hwClockSourceSysClkLockModeChange
HUAWEI-CLOCK-MIB ·
.1.3.6.1.4.1.2011.5.25.186.1.8.2
Object
notification
This object indicates the notification of the change on the working mode of the system clock.
Context
- MIB
- HUAWEI-CLOCK-MIB
- OID
.1.3.6.1.4.1.2011.5.25.186.1.8.2- Type
- notification
- Status
- current
- Parent
- hwClockNotifications
- Siblings
- 31
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwClockSourceSwitch This object indicates the notification of the switchover of clock reference sources. | notification | - | .1.3.6.1.4.1.2011.5.25.186.1.8.1 |
| hwClockSourceFailed This object indicates that the clock source is invalid. | notification | - | .1.3.6.1.4.1.2011.5.25.186.1.8.11 |
| hwClockSourceValid This object indicates that the clock source is valid. | notification | - | .1.3.6.1.4.1.2011.5.25.186.1.8.12 |
| hwClockSourceFreqCheckResume This object indicates an alarm that the clock source frequency detection is normal. | notification | - | .1.3.6.1.4.1.2011.5.25.186.1.8.13 |
| hwClockSourceOutputBelowThresholdResume This object indicates an alarm that the SSM level output by the clock source is higher than the configured threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.186.1.8.14 |
| hwClockCesAcrMasterPwChange This object indicates a master PW change event. The object associated is hwClockCesAcrSlot, hwClockCesAcrCard, hwClockCesAcrDomain, hwClockCesAcrOldMasterPwName, hwClockCesAcrNewM… | notification | - | .1.3.6.1.4.1.2011.5.25.186.1.8.15 |
| hwClockCesAcrLockFail This object indicates an alarm that a CES ACR clock source is unlocked. The object associated is hwClockCesAcrSlot, hwClockCesAcrCard, hwClockCesAcrDomain, hwClockCesAcrLockState. | notification | - | .1.3.6.1.4.1.2011.5.25.186.1.8.16 |
| hwClockCesAcrLockFailResume This object indicates an alarm that a CES ACR clock source is locked. The object associated is wClockCesAcrSlothwClockCesAcrCardhwClockCesAcrDomainhwClockCesAcrLockState. | notification | - | .1.3.6.1.4.1.2011.5.25.186.1.8.17 |
| hwClockClusterTopoFail This object indicates a clock synchronization topology planning failure between chassis in a cluster. | notification | - | .1.3.6.1.4.1.2011.5.25.186.1.8.22 |
| hwClockClusterTopoFailResume This object indicates a clock synchronization topology planning success between chassis in a cluster. | notification | - | .1.3.6.1.4.1.2011.5.25.186.1.8.23 |
| hwClockSourceInputBelowThreshold This object indicates an alarm that the input SSM level of the clock source is lower than the threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.186.1.8.24 |
| hwClockSourceInputBelowThresholdResume This object indicates an alarm that the input SSM level of the clock source reaches or exceeds the threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.186.1.8.25 |
| hwClockSsmPktLos This object indicates an alarm that ESMC packets are lost. | notification | - | .1.3.6.1.4.1.2011.5.25.186.1.8.26 |
| hwClockSsmPktLosResume This object indicates that ESMC packet loss recovers. | notification | - | .1.3.6.1.4.1.2011.5.25.186.1.8.27 |
| hwClockCesDcrMasterPwChange CES DCR master PW status change. | notification | - | .1.3.6.1.4.1.2011.5.25.186.1.8.28 |
| hwClockCesDcrLockFail CES DCR clock source lock fail. | notification | - | .1.3.6.1.4.1.2011.5.25.186.1.8.29 |
| hwClockSourceStateChange The state of clock source change notification. | notification | - | .1.3.6.1.4.1.2011.5.25.186.1.8.3 |
| hwClockCesDcrLockFailResume CES DCR clock source lock fail resume. | notification | - | .1.3.6.1.4.1.2011.5.25.186.1.8.30 |
| hwClockSourceSsmChange This object indicates that the clock source SSM is changed. | notification | - | .1.3.6.1.4.1.2011.5.25.186.1.8.31 |
| hwClockFMSwitch Clock select mode is force or manual. | notification | - | .1.3.6.1.4.1.2011.5.25.186.1.8.32 |
| hwClockFMSwitchResume Clock select mode is automative. | notification | - | .1.3.6.1.4.1.2011.5.25.186.1.8.33 |
| hwClockSyncBad Clock frequency synchronization bad. | notification | - | .1.3.6.1.4.1.2011.5.25.186.1.8.34 |
| hwClockSyncBadResume Clock frequency synchronization bad resume. | notification | - | .1.3.6.1.4.1.2011.5.25.186.1.8.35 |
| hwClockPortNonSupport This object indicates an alarm that the interface does not support physical layer clock synchronization. | notification | - | .1.3.6.1.4.1.2011.5.25.186.1.8.36 |
| hwClockPortNonSupportResume This object indicates an alarm that the interface supports physical layer clock synchronization. | notification | - | .1.3.6.1.4.1.2011.5.25.186.1.8.37 |
| hwClockGnssModelChange The smart clock gnss model changed. | notification | - | .1.3.6.1.4.1.2011.5.25.186.1.8.38 |
| hwClockSourceStateResume The state of clock source resume notification. | notification | - | .1.3.6.1.4.1.2011.5.25.186.1.8.4 |
| hwClockSourceFreqCheck This object indicates the notification of the abnormal result of frequency offset detection of the clock reference clock. | notification | - | .1.3.6.1.4.1.2011.5.25.186.1.8.5 |
| hwClockSourceOutputBelowThreshold This object indicates that the SSM level output by the clock source is lower than the configured threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.186.1.8.6 |
| hwClockNotInLockedMode This object indicates that the system clock is in the unlocked state. | notification | - | .1.3.6.1.4.1.2011.5.25.186.1.8.7 |
| hwClockInLockedMode This object indicates that the system clock is in the locked state. | notification | - | .1.3.6.1.4.1.2011.5.25.186.1.8.8 |
Notification Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwClockChassisId This object indicates the chassis ID. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.186.1.7.4 |
| hwClockSourceOldLockMode The old lock mode of clock source. | scalar | Enumeration | .1.3.6.1.4.1.2011.5.25.186.1.7.3 |
| hwClockAttributeSysClkLockMode The Lock mode of system clock. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.186.1.9.1.12 |