hwAtmCesPortCfgLoopLineState
HUAWEI-CES-MIB ·
.1.3.6.1.4.1.2011.5.11.3.1.11
Object
column
Enumeration
E1 port line state. Options: 1. synchronized(0) - Synchronized state 2. farEndAlarm(1) - Far-End-Alarm state 3. nearEndAlarm(2) - Near-End-Alarm state 4. testing(3) - Testing state 5. unknown(4) - Unknown state
Context
- MIB
- HUAWEI-CES-MIB
- OID
.1.3.6.1.4.1.2011.5.11.3.1.11- Type
- column
- Access
- readonly
- Status
- current
- Parent
- hwAtmCesPortCfgEntry
- Table
- hwAtmCesPortCfgTable
- Siblings
- 19
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | synchronized |
1 | farEndAlarm |
2 | nearEndAlarm |
3 | testing |
4 | unknown |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwAtmCesPortCfgWorkMode The working mode of port.
Options:
1. uni(1) - UNI mode
2. sdt(2) - SDT mode
3. udt(3) - UDT mode
4. idle(4) - Idle mode
5. ima(5) - IM… | column | Enumeration | .1.3.6.1.4.1.2011.5.11.3.1.1 |
| hwAtmCesPortCfgPhyState E1 port physical state.
Options:
1. normal(0) - Normal state
2. fault(1) - Fault state
3. unknown(2) - Unknown state | column | Enumeration | .1.3.6.1.4.1.2011.5.11.3.1.10 |
| hwAtmCesPortCfgE1Frametype pvm-e1 port frame type.
Options:
1. pcm31(1) - PCM31 frame
2. unframe(2) - It's not a frame | column | Enumeration | .1.3.6.1.4.1.2011.5.11.3.1.12 |
| hwAtmCesPortAdminStatus Port operation type.
Options:
1. reset(1) - Reset port
2. selfcheck(2) - Self check | column | Enumeration | .1.3.6.1.4.1.2011.5.11.3.1.13 |
| hwAtmCesPCMErrorReportAlarm PCM error report configuration.
bit0: report alarm when pcm line fault occurs;
bit1: set PCM fault and set port to OOS state when ULF exceeds the threshold;
bit2: set PCM fault an… | column | Unsigned32 | .1.3.6.1.4.1.2011.5.11.3.1.14 |
| hwAtmCesPortCfgESAlarmThreshold Errored seconds alarm threshold. | column | Integer32 | .1.3.6.1.4.1.2011.5.11.3.1.15 |
| hwAtmCesPortCfgCSESAlarmThreshold Consecutive severely errored seconds alarm threshold. | column | Integer32 | .1.3.6.1.4.1.2011.5.11.3.1.16 |
| hwAtmCesPortCfgDMAlarmThreshold Degraded minutes alarm threshold. | column | Integer32 | .1.3.6.1.4.1.2011.5.11.3.1.17 |
| hwAtmCesPortLineCode Configuration of the line encoding type.
Options:
1. hdb3(1) - HDB3 code
2. ami(2) - AMI code
3. b8zs(3) - B8ZS code
4. invalidCode(-1) - Invalid code | column | Enumeration | .1.3.6.1.4.1.2011.5.11.3.1.18 |
| hwAtmCesPortAcmSource Configuration of adaptive clock source.
255 represents invalid value. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.11.3.1.19 |
| hwAtmCesPortCfgClockMode The clock mode of port.
Options:
1. system(1) - System clock
2. line(2) - Line clock
3. acm(3) - Acm clock
4. srts(4) - Srts clock
5. invalidClo… | column | Enumeration | .1.3.6.1.4.1.2011.5.11.3.1.2 |
| hwAtmCesPortCfgState Indicates the configuration status of the subscriber type.
Options:
1. notConfigUserType(1) - Did not configure
2. configVoiceUserType(2) - Configured MG PRA subscriber
3. confi… | column | Enumeration | .1.3.6.1.4.1.2011.5.11.3.1.20 |
| hwAtmCesPortCfgSignalType Signal type of port.
Options:
1. ccs(1) - CCS signal
2. cas(2) - CAS signal
3. invalidSignal(-1) - Invalid signal | column | Enumeration | .1.3.6.1.4.1.2011.5.11.3.1.3 |
| hwAtmCesPortCfgFrameVerifyMode Frame verify mode of port.
Mode adapt is used for SDT mode only.
Options:
1. enable(1) - Open frame verify
2. disable(2) - Close frame verify
3. adapt(3… | column | Enumeration | .1.3.6.1.4.1.2011.5.11.3.1.4 |
| hwAtmCesPortTimeSlotBMP Timeslot bitmap of port, 0 is the initial value of timeslot bitmap. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.11.3.1.5 |
| hwAtmCesPortCfgWarningStatus Alarm state of port. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.11.3.1.6 |
| hwAtmCesPortCfgUtopiaStatus UTOPIA port state.
Options:
1. normal(1) - Normal state
2. test(2) - Test state
3. idle(3) - Idle state
4. notExist(4) - Does not exist
5. fail(5) - Fail state
6. bl… | column | Enumeration | .1.3.6.1.4.1.2011.5.11.3.1.7 |
| hwAtmCesPortCfgLiuStatus LIU port state.
Options:
1. normal(1) - Normal state
2. test(2) - Test state
3. idle(3) - Idle state
4. notExisted(4) - Does not exist
5. fail… | column | Enumeration | .1.3.6.1.4.1.2011.5.11.3.1.8 |
| hwAtmCesPortCfgImpedance Impedance of port.
Options:
1. ohm75(1) - 75 ohm
2. ohm120(2) - 120 ohm
3. ohm100(3) - 100 ohm
4. invalidImpedance(-1) - Invalid impedance | column | Enumeration | .1.3.6.1.4.1.2011.5.11.3.1.9 |