hwCmtsEqamChannelNotActiveReason
HUAWEI-CMTS-MIB ·
.1.3.6.1.4.1.2011.6.180.1.1.19.1.1.9
Object
column
Enumeration
The reason of EQAM channel not active. Options: 1.other(1) - Other reason 2.noLicense(2) - No license 3.modeError(3) - Channel mode error 4.exceedMaxChannelNum(4) - Channel ID exceeds actual capability 5.exceedMaxFreq(5) - The channel frequency exceeds actual capability 6.exceedMaxFreqSpan(6) - Exceed maximum frequency span 7.exceedMaxEqamRateNum(7) - The number of EQAM symbol-rate exceeds the actual capability 8.exceedMaxFreqGroup(9) - Exceed maximum frequency group number 9.exceedDocsisDsNum(13) - The number of DOCSIS downstream channel exceeds real capability 10.exceedDsEqamNum(14) - The number of EQAM downstream channel exceeds real capability 11.exceedDocsisAndVodEqamDsNum(16) - The total number of DOCSIS and EQAM VOD downstream channels exceeds the actual capability 12.notSupportChannelAnnex(20) - Not support channel Annex 13.freqProfMismatch(21) - The frequency and the frequency profile configured for the port do not match 14.channelIdOccupiedByOther(22) - The channel ID is occupied by another channel 15.overlapfreqwidth(23) - The difference of frequency between two downstream channels is incorrect. It must be at least 8 MHz in AnnexA mode and 6 MHz in AnnexB mode 16.notSupportChannelModulation(29) - The board does not support the configured channel modulation mode 17.invalid(-1) - Indicates the downstream channel is active
Context
- MIB
- HUAWEI-CMTS-MIB
- OID
.1.3.6.1.4.1.2011.6.180.1.1.19.1.1.9- Type
- column
- Access
- readonly
- Status
- current
- Parent
- hwCmtsEqamChannelEntry
- Table
- hwCmtsEqamChannelTable
- Siblings
- 11
Syntax
Enumeration
Values & Constraints
Enumerated Values
-1 | invalid |
1 | other |
2 | noLicense |
3 | modeError |
4 | exceedMaxChannelNum |
5 | exceedMaxFreq |
6 | exceedMaxFreqSpan |
7 | exceedMaxEqamRateNum |
9 | exceedMaxFreqGroup |
13 | exceedDocsisDsNum |
14 | exceedDsEqamNum |
16 | exceedDocsisAndVodEqamDsNum |
20 | notSupportChannelAnnex |
21 | freqProfMismatch |
22 | channelIdOccupiedByOther |
23 | overlapfreqwidth |
29 | notSupportChannelModulation |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwCmtsEqamChannelId The EQAM channel ID.
Range: 1..254 | column | Integer32 | .1.3.6.1.4.1.2011.6.180.1.1.19.1.1.1 |
| hwCmtsEqamChannelAnnexType This attribute defines the ITU-J-83 Annex being used for this MAC Domain.
The value of this attribute indicates the conformance of the implementation to important regional cable … | column | Enumeration | .1.3.6.1.4.1.2011.6.180.1.1.19.1.1.10 |
| hwCmtsEqamChannelWidth The bandwidth of this EQAM channel. Most
implementations are expected to support a channel width
of 6 MHz (AnnexB/AnnexC) and/or 8 MHz (AnnexA). | column | Hz SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.180.1.1.19.1.1.11 |
| hwCmtsEqamChannelConstellation Indicates the constellation mode of CMTS EQAM channel.
Options:
1. normal(1) - Normal mode
2. inverted(2) - Inverted mode
Default:inverted(2) | column | Enumeration | .1.3.6.1.4.1.2011.6.180.1.1.19.1.1.12 |
| hwCmtsEqamChannelFrequency The frequency of the EQAM channel.
0 represents invalid value.
Unit: Hz | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.180.1.1.19.1.1.2 |
| hwCmtsEqamChannelModulation The modulation type associated with this EQAM channel.
Options:
1. unknown(1) - unknown
2. other(2) - Indicates the other modulation type
3. qam64(3) - QAM64
4. qam256(4) - … | column | Enumeration | .1.3.6.1.4.1.2011.6.180.1.1.19.1.1.3 |
| hwCmtsEqamChannelSymbolRate Indicates the symbol rate of a CMTS EQAM channel,
The channel symbol rate takes effect only for the EQAM channel complying with AnnexA or AnnexC.
The symbol rate value must be 6.9… | column | Enumeration | .1.3.6.1.4.1.2011.6.180.1.1.19.1.1.4 |
| hwCmtsEqamChannelInterleaveDepth The Forward Error Correction (FEC) interleaving used
for this EQAM channel.
Options:
1. unknown(1) - unknown
2. other(2) - Indicates the other modulation t… | column | Enumeration | .1.3.6.1.4.1.2011.6.180.1.1.19.1.1.5 |
| hwCmtsEqamChannelRfPower This attribute represents the Rx power of the CMTS EQAM channel.
-2147483647 represents invalid value.
The default value is 450. | column | TenthdBmV SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.180.1.1.19.1.1.6 |
| hwCmtsEqamChannelAdminStatus Indicates the administrative status of CMTS EQAM channel.
Options:
1. disable(1) - disable CMTS EQAM channel
2. enable(2) - enable CMTS EQAM channel
3. invalid(-1) - i… | column | Enumeration | .1.3.6.1.4.1.2011.6.180.1.1.19.1.1.7 |
| hwCmtsEqamChannelOperStatus Indicates the operational status of CMTS EQAM channel.
Options:
1. down(1) - down status
2. up(2) - up status
3. invalid(-1) - invalid value | column | Enumeration | .1.3.6.1.4.1.2011.6.180.1.1.19.1.1.8 |