hwAncpAnPartitionTable
HUAWEI-ANCP-AN-EXT-MIB ·
.1.3.6.1.4.1.2011.5.110.1.7
Object
table
This table is used to configure the circuit IDs in batches for all ports in a certain partition on an access node. This table can only used to get the circuit IDs of one port assoicated with the partition. If you need to obtain the current circuit ID configured for a certain port, you can specify a port to be queried in hwAncpAnInterfaceConfigTable. The index of this table is hwAncpAnPartitionId.
Context
- MIB
- HUAWEI-ANCP-AN-EXT-MIB
- OID
.1.3.6.1.4.1.2011.5.110.1.7- Type
- table
- Status
- current
- Parent
- hwAncpAnObjects
- Siblings
- 14
- Children
- 1
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwAncpAnTopoDiscoveryMode The object indicates the mode of reporting ANCP topology discovery.
Enumerated value.
Options:
1. port(1) -indicates the mode of reporting ANCP topology discovery is port… | scalar | Enumeration | .1.3.6.1.4.1.2011.5.110.1.1 |
| hwAncpAnPonInterfaceConfigTable An entry in the table showing the partition id for a specific user on an ont.
The indexes of this table are ifIndex and hwAncpAnPonInterfaceOntId. | table | - | .1.3.6.1.4.1.2011.5.110.1.10 |
| hwAncpProxyStatus ANCP proxy function switch.
Options:
1. enable(1) -indicates the ANCP proxy function switch is on
2. disable(2) -indicates the ANCP proxy function switch is off
Default:… | scalar | Enumeration | .1.3.6.1.4.1.2011.5.110.1.11 |
| hwAncpTcpListenPortNumber This object is used to configure the ANCP listen tcp port.
Range: 1024-49151
Default: 6068 | scalar | Unsigned32 | .1.3.6.1.4.1.2011.5.110.1.12 |
| hwAncpProxySubSessionConfigTable This table represents the ANCP sessions in the network access server.
An entry in this table needs to be configured
(created) before an ANCP session might be started.
The index o… | table | - | .1.3.6.1.4.1.2011.5.110.1.13 |
| hwAncpProxyCurrentSubSessionTable This table gives actual information of the sessions
in the network access server.
A row in this table is created when the corresponding row
in the hwAncpProxySubSessionConfigTable… | table | - | .1.3.6.1.4.1.2011.5.110.1.14 |
| hwAncpProxySubSessionStatisticTable It is the Huawei proprietary ANCP session statistics table. It is
queried to obtain the ANCP session statistics. It supports the query
sand clear functions.
The index of this t… | table | - | .1.3.6.1.4.1.2011.5.110.1.15 |
| hwAncpAnDraftVersion ANCP draft version.
Options:
1. draft00(0) -indicates that draft draft-wadhwa-gsmp-l2control-configuration-00 is supported
2. draft01(1) -indicates that draft draft-ietf-ancp-pro… | scalar | Enumeration | .1.3.6.1.4.1.2011.5.110.1.2 |
| hwAncpAnPortBegin This object is used to configure the start port ID in the circuit ID information of the ANCP message.
Range: 0-1
Default: 0 | scalar | Unsigned32 | .1.3.6.1.4.1.2011.5.110.1.3 |
| hwAncpAnSessionConfigTable This table represents the ANCP sessions in the access node. An entry in this table needs to be configured (created)
before an ANCP session might be started.
The index of this tab… | table | - | .1.3.6.1.4.1.2011.5.110.1.4 |
| hwAncpAnCurrentSessionTable It is the Huawei proprietary ANCP session status table. It is queried to
obtain the cause of failure to establish a session and check whether
the cause is inconsistency in capab… | table | - | .1.3.6.1.4.1.2011.5.110.1.5 |
| hwAncpAnInterfaceConfigTable An entry in the table showing the partition id for a
specific user facing interface.
The index of this table is ifIndex. | table | - | .1.3.6.1.4.1.2011.5.110.1.6 |
| hwAncpAnSessionStatisticTable It is the Huawei proprietary ANCP session statistics table. It is
queried to obtain the ANCP session statistics. It supports the query
sand clear functions.
The index of this t… | table | - | .1.3.6.1.4.1.2011.5.110.1.8 |
| hwAncpAnTraps | node | - | .1.3.6.1.4.1.2011.5.110.1.9 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwAncpAnPartitionEntry This table is used to configure the circuit IDs in batches for all ports in a
certain partition on an access node. This table can only used to get the circuit
IDs of one port ass… | row | - | .1.3.6.1.4.1.2011.5.110.1.7.1 |