency for the upstream spectrum scanning.
-1 represent that the upstream spectrum scanning mode is disable or the collected data have not been uploaded. | column | Integer32 | .1.3.6.1.4.1.2011.6.180.1.1.20.56.1.7 |
| hwCmtsUsConstellationUsChannelId Indicates the upstream channel ID for the constellation scanning.
It only can be set to 3.0 channel.
Default: 1 | column | Integer32 | .1.3.6.1.4.1.2011.6.180.1.1.20.56.1.9 |