hwAclUserSrcUserGroupNum

HUAWEI-ACL-MIB · .1.3.6.1.4.1.2011.5.1.1.7.1.33
MIB view Table view

Object

column r/w Integer32 
The object indicates the source user group num of this rule.
if modetype source is user, null sting means any user

Context

MIB
HUAWEI-ACL-MIB
OID
.1.3.6.1.4.1.2011.5.1.1.7.1.33
Type
column
Access
readwrite
Status
current
Parent
hwAclUserRuleEntry
Table
hwAclUserRuleTable
Siblings
34

Syntax

Integer32

Values & Constraints

Object Constraints
range: 0-64000 range: 65535-65535

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hwAclUserAclNum
The index of user acl table, the index range is (6000..9999).
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.5.1.1.7.1.1
hwAclUserDestIp
The object indicates the destination IP-address of an User acl rule.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.2011.5.1.1.7.1.10
hwAclUserDestWild
The object indicates the destination IP-address wild of an User acl rule.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.2011.5.1.1.7.1.11
hwAclUserDestOp
The object indicates the destination Port operation symbol of an User acl group. It compares the port operators of destination address. 'lt' means less than, 'eq' means equal to, …
columnEnumeration.1.3.6.1.4.1.2011.5.1.1.7.1.12
hwAclUserDestPort1
The object indicates the fourth layer destination port1.
columnInteger32.1.3.6.1.4.1.2011.5.1.1.7.1.13
hwAclUserDestPort2
The object indicates the fourth layer destination port2.
columnInteger32.1.3.6.1.4.1.2011.5.1.1.7.1.14
hwAclUserPrecedence
The object indicates the value of IP-packet's precedence, It filters packets according to precedence field.The invalid value is 255.
columnInteger32.1.3.6.1.4.1.2011.5.1.1.7.1.15
hwAclUserTos
The object indicates the value of IP-packet's TOS, It filters packets according to type of service.The invalid value is 255.
columnInteger32.1.3.6.1.4.1.2011.5.1.1.7.1.16
hwAclUserDscp
The object indicates the value of frame.The invalid value is 255.
columnInteger32.1.3.6.1.4.1.2011.5.1.1.7.1.17
hwAclUserEstablish
The object indicates whether or not establishing.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2011.5.1.1.7.1.18
hwAclUserTimeRangeIndex
The object indicates the time range of an User acl rule. When the current time is in the time range, the rule is valid. Zero value declares that the acl rule has no time range. T…
columnInteger32.1.3.6.1.4.1.2011.5.1.1.7.1.19
hwAclUserSubitem
The object specifies the number of an User ACL rule. If the number specified has been assigned to an ACL rule, the new rule will overwrite the old one, which is equal to editing…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.1.1.7.1.2
hwAclUserIcmpType
The object indicates the type of ICMP packet. It filters ICMP packets according to the ICMP message type. The invalid value is 65535.
columnInteger32.1.3.6.1.4.1.2011.5.1.1.7.1.20
hwAclUserIcmpCode
The object indicates the code of ICMP packet. It filters ICMP packets according to the message code. The invalid value is 65535.
columnInteger32.1.3.6.1.4.1.2011.5.1.1.7.1.21
hwAclUserFragments
The object indicates whether or not matching fragmented packet, It specifies that this rule is only valid for the non-first fragment packets.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2011.5.1.1.7.1.22
hwAclUserLog
The object indicates whether to log the matched packets. The log contents include sequence number of ACL rule, packets passed or discarded, upper layer protocol type over IP, s…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2011.5.1.1.7.1.23
hwAclUserEnable
The object indicates whether the rule is valid or invalid.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2011.5.1.1.7.1.24
hwAclUserCount
The object indicates the statistics of matched packets by the rule.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.5.1.1.7.1.25
hwAclUserVrfName
The object indicates the VRF name of this rule, It specifies the VPN-instance to which the packet belongs.
columnOctetString.1.3.6.1.4.1.2011.5.1.1.7.1.26
hwAclUserSrcUserGroupName
The object indicates the source user group name of this rule. if modetype source is user, null sting means any user
columnOctetString.1.3.6.1.4.1.2011.5.1.1.7.1.27
hwAclUserDestUserGroupName
The object indicates the destination user group name of this rule. if modetype destination is user, null sting means any user
columnOctetString.1.3.6.1.4.1.2011.5.1.1.7.1.28
hwAclUserSrcModeType
The object indicates ACL's mode type, Now support four state 0 Any match rule from any user group or any ip subnet, 1 NetAny match rule from any ip subnet, 2 UserAny …
columnInteger32.1.3.6.1.4.1.2011.5.1.1.7.1.29
hwAclUserAct
The object indicates the action of an User acl rule. 'deny' means discarding the packets that meet the condition, 'permit' means permitting the packets that meet the condition.
columnEnumeration.1.3.6.1.4.1.2011.5.1.1.7.1.3
hwAclUserDestModeType
The object indicates ACL's mode type, Now support four state 0 Any match rule from any user group or any ip subnet or any doamin name, 1 NetAny match rule from any ip …
columnInteger32.1.3.6.1.4.1.2011.5.1.1.7.1.30
hwAclUserRowStatus
RowStatus, Now support three state: CreateAndGo, Active, Destroy.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.2011.5.1.1.7.1.31
hwAclUserTcpSyncFlag
The object indicates the code of TCP Sync flag(0~63), The invalid value is -1.
columnInteger32.1.3.6.1.4.1.2011.5.1.1.7.1.32
hwAclUserDestUserGroupNum
The object indicates the destination user group name of this rule. if modetype destination is user, null sting means any user
columnInteger32.1.3.6.1.4.1.2011.5.1.1.7.1.34
hwAclUserDestDomainName
The object indicates the destination domain name of this rule. if modetype destination is domain, null sting means any domain.
columnOctetString.1.3.6.1.4.1.2011.5.1.1.7.1.35
hwAclUserProtocol
The object indicates the protocol type of the rule. It specifies the protocol type over IP. The number of IP protocol is 0.
columnInteger32.1.3.6.1.4.1.2011.5.1.1.7.1.4
hwAclUserSrcIp
The object indicates the source IP-address of an User acl rule.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.2011.5.1.1.7.1.5
hwAclUserSrcWild
The object indicates the source IP-address wild of an User acl rule.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.2011.5.1.1.7.1.6
hwAclUserSrcOp
The object indicates the source Port operation symbol of an User acl rule. It compares the port operators of source address. 'lt' means less than, 'eq' means equal to, 'gt' means …
columnEnumeration.1.3.6.1.4.1.2011.5.1.1.7.1.7
hwAclUserSrcPort1
The object indicates the fourth layer sourec port 1. It specifies the source port information of UDP or TCP packets.
columnInteger32.1.3.6.1.4.1.2011.5.1.1.7.1.8
hwAclUserSrcPort2
The object indicates the fourth layer source port2.
columnInteger32.1.3.6.1.4.1.2011.5.1.1.7.1.9